MCSO1EL very low consumption 32.768 kHz T range

MCSO1EL
very low consumption 32.768 kHz
T range up to 200°C
DIMENSIONS
Package:
Bottom view
Recommended Solder Pad:
2,00
4
1
3,70
1,52
1
4
2
3
3,60
Frequency stability
included 1000h at Tmax
ELECTRICAL
CHARACTERISTICS AT +25°C
2,54
3
2
pin 1 E/D
pin 2 GND
pin 3 Fout
pin 4 Vdd
All dimensions in mm typical
100% Leadfree, RoHScompliant:
SMT Clock oscillator in ceramic
package
Fundamental quartz mode frequency
High shock and vibration resistance
Wide temperature range
Low aging
Ultra low MSL
Very fast start-up
Excellent solderability
Swiss made quality
Customer specification on request
3,18
1,6 1,16 1,6
2,54
7,86
DESCRIPTION:
This SMD oscillator in ceramic package has been specially designed for
surface mount using infrared, vapor phase or epoxy techniques.
Applications:
- Downhole and Well drilling equipments
-Avionics
- Airbone equipments
- Geothermal equipments
- Fire fighter equipments
The MCSO1's are supplied on trays (91 pcs / tray)
For pick-and-place equipment, the parts are
available in 16mm tapes with 250 parts min
1000 parts max
Frequency stability
Over temperature range C = -55 to +125°C
(see ordering info) Including 2)*
ΔF/F
≤ ± 100
ppm
Frequency stability
Over temperature range E = -55 to +150°C
(see ordering info) Including 2)*
ΔF/F
≤ ± 150
ppm
Frequency stability
Over temperature range D = -55 to +175°C
(see ordering info) Including 2)*
ΔF/F
≤ ± 300
ppm
Frequency stability
Over temperature range G = -55 to +200°C
(see ordering info) Including 2)* 3)*
ΔF/F
≤ ± 400
ppm
Supply voltage ± 5%
Vdd
2.5 / 3.3 / 5
V
Input current
1)*
Idd
Output signal
Symmetry at Vdd/2
Rise & fall time
(load 15pf 20% to 80%)
Level "0" & "1"
Start-up time
Load min / max
see table 1
HC-MOS compatible
t
40 / 60
%
25
ns
<0.4>Vdd-0.5
V
<5
ms
3/27
pF
* 1) C = 47nF ceramic must be connected between GND & Vdd
Operable over 2.3 to 5.5V
* 2)adjustment at +25°C, long term aging 1000h at Tmax ordered
over supply voltage ±5% and over load min to max
* 3)Only available with Supply voltage 5V
Table 1: Idd
Frequency
(With load 10pF)
F=32 kHz
W=Vdd = 2.5V
< 100μA
V=Vdd = 3.3V
< 110μA
blank=Vdd = 5V
< 120μA
STANDARD FREQUENCIES:
Frequency «kHz»
32.768
Other frequencies from up to 50 kHz on request
ENVIRONMENTAL
CHARACTERISTICS:
Storage temp. range
-65 to +125°C
Vibration resistance
10 to 2000Hz / 40g
Shocks resistance
10000g / 0.3ms / ½ sine
TERMINATIONS AND
PROCESSING:
Reflow soldering
+260°C / 10s max
Package
Ceramic 8 x 4 x 2mm
Lids (standard)
Kovar
Lids (on request)
Ceramic Height 2.5mm type MCSO1ELC
Terminations option T3 on request
(not available on G temperature range)
with tinned Ag/Cu/Zn
Pin 1 open→ Pin 3 Clock
H → Clock
L → Low
E/D option 1 on request
Reaction time ˂ 5mS
- No power E/D function (pin 1) before Vdd is setting on
- Disable option (consumption ≤5μA).
PRODUCT DESCRIPTION AND
ORDERING INFORMATION:
MCSO1EL
C V - D 32kHz
C
= Ceramic lids
blank = Kovar lids
W
V
blank
= Vdd 2.5V
= Vdd 3.3V
= Vdd 5V
C
E
D
G
X
= -55 to 125°C
= -55 to 150°C
= -55 to 175°C
= -55 to 200°C
= custom
E/D
T3 XXX
option 1 E/D
enable / disable
option 2
blank Au plasted
T3 = tinned
customer
spec N°
Frequency
A unique part number will be generated for each product specification: i.e:
20xxxx-EA00
xxx pcs (in ESD plastic tray)
200xxx-ML00
xxx pcs (in tape & reel, any quantity)
All specifications subject to change without notice.
Micro Crystal AG
Mühlestrasse 14
CH-2540 Grenchen
Switzerland
Tel. +41 32 655 82 82
Fax +41 32 655 82 83
[email protected]
www.microcrystal.com
Version 11/08.2015