Radial Lead Fuses TE5® > Medium Time-Lag Fuse > 398 Series 398 Series, TE5® Modul Protector® Fuse RoHS Pb Description The 398 Series TE5® Fuses are short circuit protectors, medium Time-Lag type, and 65V rated. Features Agency Approvals Agency • Reduced PCB space requirements • Flame resistant encapsulated casing • Highly defined cut-off times • Available from 0.125A to 4A • Low internal resistance • Halogen free, Lead-free and RoHS compliant Applications Agency File Number Ampere Range E67006 0.125A - 4A • Microprocessor protection Electrical Characteristics Additional Information Datasheet Resources % of Ampere Rating Opening Time 300 10 Seconds, Max. Samples Electrical Characteristics Amp Code Rated Current Marking Code* Voltage Rating 0125 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 125mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A MP13 MP25 MP32 MP40 MP50 MP63 MP80 MP100 MP125 MP160 MP200 MP250 MP315 MP400 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V 65V Breaking Capacity Nominal Cold Resistance (Ohms) Cold Resistance 0.1×IN typ. (mΩ) Power Disspation 1.0×IN max. (mW) Melting Integral 10×IN max. (A2s) Agency Approvals 50A@65 VAC/DC 0.9610 0.3540 0.2600 0.1860 0.1540 0.1150 0.0850 0.0640 0.0480 0.0340 0.0260 0.0210 0.0155 0.0120 900 355 261 186 155 115 85 65 48 34 26 21 16 12 50 50 60 75 90 120 140 170 210 320 425 550 650 1000 0.036 0.063 0.08 0.18 0.33 0.48 1.02 1.10 2.34 4.66 8.40 14.81 29.27 41.12 x x x x x x x x x x x x x x * Physical Marking on top of the device Notes: 1) 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 2) Resistance is measured at 10% of rated current, 25ºC. © 2016 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 01/06/16 Radial Lead Fuses TE5® > Medium Time-Lag Fuse > 398 Series 140 100000 120 PERCENT OF RATING 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A Average Time Current Curves 0.125A Temperature Re-rating Curve 100 10000 80 60 40 1000 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 100 10 1 0.100 0.010 0.001 0.20 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Lead-Free Recommendation Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Time (Seconds) Cooling Time Preheat Time Dwell Time © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/06/16 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Radial Lead Fuses TE5® > Medium Time-Lag Fuse > 398 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10N (EN 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) Operating Temperature -40ºC to +85ºC (Consider re-rating) Climatic Category -40ºC to +85ºC/21 days (IEC 60068-1,-2-1,-2-2,-78) Stock Conditions +10ºC to +60ºC RH, ≤ 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance 24 cycles at 15 min. each (IEC 60068-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Part Numbering System Dimensions max. 4 Dimensions (mm) 398 xxxx 0000 0.6 5.08 1 +0.1 0.5 min 18.8 max. 8 8.5 Series 1.5 Amp Code Refer to Amp Code column of Electrical Characteristics Table Packaging Code 0000 Tape/Ammopack (1,400 pcs.) Holes in the printed circuit board Packaging Packaging Option 398 Series Tape & Ammopack Packaging Specification Quantity Quantity & Packaging Code Reel Size N/A 1,400 0000 N/A © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/06/16