POWR-GARD® Fuseblock Datasheet Accessories fuse pullers & POWR-JAW CLIP CLAMPS Features/Benefits • Ergonomically designed fuse pullers designed to safely remove power fuses GFP • Molded design offers more comfortable and natural grip than traditional pullers, increasing performance Specifications 097023 MFP TYPE OF Fuse PULLER part number Midget Fuse MFP 3 16 Pocket Fuse LPFP 250 V fuses from 0-200 A 600 V fuses from 0-100 A 9 16 ⁄ " - 119⁄32" fuses Giant Fuse GFP 250 V fuses from 61-600 A 600 V fuses from 61-400 A 11⁄16" - 219⁄32" fuses Tri-puller 097023 LPFP FUSE SIZE (DIAMETER) ⁄ " - 1⁄2" fuses For ATO and glass fuses Web Resources Sample requests and other technical information: www.littelfuse.com/fusepullers Ordering Information catalog number system number VOLTS LCC1 0LCC1 250 0-30 LCC2 0LCC2 250 35-60 LCC2 0LCC2 600 0-30 LCC4 0LCC4 600 35-60 LCC5 0LCC5 250 or 600 70-100 LCC6 0LCC6 250 or 600 110-200 LCC7 0LCC7 250 or 600 225-400 LCC8 0LCC8 250 or 600 450-600 AMPERES Note: POWR-JAW Clip Clamps are sold individually, not in pairs. A minimum of 1/8” of clearance between the fuseblock barrier and fuse clip is required to install Clip Clamps. Features/Benefits • Improve contact between fuse and clip • Help prevent unnecessary heat from poor contact due to the loss of spring force. This reduces: 1. Nuisance fuse opening 2. Premature aging of surrounding components Web Resources Sample requests and other technical information: www.littelfuse.com/clipclamps • High temperature phenolic resin knob for severe environments • Wide range of coverage with simple design www.littelfuse.com 1 © JUNE 2011 Littelfuse POWR-GARD Products