Datasheet

2010. 02. 05
Specification No.： LTP0002-A
Specifications sheet
Product name： Line Light Souce
Parts No.： L-CM011-C6N
Page NO.
drawing No.
page
1
2
3
4
5
6
7
8
Scope of Application, Part code
Outline drawing, Performance
Performance
Characteristics
Reliability
Packing Specifications
Precautions
Precautions
-
Applied Product Development Division
Checked
Drawn
Style No. UQP-0003-F23-0
Ref.CE-P658 03/10
SPECIFICATIONS
L-CM011-C6N
1/8
1. Scope of Application
These specifications are applied to the Lighting module, model L-CM series.
2. Part code
L - CM 011 - C6 N
Model name
L-CM011 : Lighting module
for general lighting
Watt Class
C6 : 6 watt module
Lighting color
N : White Color
△
△
△
MARK
QTY
DATE
DESCRIPTION
CITIZEN ELECTRONICS CO.,LTD.
ENGINEER
Form No.GQP-0013-F09-1
(UQP-U013-F03-0)
Ref.CE-P658 03/10
L-CM011-C6N
SPECIFICATIONS
2/8
3. Outline drawing
Unit ： mm
Tolerance unless otherwise specified ： ±0.3
4. Performance
( 1 ) Absolute Maximum Rating
Parameter
Symbol
Rating Value
Unit
Power Dissipation
Forward Current
Pd
IF
9.1
850
W
mA
Operating Temperature
TOP
-25 ~ +80
degC
Storage Temperature
TST
-30 ~ +90
degC
Junction Temperature *1
Tj Max
120
degC
*1 D.C. Current : Tj = Tc + Rj-c × Pd
*Tc:Temperature of specific terminal
*2 This module is not designed to be driven in reverse bias.
△
△
△
MARK
QTY
DATE
DESCRIPTION
CITIZEN ELECTRONICS CO.,LTD.
ENGINEER
Form No.GQP-0013-F09-1
(UQP-U013-F03-0)
Ref.CE-P658 03/10
L-CM011-C6N
SPECIFICATIONS
3/8
( 2 ) Electro-optical Characteristics
( Tc=25degC )
Parameter
Symbol
Condition
IF=700mA
VF
Forward Voltage
Junction-case
Thermal resistance Rj-c
IF=700mA
Luminous Flux
Φv
IF=700mA
Color Temperature CCT
General Color
IF=700mA
Ra
Rendering Index
MIN
TYP
MAX
8.4
415
-
9.6
2.0
605
5000
10.5
-
-
70
-
Unit
V
degC/W
lm
K
Chromaticity coordinates ( Condition : IF=700mA ,Tc=25degC )
Color Rank
y
0.373
0.322
0.341
0.402
0.373
0.41
0.40
0.39
0.38
0.37
y
N
x
0.331
0.331
0.357
0.367
0.331
0.36
0.35
0.34
0.33
0.32
0.31
0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39
x
Note 1) The tolerance of measurement at our tester is VF±3% , Φv±10% , Chromaticity(x,y)±0.01.
Note 2) For handling ,please apply CMOS LSI or equivalent any electrostatic effect.
0.4431 0.4213
0.4562 0.4260
0.4345 0.4033
0.4468
0.4077
△
△
△
MARK
QTY
DATE
DESCRIPTION
CITIZEN ELECTRONICS CO.,LTD.
ENGINEER
Form No.GQP-0013-F09-1
(UQP-U013-F03-0)
Ref.CE-P658 03/10
L-CM011-C6N
SPECIFICATIONS
4/8
5. Characteristics
5-1 If-Φv characteristics
(Tc=25degC)
5-2 If-Vf characteristics
100%
80%
60%
40%
20%
0%
0
200
400
600
800
If [mA]
5-3 If-Δxy characteristics
0
1000
(If=700mA)
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
Δxy
Δxy
400
600
800
1000
1000
(Tc=25degC)
Δy
(If=700mA)
40.0
60.0
Tc [℃]
80.0
5-6 Tc-Φv characteristics
120%
120%
100%
100%
80%
80%
100.0
(If=700mA)
Φv[a.u.]
Vf [a.u.]
