1/9 SPECIFICATIONS 1. Scope of Application These specifications are applied to the chip type LED lamp , model CL-L102-C3W 2. Part code CL-L102-C3W Series L102 : White power LED for general lighting. Watt Class C3 : 3 watt package. Lighting color W : White (CCT around 4100K) Approved Checked Drawn K.Fukasawa K.Funakubo T.Fuwa Jan.15.'08 Jan.15.'08 Jan.15.'08 Mark 2008.1.15 New implementation Date Description Appro. Symbol Name CL-L102-C3W Drawing No A96E-121-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P236 03/08 2/9 SPECIFICATIONS 3. Outline drawing Anode mark Anode Cathode Board Tc measuring-point(Board side) Unit : mm Tolerances unless otherwise specified : 0.3 4. Performance ( 1 ) Absolute Maximum Rating Parameter Symbol Power Dissipation Pd Forward Current IF Rating Value 6 500 Unit W mA Forward Pulse Current IFP 800 mA Reverse Voltage VR 15 V Operating Temperature TOP -20 ～ +85 ℃ Storage Temperature TST -30 ～ +100 ℃ *1 120 Junction Temperature Tj Max ℃ *2 *1Forward Current : Duty<=1/10 , Pulse Width<=10msec *2 D.C. Current : Tj = Tc + Rj-c * Pd Pulse Current : Tj = Tc + Rj-c * Pw(Power Dissipation / one-Pulse) * duty Approved Checked Drawn K.Fukasawa K.Funakubo T.Fuwa Jan.15.'08 Jan.15.'08 Jan.15.'08 Mark 2008.1.15 New implementation Date Description Appro. Symbol Name CL-L102-C3W Drawing No A96E-221-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P236 03/08 3/9 SPECIFICATIONS ( 2 ) Electro-optical Characteristics Parameter Symbol Condition IF=350mA VF Forward Voltage VR=15V IR Reverse Current Thermal resistance Rj-c Junction-case IF=350mA Luminous Flux Φv Min 9.0 170 Typ 10.4 6.0 210 Max 12.0 100 - Chromaticity coordinates ( Condition : IF=350mA ,Tc=25℃ ) Color Rank x y Color Rank 0.363 0.376 0.367 0.402 WR1 WR2 0.381 0.412 0.375 0.385 0.363 0.376 Color Rank x y Color Rank 0.359 0.352 0.363 0.376 WR3 WR4 0.375 0.385 0.370 0.360 0.359 0.352 0 0.44 ( Tc=25℃ ) Unit V μA ℃/W lm 0 x 0.375 0.381 0.404 0.395 0.375 x 0.370 0.375 0.395 0.386 0.37 y y 0.385 0.412 0.427 0.397 0.385 0.360 0.385 0.397 0.370 0.36 0 0 0.43 0.42 0.41 WR2 y 0.40 WR1 0.39 0.38 WR4 0.37 WR3 0.36 0.35 0.34 0.34 0.35 0.36 0.37 0.38 x 0.39 0.40 0.41 0.42 Note 1) The tolerance of measurement at our tester is VF±3% , φv±10% , Chromaticity(x,y)±0.01. Note 2) For handling ,please apply CMOS LSI or equivalent any electrostatic effect. Approved Checked Drawn T.Fuwa K.Fukasawa K.Funakubo Jan.15.'08 Jan.15.'08 Jan.15.'08 Mark 2008.1.15 New implementation Date Description Appro. Symbol Name CL-L102-C3W Drawing No A96E-321-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P236 03/08 4/9 SPECIFICATIONS 5. Characteristics 140% 12.0 120% 11.5 100% 11.0 80% VF[V] [a.u] ◆Forward Current vs. Relative Luminous Flux ◆Forward Current vs. Forward Voltage 60% 10.5 10.0 9.5 40% 9.0 20% 8.5 0% 0 100 200 300 400 500 8.0 100 600 200 300 IF[mA] 400 500 600 IF[mA] ◆Forward Current vs. Chromaticity Coordinate ◆Case Temperature vs. Chromaticity Coordinate 0.020 0.010 ⊿ｘ 0.015 ⊿ｘ 0.005 ⊿ｙ ⊿ｙ ⊿ｘ,⊿y ⊿ｘ,⊿y 0.010 0.005 0.000 -0.005 0.000 -0.005 -0.010 -0.010 -0.015 -0.015 -0.020 100 -0.020 200 300 400 500 600 0 20 Approved Checked Drawn K.Fukasawa K.Funakubo T.Fuwa Jan.15.'08 Jan.15.'08 Jan.15.'08 Mark New implementation Date Description Appro. 