CPC1964B

CPC1964B
AC Power Switch
INTEGRATED CIRCUITS DIVISION
Parameter
AC Operating Voltage
Load Current
On-State Voltage Drop
Blocking Voltage
Rating
20 - 280
1.5
1.4
800
Units
Vrms
Arms
VP (at IL = 1.5AP)
VP
Features
•
•
•
•
•
•
•
•
•
•
•
•
Load Current up to 1.5Arms
800VP Blocking Voltage
5mA Sensitivity
5000Vrms Input to Output Isolation
Off-State dV/dt: 1000V/s Minimum
12.5mm External Creepage Distance with
Appropriate Layout
Zero-Cross Switching
DC Control, AC Output
Optically Isolated
TTL and CMOS Compatible
Low EMI and RFI Generation
High Noise Immunity
Description
CPC1964B is an AC Solid State Switch utilizing
dual power SCR outputs. This device also includes
zero-cross turn-on circuitry and is specified with a
blocking voltage of 800VP .
In addition, the tightly controlled zero-cross circuitry
ensures low noise switching of AC loads by minimizing
the generation of transients. The optically coupled
input and output circuits provide 5000Vrms of isolation
between the control and load circuits. As a result, the
CPC1964B is well suited for industrial environments
where electromagnetic interference would disrupt the
operation of plant facility communication and control
systems.
Approvals
• UL 508 Certified Component: File E69938
• CSA Industrial Control Switches Approval: Pending
Ordering Information
Applications
•
•
•
•
•
•
•
•
•
•
•
Programmable Control
Process Control
Power Control Panels
Remote Switching
Gas Pump Electronics
Contactors
Large Relays
Solenoids
Motors
Heaters
Meters
Part #
CPC1964B
Description
8-Pin Power SOIC (25/Tube)
Pin Configuration
8
AC Load
7
AC Load
5
ZC
1
N/C
DS-CPC1964B-R03
6
www.ixysic.com
2
+ LED
3
– LED
4
N/C
1
INTEGRATED CIRCUITS DIVISION
CPC1964B
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage (VDRM)
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage Input to Output
ESD, Human Body Model
i2t for Fusing (1/2 Sine Wave, 50Hz)
Operational Temperature
Storage Temperature
1
Derate linearly 1.33 mW / ºC
2
Derate linearly 20 mW / ºC
Ratings
800
5
50
1
150
2400
5000
4
1.6
-40 to +85
-40 to +125
Units
VP
V
mA
A
mW
mW
Vrms
kV
A2s
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Electrical Characteristics @ 25ºC
Parameters
Output Characteristics
Load Current, Continuous
Maximum Surge Current
Off State Leakage Current
On-State Voltage Drop 1
Off-State dV/dt
Switching Speeds
Turn-on
Turn-off
Zero-Cross Turn-On Voltage 2
Holding Current
Latching Current
Operating Frequency
Load Power Factor for
Guaranteed Turn-On 3
Input Characteristics
Input Control Current to Activate 4
Input Drop-out Voltage to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Input to Output Capacitance
Conditions
Symbol
Min
Typ
Max
Units
VL=120-280Vrms
t < 20ms
IF=0mA, VL=VDRM
IF=5mA, IL=1.5AP
IF=0mA
IL
IP
0.1
1000
1.21
-
1.5
16
100
1.4
-
Arms
AP
AP
VP
V/s
ton
toff
IH
IL
20
5
-
0.5
0.5
20
5
75
75
500
cycles
cycles
V
V
mA
mA
Hz
f=60Hz
PF
0.25
-
-
-
f=60Hz, IL=1A Resistive
IF=5mA
VR=5V
IF
VF
IR
0.8
0.9
-
1.2
-
5
1.4
10
mA
V
V
A
-
CI/O
-
-
3
pF
IF = 5 mA
1st half cycle
Subsequent half cycle
-
ILEAK
dV/dt
1
Tested at a peak value equivalent.
