LED Power Supply Product LP1240-XX-YZ-E Series Switch-Mode LED Driver Total Power 240 Watts Input Voltages 90-264 VAC Number of Outputs Single SPECIAL FEATURES Specifications ANZ#: Z157, August 6, 2009 ELECTRICAL SPECIFICATIONS • • • • • • Input range Single output 240W Frequency In compliance to EN61000-3-2, -3-3 Class D Power Factor Low Inrush Current maximize number of hookup Inrush current Incompliance to NEMA3, IP66 standards Input current Efficiency Suitable for damp or dry locations EMI filtering Suitable for wet location when use adequate Maximum power connectors Line Regulation • Aluminum extrusion enclosure with special Load Regulation designed junction box built-in Ripple Noise • OCP, OVP, OPP and SCP – shut down Leakage Current OTP – Auto-recovery Hold up time ENVIRONMENTAL Protection Operating temperature: -30 to 70 º C (De-rating : 2.5% per ºC from 50ºC~70ºC ) SAFETY Storage temperature: -40 to 85 º C Humidity (Non-Condensing): 5% to 95% UL/cUL Cooling: Convection CE Vibration Frequency: 5 to 50 Hz MTBF: >100,000 Hours at full load and 25ºC ambient conditions (MIL-217F) EMC : Compliant to 47CFR, Part 2, Part15 and Cispr PUB, 22 Class B 90 to 264 VAC, Full range 47 to 63 Hz > 0.95 at full load, 115VAC 5.0 Amps maximum at 115VAC, cold start, 25º C 3.0Amps maximum at 115VAC 85% typical at 230VAC and maximum load 47CFR, Part 2, Part 15 and Cispr PUB, 22 Class A 240W total 1% ±3% 3% typ. 2mA @ 110VAC, 4mA @ 230VAC Half cycle minimum at 120 VAC and 80% of rated load Over-voltage, Over-current, Over-temp. and Short circuit protection UL1012 Recognized Certified DC Output Model # Total Output (Watts) Output Current (A) Output Voltage (V) LP1240-12-YZ 0.2 ~ 20.0 12V, ± 3% 240 LP1240-24-YZ 0.1~ 10.0 24V, ± 3% 240 LP1240-48-YZ 0.1 ~ 5.0 48V, ± 3% 240 MECHANICAL DRAWING Model Information – Single DC output LP1240-XX-YZ XX – DC outputs Y – AC input connector (J – Junction Box) Z – DC output connector (G – Gland, T – Terminal Block or J – Junction Box) INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz157 MECHANICAL DRAWING ( PRELIMINARY ) LENGTH LENGTH 8.60 [218.5] 0.39 [10.0] (4X) 5.12 [130.0] 4.33 [110.0] CON AC IN DC OUT PIN COLOR --- BLACK --- WHITE --- GRN/YEL OUTPUT AWG LINE NEUTRAL 18 AC GND LENGTH 18 18 --- WHITE +V 14 --- BLACK GND 14 6.9 [175] ±0.8 [±20] 2.0 [51] STRIP 38 ± 18 12.0 [305] ±1 [±25] SLOT 0.79x0.20 [20x5] (4X) "AC INPUT 100-240VAC" LABEL ON PLATE 0.20 [5.0] 1 2 " NPT (THREADS: 3.5min & 5max) (3X) 2 CONDUCTOR FLEXIBLE CORD VW-1 OR FT-1 5.98 [152.0] 1.06 [26.9] 1.91 [48.6] 3.00 [76.2] CAPS (2X) Gland, Liquid Tight, AVC INDUSTRIAL CORP FGA21S-10 2.95 [75.0] 1.73 [43.9] 5.12 [130.0] 9.07 [230.5] INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz157