CPC1966

CPC1966
AC Power Switch
INTEGRATED CIRCUITS DIVISION
Parameter
AC Operating Voltage
Load Current
On-State Voltage Drop
Blocking Voltage
Rating
20 - 240
3
0.8
600
Units
Vrms
Arms
Vrms (at IL = 3Arms)
VP
Features
•
•
•
•
•
•
•
•
•
•
Load Current up to 3Arms
600VP Blocking Voltage
5mA Sensitivity
Zero-Crossing Detection
DC Control, AC Output
Optically Isolated
TTL and CMOS Compatible
Low EMI and RFI Generation
High Noise Immunity
Machine Insertable, Wave Solderable
Applications
•
•
•
•
•
•
•
•
•
•
Programmable Control
Process Control
Power Control Panels
Remote Switching
Gas Pump Electronics
Contactors
Large Relays
Solenoids
Motors
Heaters
Description
CPC1966 is an AC Solid State Switch utilizing
dual power SCR outputs. This device also includes
zero-cross turn-on circuitry, and is specified with a
blocking voltage of 600VP .
In addition, the tightly controlled zero-cross circuitry
ensures low noise switching of AC loads by
minimizing the generation of transients. The optically
coupled input and output circuits provide 3750Vrms of
isolation and noise immunity between the control and
load circuits. As a result, the CPC1966 is well suited
for industrial environments where electromagnetic
interference would disrupt the operation of plant facility
communication and control systems.
Approvals
• UL Recognized Component: File E69938
• CSA Certified Component: File 043639
Ordering Information
Part #
CPC1966Y
Description
4-Pin (8-Pin Body) SIP (25/Tube)
Pin Configuration
ZC
1
2
– LED + LED
DS-CPC1966-R04
www.ixysic.com
3
4
AC Load AC Load
1
INTEGRATED CIRCUITS DIVISION
CPC1966
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage (VDRM)
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Derate linearly 1.33 mW / ºC
2
Derate linearly 20 mW / ºC
Ratings
600
5
50
1
150
2400
3750
-40 to +85
-40 to +125
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Electrical Characteristics @ 25ºC
Parameters
Output Characteristics
Load Current, Continuous
Maximum Surge Current
Off State Leakage Current
On-State Voltage Drop 1
Off-State dV/dt
Switching Speeds
Turn-on
Turn-off
Zero-Cross Turn-On Voltage 2
Holding Current
Latching Current
Operating Frequency
Load Power Factor for
Guaranteed Turn-On 3
Input Characteristics
Input Control Current to Activate 4
Input Drop-out Voltage
Input Voltage Drop
Reverse Input Current
Common Characteristics
Input to Output Capacitance
Conditions
Symbol
Min
Typ
Max
Units
VL=120-240Vrms
t < 16ms
VDRM
IL=2AP
-
IL
IP
0.1
500
0.88
-
3
30
100
1.1
-
Arms
A
AP
VP
V/s
ton
toff
IH
IL
20
5
44
48
-
0.5
0.5
20
5
50
75
500
cycles
cycles
V
V
mA
mA
Hz
60Hz
PF
0.25
-
-
-
60Hz
IF=5mA
VR=5V
IF
VF
IR
0.8
0.9
-
1.2
-
5
1.4
10
mA
V
V
A
-
CI/O
-
-
3
pF
IF = 5 mA
1st half-cycle
Subsequent half-cycle
-
ILEAK
dV/dt
1
Tested at a peak value equivalent.