800
Δx
20.0
If [mA］
5-5 Tc-Vf characteristics
400
600
If [mA]
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
Δy
200
200
5-4 Tc-Δxy characteristics
Δx
0
60%
60%
40%
40%
20%
20%
0%
0%
0
20
40
60
80
100
20
Tc [℃]
5-7 Tc-If characteristics
30
40
50
60
Tc[℃]
70
80
90
5-8 Spectrum
1000
Relative Emission
Intensity (a.u.)
120%
100%
800
If [mA]
(Tc=25degC)
120%
VF [a.u.]
Φv [a.u.]
140%
120%
100%
80%
60%
40%
20%
0%
80%
600
60%
400
40%
200
20%
0%
0
0
50
100
150
350
450
550
650
750
850
Wavelength (nm)
Tc [℃]
- Optical Characteristic were measured with an integrating sphere(40inch).
△
△
△
MARK
QTY
DATE
DESCRIPTION
CITIZEN ELECTRONICS CO.,LTD.
ENGINEER
Form No.GQP-0013-F09-1
(UQP-U013-F03-0)
Ref.CE-P658 03/10
L-CM011-C6N
SPECIFICATIONS
5/8
6. Reliability
(1)Details of the tests
Test Item
Test Condition
Life Test in Continuous Operation
Ta=25degC, If=700mA , 1000hours
High Temperature Storage Test
90degC , 1000hours
Low Temperature Storage Test
-30degC , 1000hours
Moisture-proof Test
60degC, 90 ±5%RH , 1000hours
Thermal Shock Test
-30degC×30 minutes - 90degC×30 minutes,
100cycle
(2)Judgment Criteria of Failure for Reliability Test
Measuring Item
Forward Voltage
Luminous Flux
Symbol
VF
Φv
Measuring Condition
IF=700mA
IF=700mA
(Ta=25degC)
Judgement Criteria for Failure
>U×1.2
<S×0.7
U defines the upper limit of the specified characteristics. S defines the initial value.
Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
returned to the normal ambient conditions after the completion of each test.
△
△
△
MARK
QTY
DATE
DESCRIPTION
CITIZEN ELECTRONICS CO.,LTD.
ENGINEER
Form No.GQP-0013-F09-1
(UQP-U013-F03-0)
Ref.CE-P658 03/10
SPECIFICATIONS
L-CM011-C6N
6/8
7. Packing Specifications
(1) Packing
An empty tray is placed on top of a ten-tier tray which contain 10 pieces each.
The set of eleven trays is sealed in a plastic bag and then attached to a cardboard box.
(smallest packing unit: 100 pieces)
An indication label which specifies product name, quantity, lot number is attached to
the outside of a plastic bag and a cardboard box.
Tray (Dimensions: 320 × 315 × 13.7 mm / Materials: Electrical conductive PS)
< Packing figure >
< Example of indication label >
CUSTOMER:
TYPE: L-CM011-C6N
P.NO:
Lot No: XXXXXX
Q'ty:
XXX pcs
PASS
CITIZEN ELECTRONICS
△
△
△
MARK
QTY
DATE
DESCRIPTION
CITIZEN ELECTRONICS CO.,LTD.
ENGINEER
Form No.GQP-0013-F09-1
(UQP-U013-F03-0)
Ref.CE-P658 03/10
SPECIFICATIONS
L-CM011-C6N
7/8
8. Precautions
(1) Operating and storage environment
- This product shall be used or stored under the environment where no condensation or
corrosive factors such as chlorine gas, sulfur gas, acid, alkali, salt and others are present.
- In cases where this product is cleaned, bonded, and molded, these effects on product quality
need to be checked using an intended equipment.
- This product shall be stored in the conditions that ambient temperature of 5～40degC and
relative humidity of 20～70% and used within three months after being delivered.
- In cases where more than three months go by, the connectivity needs to be checked before usage.
(2) Handling
- For safety, LED light source should not be looked at directly.
- No manual or reflow soldering are availavle.
- No ultrasonic cleaning is available.
- Any detergents or chemicals should not be used since they could trigger the discoloration or
degradation of this product and electrical shock.
- Please do not expose this product to excessive shock or vibration such as drop and others.
