Radial Lead Fuses TE5® > Fast Acting > 391 Series 391 Series, TE5® Fast-Acting Fuse Description The 391 Series are TE5® short circuit protector, fast-acting type, 65V rated fuses. For Short Circuit Protection of Sensitive Electronic Components and Assemblies. Features • For worldwide applications • Low internal resistance • Flame resistant encapsulated casing • Reduced PCB space requirements • RoHS compliant and Lead-free • Highly defined cut-off times Agency Approvals Agency Agency File Number Ampere Range E67006 125mA - 4A Electrical Characteristics % of Ampere Rating Opening Time 300 2 Seconds, Max. • Available from 125mA to 4A. • Irreversible physical separation Applications • Battery chargers • Power supplies • Consumer Electronics • Industrial controllers Additional Information Datasheet Samples Resources Electrical Characteristics Power Disspation 1.0×IN max. (mW) 65 V 3400 190 0.005 x Amp Code Marking Code* Voltage Rating 0125 125 mA SP13 Breaking Capacity Melting Integral 10×IN max. (A2s) Agency Approvals Cold Resistance 0.1×IN max. (mΩ) Rated Current 0160 160 mA SP16 65 V 2450 210 0.0095 x 0200 200 mA SP20 65 V 1750 240 0.019 x 0250 250 mA SP25 65 V 195 52 0.012 x 0315 315 mA SP32 65 V 155 65 0.018 x 0400 400 mA SP40 65 V 120 85 0.034 x 0500 500 mA SP50 65 V 95 105 0.057 x 0630 630 mA SP63 65 V 75 135 0.095 x 0800 800 mA SP80 65 V 58 170 0.16 x 1100 1.00 A SP100 65 V 46 220 0.27 x 1125 1.25 A SP125 65 V 37 270 0.45 x 50A / 65 VAC/DC 50-60 Hz cosϕ=1.0 1160 1.60 A SP160 65 V 29 350 0.77 x 1200 2.00 A SP200 65 V 23 440 0.85 x 1250 2.50 A SP250 65 V 18 550 2.2 x 1315 3.15 A SP315 65 V 14 700 3.7 x 1400 4.00 A SP400 65 V 12 900 6.5 x * Physical Marking on top of the device © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13 Radial Lead Fuses TE5® > Fast Acting > 391 Series 140 100000 120 PERCENT OF RATING 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A Average Time Current Curves 0.125A 0.160A 0.200A Temperature Rerating Curve 100 10000 80 60 1000 23°C 40 TIME IN SECONDS 20 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE (°C) 100 10 1 0.100 0.010 0.001 0.20 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Time (Seconds) Cooling Time Preheat Time Dwell Time © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Radial Lead Fuses TE5® > Fast Acting > 391 Series Product Characteristics Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V-0 Round Pins: Copper, Tin-plated Materials Lead Pull Strength 10 N (EN 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) Dimensions Operating Temperature -40ºC to +85ºC (consider de-rating) Climatic Category -40ºC to +85ºC/21 days (EN 60068-1,-2-1,-2-2,-78) Stock Conditions +10 ºC to +60 ºC RH, ≤ 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Part Numbering System max. 4 391 xxxx 0000 Series Amp Code 0.6 5.08 1 +0.1 0.5 min 18.8 max. 8 8.5 Dimensions (mm) Refer to Amp Code column of Electrical Characteristics Table 1.5 Packaging Code 0000 Tape/Ammopack (1,400 pcs.) Holes in the printed circuit board Packaging Packaging Option 391 Series Tape & Ammopack Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A 1,400 0000 N/A © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13