PLA170

PLA170
Single-Pole, Normally Open
OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
AC/DC Configuration
DC Configuration
On-Resistance (max)
AC/DC Configuration
DC Configuration
Description
Rating
800
Units
VP
100
180
mArms / mADC
mADC
50
14

Its optically coupled outputs, which use the patented
OptoMOS architecture, are controlled by a highly
efficient GaAIAs infrared LED.
Designed to replace electromechanical relays, the
PLA170 offers the superior reliability associated
with solid state devices, and provides bounce-free
switching in a more compact surface mount or
thru-hole package.
Features
•
•
•
•
•
•
•
•
PLA170 is a single-pole, normally open (1-Form-A)
Solid State Relay that uses optically coupled MOSFET
technology to provide an enhanced input-to-output
isolation of 3750Vrms.
800VP Blocking Voltage
3750Vrms Input/Output Isolation
100% Solid State
Low Drive Power Requirements (TTL/CMOS
Compatible)
Arc-Free With No Snubbing Circuits
No EMI/RFI Generation
Small 6-Pin Package
Machine Insertable, Wave Solderable
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
Applications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Ordering Information
Part #
PLA170
PLA170S
PLA170STR
Description
6-Pin DIP (50/tube)
6-Pin Surface Mount (50/tube)
6-Pin Surface Mount (1000/Reel)
Pin Configuration
AC/DC Configuration
+ Control
– Control
NC
1
6
2
5
3
4
Load
Do Not Use
Load
DC Only Configuration
+ Control
– Control
NC
1
6
2
5
3
4
+ Load
– Load
Switching Characteristics of
Normally Open Devices
Form-A
IF
90%
10%
ILOAD
Pb
DS-PLA170-R04
e3
ton
www.ixysic.com
toff
1
INTEGRATED CIRCUITS DIVISION
PLA170
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Ratings
800
5
50
1
150
800
3750
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Derate linearly 1.33 mW / ºC
Derate linearly 6.67 mW / ºC
2
Electrical Characteristcs @ 25ºC
Parameter
Output Characteristics
Load Current, Continuous
AC/DC Configuration 1
DC Configuration
Peak Load Current
On-Resistance 2
AC/DC Configuration
DC Configuration
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate 3
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Input to Output Capacitance
1
2
3
Conditions
Symbol
Min
Typ
Max
Units
-
IL
-
-
100
180
±350
mArms / mADC
mADC
mAP
t=10ms
ILPK
-
IL=Load Current
RON
-
50
14
1

