MCSO1E family package 8×4 mm T range up to 210°C DIMENSIONS Package: Bottom view Recommended Solder Pad: 2,00 4 1 3,70 1,52 1 4 2 3 3,60 Frequency stability included 1000h at Tmax ELECTRICAL CHARACTERISTICS AT +25°C 2,54 3 2 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd All dimensions in mm typical 100% Leadfree, RoHScompliant: SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request 3,18 1,6 1,16 1,6 2,54 7,86 DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. Applications: - Downhole and Well drilling equipments -Avionics - Airbone equipments - Geothermal equipments - Fire fighter equipments The MCSO1's are supplied on trays (91 pcs / tray) For pick-and-place equipment, the parts are available in 16mm tapes with 250 parts min 1000 parts max Frequency stability Over temperature range C = -55 to +125°C (see ordering info) Including 2)* Frequency stability Over temperature range E = -55 to +150°C (see ordering info) Including 2)* Frequency stability Over temperature range D = -55 to +175°C (see ordering info) Including 2)* Frequency stability Over temperature range G = -55 to +210°C (see ordering info) Including 2)* Supply voltage ± 5% 1)* Input current ΔF/F ≤ ± 100 ppm ΔF/F ≤ ± 150 ppm ΔF/F ≤ ± 300 ppm ΔF/F ≤ ± 400 ppm Vdd 2.5 / 3.3 / 5 V Idd see table 1 Output signal HC-MOS compatible Symmetry at Vdd/2 Rise & fall time ≤ 20MHz For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) Rise & fall time ≥ 20MHz for (load 15pf 10% to 90%) Level "0" & "1" Start-up time Load min / max t 40 / 60 % ≤7 ns ≤3 ns <0.4>Vdd-0.5 V <5 ms 3/47 pF * 1) C = 47nF ceramic must be connected between GND & Vdd Operable over 2.3 to 5.5V * 2)adjustment at +25°C, long term aging 1000h at Tmax ordered over supply voltage ±5% and over load min to max Table 1: Idd (Without load) Frequency F=32 kHz F=< 10MHz ≤ 20MHz >20 to 100MHz W=Vdd = 2.5V < 300μA < 2mA < 3mA < 15mA V=Vdd = 3.3V < 1mA < 4mA < 5mA < 20mA blank=Vdd = 5V < 2mA < 6mA < 7mA < 30mA STANDARD FREQUENCIES: Frequency «MHz» 0.032768 3.6864 4 8 10 12 14.7456 16 20 24 40 48 12.8 Other frequencies from 32 kHz up to 100 MHz on request ENVIRONMENTAL Storage temp. range CHARACTERISTICS: -65 to +125°C Vibration resistance 10 to 2000Hz / 40g Shocks resistance 10000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 8 x 4 x 2mm Lids (standard) Kovar Lids (on request) Ceramic Height 2.5mm type MCSO1EC Terminations option T3 on request (not available on G temperature range) with tinned Ag/Cu/Zn Pin 1 open→ Pin 3 Clock H → Clock L → Low E/D option 1 on request Reaction time ˂ 1μs - No power E/D function (pin 1) before Vdd is setting on - E/D option not available for F ˂ 500 kHz - E/D option on request (very low consumption in disable mode). PRODUCT DESCRIPTION AND ORDERING INFORMATION: MCSO1E C H V - D 20MHz C = Ceramic lids blank = Kovar lids H blank ˃ 20MHz ≤ 20MHz W V blank = Vdd 2.5V = Vdd 3.3V = Vdd 5V C E D G X = -55 to 125°C = -55 to 150°C = -55 to 175°C = -55 to 210°C = custom E/D T3 XXX option 1 E/D enable / disable option 2 blank Au plasted T3 = tinned customer spec N° Frequency A unique part number will be generated for each product specification: i.e: 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity) All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 11/08.2015