MCSO1ELS T range up to 200°C low consumption 32.768 kHz SC cut quartz Crystal DIMENSIONS Package: Bottom view Recommended Solder Pad: 2,00 4 1 3,70 1,52 1 4 2 3 3,60 Frequency stability included 1000h at Tmax ELECTRICAL CHARACTERISTICS AT +25°C 2,54 3 2 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd All dimensions in mm typical 100% Leadfree, RoHScompliant: SC cut quartz crystal SMT Clock oscillator in ceramic package Fundamental quartz mode frequency Ultra Low stability High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request 3,18 1,6 1,16 1,6 2,54 7,86 DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. Applications: - Downhole and Well drilling equipments -Avionics - Airbone equipments - Geothermal equipments - Fire fighter equipments The MCSO1's are supplied on trays (91 pcs / tray) For pick-and-place equipment, the parts are available in 16mm tapes with 250 parts min 1000 parts max Frequency stability Over temperature range R = -10 to +150°C (see ordering info) Including 2)* ΔF/F ≤ ± 50 ppm Frequency stability Over temperature range S = -10 to +175°C (see ordering info) Including 2)* ΔF/F ≤ ± 100 ppm Frequency stability Over temperature range T = -10 to +200°C (see ordering info) Including 2)* 3)* ΔF/F ≤ ± 150 ppm Supply voltage ± 5% Vdd 2.5 / 3.3 / 5 V Input current 1)* Idd Output signal Symmetry at Vdd/2 Rise & fall time (load 15pf 20% to 80%) Level "0" & "1" Start-up time Load min / max see table 1 HC-MOS compatible t 40 / 60 % 25 ns <0.4>Vdd-0.5 V <5 ms 3/27 pF * 1) C = 47nF ceramic must be connected between GND & Vdd Operable over 2.3 to 5.5V * 2)adjustment at +25°C, long term aging 1000h at Tmax ordered over supply voltage ±5% and over load min to max * 3)Only available with Supply voltage 5V Table 1: Idd Frequency (With load 10pF) F=32 kHz W=Vdd = 2.5V < 100μA V=Vdd = 3.3V < 110μA blank=Vdd = 5V < 120μA STANDARD FREQUENCIES: Frequency «kHz» 32.768 Other frequencies on request ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance 10 to 2000Hz / 40g Shocks resistance 10000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 8 x 4 x 2mm Lids (standard) Kovar Lids (on request) Ceramic Height 2.5mm type MCSO1ELSC Terminations option T3 on request (not available on G temperature range) with tinned Ag/Cu/Zn Pin 1 open→ Pin 3 Clock H → Clock L → Low E/D option 1 on request Reaction time ˂ 5mS - No power E/D function (pin 1) before Vdd is setting on - Disable option (consumption ≤5μA). PRODUCT DESCRIPTION AND ORDERING INFORMATION: MCSO1ELS C V - S 32kHz C = Ceramic lids blank = Kovar lids W V blank = Vdd 2.5V = Vdd 3.3V = Vdd 5V R S T X = -10 to 150°C = -10 to 175°C = -10 to 200°C = custom E/D T3 XXX option 1 E/D enable / disable option 2 blank Au plasted T3 = tinned customer spec N° Frequency A unique part number will be generated for each product specification: i.e: 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity) All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 1.0/08.2015