2 Zero Cross 1st half cycle @ <100Hz.
3 Snubber circuits may be required at low power factors.
4 For high-noise environments, or for high-frequency operation, use I > 10mA.
F
2
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
CPC1964B
PERFORMANCE DATA* (@25ºC Unless Otherwise Noted)
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
35
35
20
15
10
25
20
15
10
10
5
0
0
0
1.25
1.26
1.27
1.28
1.29
LED Forward Voltage (V)
30
Typical IF for Switch Operation
Resistive Load
(N=50, IL=1.5A, VL=120VAC, 60Hz)
15
10
35
25
20
15
10
0
0.8
1.0
1.2
1.4
1.6
LED Forward Current (mA)
1.6
1.4
LED Forward Current (mA)
1.5
1.3
1.2
1.1
850
865
880
895
910
Blocking Voltage (VP)
2.8
2.7
2.6
2.5
2.4
2.3
2.2
80
100
-40
Typical IF for Switch Operation
vs. Load Frequency (Resistive)
(IL=4.91Arms, VP=67V, RL=10:)
-20
0
20
40
60
Temperature (ºC)
80
8.0
7.5
7.0
100
200
300
400
Load Frequency (Hz)
500
2.55
2.50
-40
-20
0
20
40
60
Temperature (ºC)
80
100
80
100
Holding Current
(RL=1.9:)
70
60
50
40
30
20
6.5
0
2.60
80
2.2
2.0
2.65
Holding current (mA)
Zero-Cross (V)
2.4
2.70
First Zero-Cross Turn-On Voltage
(IF=5mA, RL=120:)
8.5
2.6
2.75
100
3.0
2.8
2.80
2.45
2.1
20
40
60
Temperature (ºC)
925
Typical IF for Switch Operation
Inductive Load
(IL=500mA, 60Hz, 200mH)
2.85
LED Forward Current (mA)
2.9
IF=50mA
IF=20mA
IF=10mA
IF=5mA
1.8
Typical IF for Switch Operation
Resistive Load
(IL=350mA, 60Hz)
Typical LED Forward Voltage Drop
vs. Temperature
3.2
8.0
5
0.6
0
5.5 6.0 6.5 7.0 7.5
Zero Cross Voltage (V)
Typical Blocking Voltage Distribution
(N=50)
Device Count (N)
Device Count (N)
20
0
-20
5.0
30
5
-40
4.5
1.200 1.205 1.210 1.215 1.220 1.225 1.230
Forward Voltage (VP)
1.30
25
LED Forward Voltage (V)
15
5
5
LED Forward Current (mA)
20
Device Count (N)
Device Count (N)
25
First Zero-Cross Turn-On
Voltage Distribution
(N=50, IF=5mA)
25
30
30
Device Count (N)
On-State Forward Voltage Drop
(N=50, IF=5mA, IL=1.5A)
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-40
-20
0
20
40
60
Temperature (ºC)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R03
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1964B
PERFORMANCE DATA* (@25ºC Unless Otherwise Noted)
Typical Load Current
vs. Load Voltage
(IF=5mA)
On-State Voltage vs. Temperature
IL=1.5A
1.15
1.10
IL=1A
1.05
1.00
IL=0.5A
0.95
-20
0
20
40
60
Temperature (ºC)
80
100
-0.5
0.0
0.5
1.0
Leakage Current (PA)
1000
950
900
0
20
40
60
Temperature (ºC)
1.00
0.75
0.50
-40
1.5
-20
80
100
20
40
60
Temperature (ºC)
80
100
Maximum Surge Current vs. Time
VL=800V
VL=300V
1
0.1
0.01
0.001
-40
0
20
10
-20
1.25
Typical Leakage Current
vs. Temperature
1050
Blocking Voltage (VP)
-1.0
1.50
Load Voltage (V)
Typical Blocking Voltage
vs. Temperature
850
-40
1.75
@ 85ºC
@ 25ºC
@ -40ºC
Load Current (AP)
-40
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-1.5
Load Current (Arms)
1.20
Load Current (A)
On-State Voltage (VP)
1.25
Maximum Load Current
vs. Temperature
(IL=5mA)
-20
0
20
40
60
Temperature (ºC)
80
100
15
10
5
0
100Ps
1ms
10ms 100ms
1s
Time (ms)
10s
100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
CPC1964B
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1964B
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
CPC1964B
245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R03
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1964B
Mechanical Dimensions
CPC1964B
21.082 ± 0.381
(0.830 ± 0.015)
Pin 8
16.764 ± 0.381
(0.660 ± 0.015)
3.302 ± 0.051
(0.130 ± 0.002)
0.127 ± 0.076
(0.005 ± 0.003)
15.90
(0.626)
10.160 ± 0.254
(0.400 ± 0.010)
2.00
(0.079)
0.889 ± 0.127
(0.035 ± 0.005)
Pin 1
0.762 ± 0.102
(0.030 ± 0.004)
5.080 ± 0.127
(0.200 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
Recommended PCB Pattern
1.524 typ
(0.060)
1.016 ± 0.127
(0.040 ± 0.005)
1.651 ± 0.102
(0.065 ± 0.004)
5.080 ± 0.127
(0.200 ± 0.005)
0.381 ± 0.025
(0.015 ± 0.001)
Dimensions
Unless Otherwise Noted
mm
(inches)
Note: Pin-to-pin tolerances are non-cumulative.
5.080
(0.200)
7.622
(0.300)
5.080
(0.200)
0.95
(0.037)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1964B-R03
©Copyright 2013, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
10/18/2013