ILEAK
-
VL=800VP
VL=50V, f=1MHz
ton
toff
COUT
-
50
5
5
-
IL=Load Current
IF=5mA
VR=5V
IF
IF
VF
IR
0.3
0.9
-
0.7
1.2
-
5
1.4
10
mA
mA
V
µA
-
CI/O
-
3
-
pF
IF=5mA, VL=10V
µA
ms
pF
Load derates linearly from 100mA @ 25oC to 90mA @80oC.
Measurement taken within 1 second of on-time.
For applications requiring high temperature operation (greater than 60oC) a LED drive current of 10mA is recommended.
2
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
PLA170
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted) *
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
Typical Turn-On Time
(N=50, IF=5mA, IL=100mADC)
35
25
25
20
15
10
5
35
30
20
Device Count (N)
Device Count (N)
15
10
5
1.17
25
1.19
1.21
1.23
25
20
15
10
5
0
0
0
1.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.070
0.075
0.080
0.085
0.090
LED Forward Voltage Drop (V)
Turn-On Time (ms)
Turn-Off Time (ms)
Typical IF for Switch Operation
(N=50, IL=100mADC)
Typical IF for Switch Dropout
(N=50, IL=100mADC)
Typical On-Resistance Distribution
(N=50, IL=100mADC)
25
Device Count (N)
20
15
10
5
0
35
30
20
Device Count (N)
Device Count (N)
30
Device Count (N)
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mADC)
15
10
5
0.65
0.91
1.17
1.43
1.69
20
15
10
5
0
0.39
25
0
1.95
0.39
0.65
0.91
1.17
1.43
1.69
39
1.95
40
LED Current (mA)
LED Current (mA)
41
42
43
On-Resistance (:)
44
45
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
875
880
885
890
895
900
905
Blocking Voltage (VP)
Typical Turn-On Time
vs. LED Forward Current
(IL=100mADC)
1.6
1.4
IF=50mA
1.2
IF=10mA
IF=5mA
1.0
0.8
-40
-20
0
20
40
60
Temperature (ºC)
80
100
120
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Typical Turn-Off Time
vs. LED Forward Current
(IL=100mADC)
0.35
0.30
Turn-Off Time (ms)
1.8
Turn-On Time (ms)
LED Forward Voltage Drop (V)
Typical LED Forward Voltage Drop
vs. Temperature
0.25
0.20
0.15
0.10
0.05
0
0
5
10
15
20
25
30
35
40
LED Forward Current (mA)
45
50
0
5
10
15
20
25
30
35
40
45
50
LED Forward Current (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R04
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
PLA170
Typical Turn-On Time
vs. Temperature
(IL=70mADC)
IF=5mA
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
IF=10mA
-40
3.0
-20
0
20
40
60
80
-20
0
20
10
40
60
80
100
-40
-20
0
20
40
60
80
100
Typical IF for Switch Dropout
vs. Temperature
(IL=70mADC)
Typical Load Current vs. Load Voltage
(IF=5mA)
3.0
150
Load Current (mA)
LED Current (mA)
2.0
1.5
1.0
0.5
0.0
0.0
-20
0
20
40
60
80
100
-20
0
40
60
80
100
-6
-4
-2
140
120
AC/DC Configuration
IF=5mA
80
0.040
0.035
950
0.030
900
850
800
750
40
700
80
100
120
4
6
0.025
0.020
0.015
0.010
0.005
-40
Temperature (ºC)
2
Typical Leakage vs. Temperature
Measured across Pins 4&6
1000
60
0
Load Voltage (V)
Leakage (PA)
160
60
20
1050
Blocking Voltage (VP)
IF=10mA
IF=5mA
40
-50
Typical Blocking Voltage
vs. Temperature
DC Configuration
20
0
Temperature (ºC)
220
0
50
-150
-40
Maximum Load Current
vs. Temperature
-20
100
-100
Temperature (ºC)
Load Current (mA)
20
2.5
-40
30
Typical IF for Switch Operation
vs. Temperature
(IL=70mADC)
0.5
100
40
Temperature (ºC)
1.0
180
50
Temperature (ºC)
1.5
200
60
Temperature (ºC)
2.0
-40
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=50mADC)
0
-40
100
2.5
LED Current (mA)
Typical Turn-Off Time
vs. Temperature
(IF=5mA, IL=70mADC)
On-Resistance (:)
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Turn-Off Time (ms)
Turn-On Time (ms)
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted) *
-20
0
20
40
60
80
100
Temperature (ºC)
0
-40
-20
0
20
40
60
80
100
Temperature (ºC)
Load Current (A)
Energy Rating Curve
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10Ps 100Ps 1ms 10ms 100ms
1s
10s 100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
PLA170
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
PLA170 / PLA170S
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
PLA170 / PLA170S
250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R04
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
PLA170
Mechanical Dimensions
PLA170
8.382 ± 0.381
(0.330 ± 0.015)
PCB Hole Pattern
7.239 TYP
(0.285 TYP)
2.54 ± 0.127
(0.100 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
Pin 1
7.620 ± 0.254
(0.300 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002)
0.254 ± 0.0127
(0.010 ± 0.0005)
6.350 ± 0.127
(0.250 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
4.064 TYP
(0.160 TYP)
Dimensions
mm
(inches)
0.457 ± 0.076
(0.018 ± 0.003)
PLA170S
8.382 ± 0.381
(0.330 ± 0.015)
9.524 ± 0.508
(0.375 ± 0.020)
Pin 1
0.635 ± 0.127
(0.025 ± 0.005)
PCB Land Pattern
2.54 ± 0.127
(0.100 ± 0.005)
2.54
(0.10)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
7.620 ± 0.254
(0.300 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
Dimensions
mm
(inches)
1.651 ± 0.254
(0.065 ± 0.010)
6
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
PLA170
PLA170STR Tape & Reel
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
K0 = 4.90
(0.19)
K1 = 3.80
(0.15)
P = 12.00
(0.472)
User Direction of Feed
Embossed
Carrier
Embossment
A0 = 10.10
(0.398)
Dimensions
mm
(inches)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
7
Specification: DS-PLA170-R04
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012