60 80 100 120 Tc [℃] IF[mA] 2008.1.15 40 Symbol Name CL-L102-C3W Drawing No A96E-421-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P236 03/08 5/9 SPECIFICATIONS ◆Case Temperature vs. Forward Voltage ◆Case Temperature vs. Relative Luminous Flux 12.0 120% 11.5 100% 80% 10.5 [a.u] VF[V] 11.0 10.0 9.5 60% 40% 9.0 20% 8.5 8.0 0% 0 20 40 60 80 100 120 0 20 40 Tc [℃] ◆Case Temperature vs. Allowable Forward Current 80 100 120 ◆Spectrum 600 110% 500 100% 90% 80% 400 [au.] AllowableForwardCurrent [mA] 60 Tc [℃] 300 300 70% 60% 50% 40% 200 30% 100 20% 10% 0% 84 0 -20 0 20 40 60 80 380 100 120 480 580 680 780 λd [nm] Tc[℃] Approved Checked Drawn K.Fukasawa K.Funakubo T.Fuwa Jan.15.'08 Jan.15.'08 Jan.15.'08 Mark 2008.1.15 New implementation Date Description Appro. Symbol Name CL-L102-C3W Drawing No A96E-521-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P236 03/08 6/9 SPECIFICATIONS 6. Reliability (1) Details of the tests Test Item Test Condition Ta=-20°C, IF=350 mA (Tj=20°C)× 1000 hours(with Al-fin) Ta=60°C, IF=350 mA (Tj=100°C)×1000 hours(with Al-fin) Continuous Operation Test Ta=80°C, IF=350 mA (Tj=120°C)×1000 hours(with Al-fin) Low Temperature Storage Test -30 °C × 1000 hours High Temperature Storage Test 100 °C × 1000 hours Moisture-proof Test 60 °C, 90 %RH for 1000 hours Thermal Shock Test -30°C × 30 minutes – 100°C × 30 minutes, 100- cycle (2) Judgment Criteria of Failure for Reliability Test (Tc=25°C) Measuring Item Symbol Measuring Condition Judgment Criteria for Failure Forward Voltage VF IF=350mA > U × 1.1 Total Luminous Flux fV IF=350mA < S × 0.7 U defines the upper limit of the specified characteristics. S defines the initial value. Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be returned to the normal ambient conditions after the completion of each test. Approved Checked Drawn K.Fukasawa K.Funakubo T.Fuwa Jan.15.'08 Jan.15.'08 Jan.15.'08 Mark 2008.1.15 New implementation Date Description Appro. Symbol Name CL-L102-C3W Drawing No A96E-621-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P236 03/08 7/9 SPECIFICATIONS 7. Packing Specifications (1) Primary packing An empty tray is placed on top of a four-tier tray which contain 50 pieces each. The set of five trays is banded together by wrapping two rubber bands around it and then sealed in a plastic bag. (Smallest packing unit: 200 pieces) An indication label which specifies product name, quantity, lot number and shipment date is attached to the outside of the plastic bag. Tray (Dimensions: 310 × 200 × 11mm / Materials: Electrically conductive PS) (2) Second packing A set of five trays is placed in a box of up to five sets. (Dimensions of box: 315mm×215mm×213mm, maximum of 1000 pieces per box) The same indication label used for the primary packing is attached to the box. If needed, a card board box is also used for shipment. < Packing figure > Product 50pcs/tray plastic bag indication label indication box Example of indication label CL-L102-C3W・・① ＊＊＊ ・・・ ② 73D001 ・・・ ③ 200 ・・・ ④ 1. TYPE e.g. CL-L102-C3W 2. P.No. (Cutomer's P/N) e.g. xxx 3. Lot No. e.g. 73D001 - First letter: Last digit of the year e.g. 7→year 2007 - Second letter: Production month e.g. 3→March Note: October, November and December are designated by X, Y and Z, respectively. - Third letter: CE's control number e.g. D001 4. Quantity e.g. 200 pieces Approved Checked Drawn K.Fukasawa K.Funakubo T.Fuwa Jan.15.'08 Jan.15.'08 Jan.15.'08 Mark 2008.1.15 New implementation Date Description Appro. Symbol Name CL-L102-C3W Drawing No A96E-721-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P236 03/08 8/9 SPECIFICATIONS Precautions 1. Avoid the application of any stress to the lens portion. 