- Please avoid the application of any stress to the sealing resin area.
- Please avoid any contact by a sharp metal nail or other materials with the sealing resin area.
- This product shall not be bent or twisted forcedly.
Such handling could apply stress to soldering area and consequently induce no-lighting or
shorten the product life significantly.
- When handling this product, some static measurements such as the wearing of a wristband or
antistatic gloves are required to prevent any static electricity effect.
Any damages due to static should be checked by lighting inspection.
CE's lighting inspection criterion
Condition
Judgmental criterion
If=1mA or smaller per chip No-lighting should not exist.
(3) Rating
- A constant current circuit is recommended as a drive circuit.
- When two or more LED modules are connected in parallel in the constant voltage circuit,
the current-limiting resistance needs to be placed on each module so that they operate within
the rating.
- Please design a circuit that prevents any reverse voltage (excess current) from being applied to
this product instantaneously when the circuit is ON or OFF.
- This product shall be measured by a K thermocouple of φ0.1mm with small thermal capacity
under the conditions where this product is unaffected by radiant heat from other components
or wind caused by convection.Exessive heat may deteriorate the LED's characteristics and
reliability.
(4) Addition of fail safe fuction
- In cases where an LED or circuit shorts out for some reasons, this may result in electrical shock,
fumes and ignition.
- To help eliminate these possibilities, please ensure that an appropriate fail-safe function such as
a fuse is provided for your product.
△
△
△
MARK
QTY
DATE
DESCRIPTION
CITIZEN ELECTRONICS CO.,LTD.
ENGINEER
Form No.GQP-0013-F09-1
(UQP-U013-F03-0)
Ref.CE-P658 03/10
SPECIFICATIONS
L-CM011-C6N
8/8
(5) Assembly
- Thermal conductive silicone grease should be applied to the whole rear surface so that this
product can dissipate heat as a whole. However, the use of insulating paste is strongly
recommended in order to avoid short circuit.
Insufficient heat dissipation may reduce the life of this product significantly.
- Please be careful not to apply any stress to the product during the clamping operation.
As the connection status could vary depending on materials of outer heat sink, please check
thoroughly.
- Please be aware that this product should not come into contact with any other parts in
assembled.
- The aluminum-based PWB is used for this product. As the attachment to any materials that
have greatly different thermal expansion coefficient from that of this product could trigger
crack or drop because of thermal expansion or shrinkage, advance check is required.
- As for cleaning, please preliminarily confirm using an intended equipment if this product is free
from any reliability concerns.
The residues left after cleaning may cause not only the reduction in surface resistance but also
the corrosion of electrode parts and consequently lead to the deterioration of reliability.
- This product has connectors.
Use recommended wires suitable for the connectors at the time of assembly.
Use soldering lands on this product when needed.
/ Land size : 4 × 2 [mm]
/ Soldering operation should be performed within 3.5 seconds per land.
The temperature of a soldering iron should be adjusted 350degC or lower.
No external force is applied to sealing resin during soldering operation.
Please do not handle a product until it returns to a normal temperature.
Note: This product is not adaptable to reflow process.
(6) Others
- This product is intended for application in general electric devices (such as office automation
equipment, communication devices, audio-video equipment, home electrical appliances,
measurement hardware and others). In cases where this product is used for the following
applications that require high reliability or could derectly affect human life, health and
property due to failure or malfunction, please consult our sales representatives beforehand.
1. Aerospace hardware 2. Submarine equipment 3. Power plant control instrument
4. Medical equipment 5. Transport machine (automobile,train,vessel)
6. Traffic signal instrument 7. Security/disaster-prevention equipment
8. Information processing devices 9. Other devices equivalent to 1 through 8
- Our warranty does not cover situations where this product undergoes secondary fabrication
such as change in shape.
- This product complies with RoHS directives.
- The agreement of formal product specification is required prior to mass production.
- The specifications and appearance of this product are subject to change without advanced notice.
△
△
△
MARK
QTY
DATE
DESCRIPTION
CITIZEN ELECTRONICS CO.,LTD.
ENGINEER
Form No.GQP-0013-F09-1
(UQP-U013-F03-0)
Ref.CE-P658 03/10