POLY-FUSE® Resettable PTCs Radial Leaded > 16R Series 16R Series RoHS Description ittelfuse 16R Series Radial Leaded PTCs are designed to L provide resettable overcurrent protection serving a wide range of electronics applications. With maximum 16 volts and maximum 100-ampere short circuit rating, they offer an ideal solution for USB protection. Features • 100A short circuit rating • 16V Operating voltages • Fast time–to–trip • Meets all USB protection requirements • RoHS compliant, Lead- Free and Halogen-Free* Agency Approvals AGENCY AGENCY FILE NUMBER Applications E183209 • Computers & peripherals • Any USB application • General Electronics R50119318 Electrical Characteristics Part Number I hold (A) I trip (A) V max (Vdc) I max (A) Pd typ. (W) 16R250G 2.5 4.7 16 100 16R300G 3.0 5.1 16 16R400G 4.0 6.8 16R500G 5.0 16R600G 6.0 Maximum Time To Trip Resistance Agency Approvals Current (A) Time (Sec.) R min (Ω) R 1max (Ω) 1.0 12.5 5.0 0.0220 0.0530 X X 100 2.3 15.0 1.0 0.0380 0.0975 X X 16 100 2.4 20.0 1.7 0.0210 0.0600 X X 8.5 16 100 2.6 25.0 2.0 0.0150 0.0340 X X 10.2 16 100 2.8 30.0 3.3 0.0100 0.0280 X X 16R700G 7.0 11.9 16 100 3.0 35.0 3.5 0.0077 0.0200 X X 16R800G 8.0 13.6 16 100 3.0 40.0 5.0 0.0056 0.0175 X X 16R900G 9.0 15.3 16 100 3.3 45.0 5.5 0.0047 0.0135 X X 16R1000G 10.0 17.0 16 100 3.6 50.0 6.0 0.0040 0.0102 X X 16R1100G 11.0 18.7 16 100 3.7 55.0 7.0 0.0037 0.0089 X X 16R1200G 12.0 20.4 16 100 4.2 60.0 7.5 0.0033 0.0086 X X 16R1400G 14.0 23.8 16 100 4.6 70.0 9.0 0.0026 0.0064 X X I hold = Hold current: maximum current device will pass without tripping in 20°C still air. R min = Minimum resistance of device in initial (un-soldered) state. I trip = Trip current: minimum current at which the device will trip in 20°C still air. R 1max = Maximum resistance of device at 20°C measured one hour after tripping. V max = Maximum voltage device can withstand without damage at rated current (Imax) Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) Pd = Power dissipated from device when in the tripped state at 20°C still air. * Effective January 1, 2010, all 16R PTC products will be manufactured Halogen Free (HF). Existing Non-Halogen Free 16R PTC products may continue to be sold, until supplies are depleted. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/22/15 POLY-FUSE® Resettable PTCs Radial Leaded > 16R Series Temperature Rerating Ambient Operation Temperature -40°C -20°C 0°C 20°C 40°C 50°C 60°C 70°C 85°C Hold Current (A) Part Number 16R250G 3.7 3.3 2.9 2.5 2.2 2.0 1.8 1.6 1.3 16R300G 4.4 4.0 3.5 3.0 2.6 2.4 2.1 1.9 1.6 16R400G 5.9 5.3 4.7 4.0 3.5 3.2 2.9 2.6 2.1 16R500G 7.4 6.6 5.9 5.0 4.4 4.0 3.6 3.2 2.6 16R600G 8.9 8.0 7.1 6.0 5.2 4.8 4.3 3.9 3.2 16R700G 10.4 9.3 8.2 7.0 6.1 5.6 5.0 4.5 3.7 16R800G 11.8 10.6 9.4 8.0 7.0 6.3 5.7 5.1 4.2 16R900G 13.3 12.0 10.6 9.0 7.8 7.1 6.5 5.8 4.7 16R1000G 14.8 13.3 11.8 10.0 8.7 7.9 7.1 6.4 5.3 16R1100G 16.3 14.6 12.9 11.0 9.6 8.7 7.9 7.0 5.8 16R1200G 17.7 15.9 14.1 12.0 10.5 9.5 8.6 7.7 6.3 16R1400G 20.7 18.6 16.5 14.0 12.2 11.1 10.0 9.0 7.4 Average Time Current Curves 2.5 A 3.0 A 4.0 A 5.0 A 6.0 A 7.0 A 8.0 A 9.0 A 10.0 A 11.0 A 12.0 A 14.0 A Temperature Rerating Curve 170% 150% Percentage of Rated Current Time in Hectoseconds (100 Seconds) 1 0.1 130% 110% 90% 70% 50% 30% 