2. Avoid any contact by a sharp metal nail or other materials with the lens portion. Lens portion (Shaded area) 3. This product should be secured firmly by fastening an M3 screw on both sides of the product. Please be careful not to apply any stress to the product during the clamping operation. As the connection status could vary depending on materials of outer heat sink, please check thoroughly. Recommended torque:0.6~0.8Nm 4. A heat radiating grease should be applied to the whole rear surface so that this product can dissipate heat as a whole. This product could be bent during the clamping operation if heat grease in sheet form is used. For this reason, it is recommended that grease in paste form is used. 5. Handling of static electricity - Please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - As for damages due to static electricity, please check them by lighting inspection. CE's lighting inspection criterion Condition Judgmental criterion IF=1mA or less No-lighting should not exist. 6. Please be aware that this product should not come into contact with any other parts in assembled status. Approved Checked Drawn K.Fukasawa K.Funakubo T.Fuwa Jan.15.'08 Jan.15.'08 Jan.15.'08 Mark 2008.1.15 New implementation Date Description Appro. Symbol Name CL-L102-C3W Drawing No A96E-821-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P236 03/08 9/9 SPECIFICATIONS Precautions (continued) 7.Drive circuit - A constant current circuit is recommended as a drive circuit. And when two or more LED packages are connected, the series connection between each package is recommended. - Please design a circuit that prevents any reverse voltage (excess current) from being applied to this product instentaneously when the circuit is ON or OFF. 8. Heat generation - As this product is designed with consideration of the heat release property of module, a heat release design is required to use this product efficiently. Please ensure that heat generation is not in excess of the absolute maximum rating. (Refer to 4-1 Performance) - Factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. Thus, drive conditions should be taken into consideration, depending on ambient temperature (Ta). 9. Recommended soldering - Soldering operation should be performed within 3.5 seconds per land using a soldering iron of 40W or lower. The temperature of a soldering iron should be adjusted 350C or lower. - No external force is applied to sealing resin during soldering operation. - Please do not handle a product until it returns to a normal temperature. Note: This product is not adaptable to reflow process. 10. Other - This product complies with RoHs directives. - This product is intended for the application in general electronic devices (such as office automation equipment, communication devices, audio-video equipment, home electrical appliances, measurementhardware and others). In cases where this product is used for the applications that requires high reliability or could directly affect human life or health due to failure or malfunction (aerospace hardware, medical equipment, atomic control equipment and others), please consult with our sales representatives beforehand. - Our warranty does not cover situations where this product undergoes secondary fabrication such as changes in shape. -An agreement of formal product specifications is required prior to mass production. - The specifications and appearance of this product are subject to change without advanced notice. Approved Checked Drawn K.Fukasawa K.Funakubo T.Fuwa Jan.15.'08 Jan.15.'08 Jan.15.'08 Mark 2008.1.15 New implementation Date Description Appro. Symbol Name CL-L102-C3W Drawing No A96E-921-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P236 03/08