LED Driver Preliminary LF2200 Series AC to DC LED Power Supply ,W / Dimming 200 Watts Features : Universal Input Voltage 90~305Vac . Available Two Various Constant Current Output. Compatible with 1 ~ 10Vdc Dimming Controller . Waterproof Design Use for Dry, Damp,Wet Location,IP67 RoHS Compliant UL8750,cUL,FCC CE(EN55015,EN61347) Five Years Warranty Specifications : AC Input Range : 90~305Vac / 3A ~ 1.0A / 47~63Hz Input Inrush Current : <35A/115Vac,<70A/230Vac at cold start Leakage Current :<0.75mA / 230Vac ,Surge Immunity Test :6KVac PFC >0.92,THD <20% : Input 90Vac ~ 277Vac at 70% loading up THD <20%,PFC >0.93 : Input 90Vac ~ 230Vac at 50% loading up Efficiency : >90% at 70~100% load at 115Vac ~ 305Vac . Protection : OCP,SCP,OTP(Tc:82℃)-Recovery,OVP-Shut down Load Regulation (Constant Current ) : +/-5% DC Output Current Ripple/Noise : +/-10% Turn-on/off delay time < 1 sec. at 115Vac ~ 305Vac Operation Temp. : -40℃ ~ +50℃ , Tc : 80℃ Storage Temp. : -40℃ ~ +85℃,10~95%RH MTBF(@50℃) : >100,000 Hours,MIL-217F Warranty : 5 years ( Tc: < 80℃ ) Safety : UL8750(Class 1),CUL , FCC B CE ( EN55015 ,EN61547,EN61347,EN61000-3-2 class C ) Case Dimension : 236(L),74(W),40(H)mm Weight: 1300 Grams typ. Model Listing : Model LF2200-286286-FcSc LF2200-160160-FcSc LF2200-286160-FcSc Output Fc Sc Fc Sc Fc Sc Constant Current Mode / Forward Voltage Constant Current ( If ) Forward Voltage( Vf ) 300 ~ 550mA 100 ~ 286V 300 ~ 550mA 100 ~ 286V 620 ~ 1000mA 50 ~ 160V 620 ~ 1000mA 50 ~ 160V 300 ~ 550mA 100 ~ 286V 620 ~ 1000mA 50 ~ 160V Per Max. Output 100W 100W 100W 100W 100W 100W Max. Output 200W 200W 200W Model Information: LF2200-XXXYYY-FcSc-DC (Example:LF2200-286160-3562(Output1:143~286V / 350mA,Output2: 80 ~160V/620mA). 2200 = Two DC Output , 100Watt / Per Output ,Max. 200Watts . XXX = First Output Voltages ,YYY = Second Output Voltages. FcSc = First Output and Second Output Constant Current number. 62= 620mA / 80~160Vdc 45= 450mA / 111~222Vdc 30= 300mA / 143~286Vdc 80= 800mA / 62~125Vdc 65= 650mA / 77~154Vdc 85= 850mA / 59~118Vdc 48= 480mA / 104~208Vdc 32= 320mA / 143~286Vdc 68= 680mA / 73~147Vdc 90= 900mA / 55~111Vdc 50= 500mA / 100 ~200Vdc 35= 350mA / 143~286Vdc 70= 700mA / 71~143Vdc 95= 950mA / 52~105Vdc 52= 520mA / 100 ~192Vdc 38= 380mA / 132~263Vdc 72= 720mA / 70~138Vdc 100=1000mA /50~100Vdc 55= 550mA / 100~182Vdc 40= 400mA / 125~250Vdc 75= 750mA / 67~134Vdc 42= 420mA / 119~238Vdc DM = (Optional or Blank) D = dimming CTL.(1~10Vdc),M = C (constant current)step mode. DM Output wire Gray(Dim-),Purple(Dim+),Yellow(10Vdc/400mA),10Vdc Output can connect 50 set parallel PSU. Mechanical Drawing : www.magtechind.com, LF2200-SPEC-062411