0.01 10% -40 -30 -20 0 10 20 30 40 Temperature (°C) 50 60 70 80 Note: Typical Temperature rerating curve, refer to table for derating data 0.001 0.0001 -10 1 10 100 1000 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/22/15 POLY-FUSE® Resettable PTCs Radial Leaded > 16R Series Soldering Parameters - Wave Soldering Max. ramping rate should not exceed 4°C/ Sec. Max. solder temperature should not exceed 260°C Soldering Zone Time within 5°C of actual Max. solder temperature within 3 – 5 seconds Soldering 260 Cooling 255 Temperature(°C) Pre-Heating Zone Refer to the condition recommended by the flux manufacturer. 125 100 Preheating Total time from 25°C room to Max. solder temperature within 5 minutes including Pre-Heating time Cooling by natural convection in air. Cooling Zone 25 60 - 180 Time(s) Max. ramping down rate should not exceed 6°C/Sec. Physical Specifications 2.5A: Tin-plated Copper clad Steel 5 max. Environmental Specifications 3.0 - 14.0A: Tin-plated Copper Operating/Storage Temperature -40°C to +85°C Soldering Characteristics Solderability per MIL–STD–202, Method 208 Maximum Device Surface Temperature in Tripped State 125°C Insulating Material Cured, flame retardant epoxy polymer meets UL94V-0 requirements. Passive Aging +85°C, 1000 hours -/+ 5% typical resistance change Device Labeling Marked with ‘LF’, voltage, current rating, and date code. Humidity Aging +85°C, 85% R.H., 1000 hours -/+ 5% typical resistance change Thermal Shock +85°C to -40°C 10 times -/+ 5% typical resistance change Solvent Resistance MIL–STD–202, Method 215 No change Moisture Resistance Level Level 1, J–STD–020 Lead Material © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/22/15 POLY-FUSE® Resettable PTCs Radial Leaded > 16R Series Dimensions Part Marking System A E Single Sided Marking E A Littelfuse Trademark B 16 Voltage Rating Current Rating Date Code (Contact Littelfuse for additional information) 250G XXXX B D D C C F Figure 1 F Figure 2 A B C D E F Physical Characteristics Part Number Figu re Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Max. Max. Max. Max. Typ. Typ. Min. Min. Max. Max. Typ. Typ. Inches mm 16R250G 2 0.35 8.90 0.50 12.80 0.20 5.1 0.13 3.18 0.12 3.00 0.035 0.9 0.020 0.51 Sn/ CuFe 16R300G 1 0.28 7.10 0.43 11.00 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu 16R400G 1 0.35 8.90 0.50 12.80 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu 16R500G 1 0.41 10.40 0.56 14.30 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu 16R600G 1 0.42 10.70 0.67 17.10 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu 16R700G 1 0.44 11.20 0.78 19.70 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu 16R700G KL 2 0.44 11.20 0.93 23.70 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu 16R800G 1 0.50 12.70 0.82 20.90 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu Lead (dia) Material 16R900G 1 0.55 14.00 0.85 21.70 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu 16R1000G 1 0.65 16.50 0.99 25.20 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu 16R1100G 1 0.69 17.50 1.02 26.00 0.20 5.1 0.30 7.6 0.12 3.00 0.047 1.2 0.032 0.81 Sn/Cu 16R1200G 1 0.69 17.50 1.10 28.00 0.40 10.2 0.30 7.6 0.14 3.50 0.055 1.4 0.039 1.00 Sn/Cu 16R1400G 1 0.93 23.50 1.10 27.90 0.40 10.2 0.30 7.6 0.14 3.50 