Radial Lead Fuses TE5® > Time-Lag > 392 Series 392 Series, TE5® Time-Lag Fuse RoHS Pb Description TE5®, time-Lag type, 250V rated, designed in accordance to IEC 60127-3. Features • • • • • •Lead-free • Reduced PCB space requirements • Direct solderable or plug-in versions Applications Agency Approvals Agency Internationally approved Low internal resistance Shock safe casing Vibration resistant Halogen free Agency File Number Ampere Range 126983 800mA - 6.3A 1410866 1026673 800mA - 4A 5A - 6.3A E67006 280mA - 6.3A JET1896-31007-2002 1A - 5A CQC07012021162 800mA - 6.3A SU05024-7013 SU05024-7014 SU05024-7015 SU05024-7016 SU05024-7017 SU05024-7018 • Battery Charges • Power supplies • Consumer Electronics • Industrial Controllers Additional Information Datasheet Samples Resources Electrical Characteristics for Series 800mA - 6.3A % of Ampere Rating Opening Time 150% 1 Hour, Min. 210% 120 s, Max. 275% 400 ms Min. ; 10 Sec. Max. 400% 150 ms Min. ; 3 Sec. Max. 1000% 20 ms Min. ; 150 ms Max. Electrical Characteristic Specifications by Item Agency Approvals Rated Current Amp Code Voltage Rating Breaking Capacity Voltage Drop 1.0×IN max. (mV) Power Dissipation 1.5×IN max. (mW) Melting Integral 10×IN min. (A2s) 280 mA 0280 250V 35A/250 VAC 115 168 800 mA 0800 250V 25A/250 VAC 110 280 3.80 x x x 1.00 A 1100 250V 25A/250 VAC 115 400 5.80 x x x 51.00 x x x x x x 1.25 A 1125 250V 25A/250 VAC 100 500 9.75 x x x x x x 1.60 A 1160 250V 25A/250 VAC 95 600 13.50 x x x x x x 2.00 A 1200 250V 25A/250 VAC 90 700 21.00 x x x x x x 2.50 A 1250 250V 25A/250 VAC 85 750 32.00 x x x x x x x 3.15 A 1315 250V 32A/250 VAC 80 1100 55.00 x x x x x 4.00 A 1400 250V 40A/250 VAC 75 1200 100.00 x x x x x x 5.00 A 1500 250V 50A/250 VAC 70 1000 90.00 x x x x x x 6.30 A 1630 250V 63A/250 VAC 65 1200 126.00 x x x x x Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/06/15 Radial Lead Fuses TE5® > Time-Lag > 392 Series 140 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A Average Time Current Curves 0.280A Temperature Re-rating Curve 100000 PERCENT OF RATING 120 100 10000 80 60 1000 40 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) 100 10 1 0.1 0.01 0.001 0.20 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 Time (Seconds) Cooling Time Preheat Time Dwell Time © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/06/15 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Radial Lead Fuses TE5® > Time-Lag > 392 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3 sec. (Wave) 350ºC, ≤ 3 sec. (Soldering iron) Soldering Heat Resistance 260ºC, 10 sec. (IEC 60068-2-20) 350ºC, ≤ 3 sec. (Soldering iron) Operating Temperature Climatic Category Stock Condition Dimensions Vibration Resistance –40ºC to +85ºC (consider de-rating) –40ºC to +85ºC/21 days (EN 60068-1, -2-1, -2-2, -2-78) +10 ºC to +60 ºC Relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% 24 cycles at 15 min. each (EN 60068-2-6) 10–60 Hz at 0.75 mm amplitude 60–2000 Hz at 10 g acceleration Part Numbering System max. 4 8.5 0.6 5.08 1 +0.1 0.5 min L max. 8 392 xxxx 0000 Series 1.5 Amp Code Refer to Amp Code column of Electrical Characteristics Table Packaging Code 0000 Tape/Ammopack (1,400 pcs.) 0440 Short Leads - Bulk (1,400 pcs.) Holes in the printed circuit board Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width Tape & Ammopack Short Leads N/A N/A 1,400 1,400 0000 0440 N/A N/A © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/06/15