2 Zero Cross 1st half-cycle @ <100Hz.
3 Snubber circuits may be required at low power factors.
4 For high-noise environments, or for high-frequency operation, use I > 10mA.
F
2
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1966
PERFORMANCE DATA*
35
25
Device Count (N)
Device Count (N)
30
25
20
15
10
5
LED Current to Operate Distribution
(60Hz Resistive Load)
(N=50, VL=120VAC, TA=25ºC)
20
15
10
5
0
0
1.25
1.26
1.27
1.28
1.29
LED Forward Voltage (V)
1.40
1.30
1.44
1.48
1.52
30
30
25
Device Count (N)
Device Count (N)
35
25
20
15
10
1.60
0.88 0.90 0.92 0.94 0.96
SCR Forward Voltage (V)
5
0
1.64
4.0
4.3
4.6
4.9
5.2
5.5
Zero Cross Voltage (V)
5.8
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
20
15
10
1.6
2.8
IF=50mA
0.98
850
852
854
856
858
Blocking Voltage (VP)
LED Current to Operate
vs. Load Frequency
(VL=140Vrms, RL=400:)
LED Forward Voltage vs. Temperature
1.4
1.3
IF=10mA
1.2
3.0
LED Current (mA)
LED Current (mA)
IF=20mA
2.4
2.2
2.0
1.8
1.6
1.2
20
40
60
Temperature (ºC)
80
100
ZL=200mH
IL=500mA
2.5
2.0
RL=400:
IL=350mA
1.5
1.0
1.4
IF=5mA
860
LED Current to Operate
(fO=60Hz)
3.5
2.6
1.5
0
10
0
0.86
-20
15
5
5
0
Forward Voltage (V)
1.56
Zero Cross Voltage Distribution
(N=50, IF=5mA, TA=25ºC)
LED Current (mA)
Typical SCR Forward Voltage Distribution
(N=50, IF=5mA, IL=2A, TA=25ºC)
1.1
-40
20
Device Count (N)
LED Forward Voltage Distribution
(N=50, IF=5mA, TA=25ºC)
0
100
200
300
400
Load Frequency (Hz)
500
600
0.5
-40
-20
0
20
40
60
Temperature (ºC)
80
100
* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
R04
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1966
PERFORMANCE DATA*
Voltage Drop (VP)
Load Current (AP)
2
0
-2
0.85
0.80
-4
0.75
-6
-1.5
0.70
-40
-1.0
-0.5
0.0
0.5
Load Voltage (VP)
1.0
1.5
Leakage Current vs. Temperature
VL=600V
100
VL=300V
10
1
-40
-20
0
20
40
60
Temperature (ºC)
80
0
20
40
60
Temperature (ºC)
80
100
70
60
50
40
30
20
-40
100
-20
0
20
40
60
Temperature (ºC)
80
100
Maximum Surge Current
(Non-Repetitive)
(Values Apply to TJ=50ºC Before Surge)
920
Blocking Voltage (VP)
1000
-20
Typical Blocking Voltage
vs. Temperature
10000
Leakage Current (nA)
0.90
Holding Current vs. Temperature
(IF=0mA)
80
IL=3AP
IL=2AP
IL=1AP
0.95
4
Holding Current (mA)
1.00
Voltage Drop vs. Temperature
(IF=5mA)
35
30
880
Load Current (AP)
6
Typical Load Voltage vs. Load Current
(IF=5mA)
840
800
760
25
20
15
10
5
720
-40
-20
0
20
40
60
Temperature (ºC)
80
100
0
1
10
100
1000
Time (ms)
* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
4
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1966
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1966Y
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
CPC1966Y
245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R04
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1966
MECHANICAL DIMENSIONS
CPC1966Y
21.082±0.381
(0.830±0.015)
PCB Hole Pattern
3.302±0.051
(0.130±0.002)
10.160±0.127
(0.400±0.005)
1.75
(0.069)
7º TYP
4 Places
Pin 1
1.778
(0.070)
0.762±0.076
(0.030±0.003)
2.540±0.127
(0.100±0.005)
4.572±0.127
(0.180±0.005)
10.160±0.127
(0.400±0.005)
5.080±0.127
(0.200±0.005)
1.651±0.102
(0.065±0.004)
5.080
(0.200)
10.160
(0.400)
1.016±0.127
(0.040±0.005)
Pin 1
1.150 DIA. x4
(0.045 DIA. x4)
0.381±0.013
(0.015±0.0005)
2.540
(0.100)
1.778
(0.070)
7º TYP
4 Places
Dimensions
mm
(inches)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1966-R04
©Copyright 2013, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
10/18/2013