0.055 1.4 0.039 1.00 Sn/Cu WARNING • Users shall independently assess the suitability of these devices for each of their applications • Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire • These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration • Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices • These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses • Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/22/15 POLY-FUSE® Resettable PTCs Radial Leaded > 16R Series Part Ordering Number System 16 R 700 G KL M R PACKAGING STYLE BLANK: Bulk R: Tape & Ammo SERIES QUANTITY CODE: F=200 H=100 M=1000 D=1500 P=2000 U=500 Kinked Lead Device Option Identifier (16R700GKL product only) TYPE: G (16VDC) I HOLD CURRENT CODE (SEE TABLE BELOW) R: RADIAL VOLTAGE RATING (VDC) Packaging Options Part Number 16R250G 16R300G 16R400G 16R500G 16R600G Ordering Number 16R250GU 16R250GPR 16R300GU 16R300GPR 16R400GU 16R400GPR 16R500GU 16R500GPR 16R600GU 16R600GDR I hold (A) I hold Code 2.50 250 3.00 300 4.00 400 5.00 500 6.00 600 7.00 700 16R700GF 16R700G 16R700GKLF 16R700GMR 16R700GKLMR 16R800G 16R900G 16R1000G 16R1100G 16R1200G 16R1400G 16R800GF 16R800GMR 16R900GF 16R900GMR 16R1000GF 16R1000GMR 16R1100GF 16R1100GMR 16R1200GH 16R1200GMR 16R1400GH © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/22/15 8.00 800 9.00 900 10.00 1000 11.00 1100 12.00 1200 14.00 1400 Packaging Option Quantity Quantity & Packaging Codes Bulk 500 U Tape and Ammo 2000 PR Bulk 500 U Tape and Ammo 2000 PR Bulk 500 U Tape and Ammo 2000 PR Bulk 500 U Tape and Ammo 2000 PR Bulk 500 U Tape and Ammo 1500 DR Bulk 200 F Tape and Ammo 1000 MR Bulk 200 F Tape and Ammo 1000 MR Bulk 200 F Tape and Ammo 1000 MR Bulk 200 F Tape and Ammo 1000 MR Bulk 200 F Tape and Ammo 1000 MR Bulk 100 H Tape and Ammo 1000 MR Bulk 100 H POLY-FUSE® Resettable PTCs Radial Leaded > 16R Series Tape and Ammo Specifications Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details. Dimension EIA Mark Dimensions IEC Mark Dim. (mm) Tol. (mm) Carrier tape width W W 18 -0.5 /+1.0 Hold down tape width: W4 W0 11 min. Top distance between tape edges W6 W2 3 max. Sprocket hole position W5 W1 9 -0.5 /+0.75 Sprocket hole diameter* D0 D0 4 -0.32 /+0.2 Abscissa to plane(straight lead) H H 18.5 -/+ 3.0 Abscissa to plane(kinked lead) H0 H0 16 -/+ 0.5 Abscissa to top 45.0 max. Overall width w/o lead protrusion 56 max. Overall width w/ lead protrusion 57 max. Lead protrusion L1 l1 1.0 max. Protrusion of cut out L L 11 max. Protrusion beyond hold-down tape l2 l2 Not specified Sprocket hole pitch P0 P0 25.4 Device pitch: -/+ 0.5 25.4 Pitch tolerance Tape thickness t Tape thickness with splice t1 20 consecutive. -/+ 1 0.9 max. t Splice sprocket hole alignment 2.0 max. 0 -/+ 0.3 Body lateral deviation Δh Δh 0 -/+ 1.0 Body tape plane deviation Δp Δp 0 -/+ 1.3 Ordinate to adjacent component lead* P1 P1 3.81 -/+ 0.7 7.62 -/+ 0.7 Ordinate to adjacent component lead* Lead spacing:16R250G-16R1100G F F 5.08 -/+ 0.8 Lead spacing:16R1200G-16R1400G F F 10.18 -/+ 0.8 *Differs from EIA specification Tape and Ammo Diagram ∆h ∆h Figure 1 ∆h ∆p Reference plane A1 H1 F A L B H0 W4 W5 W H1 C 1 H C2 I2 L1 P0 D0 Direction of unreeling Cross section A - B t © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/22/15