WIDEBAND ISOLATION TRANSFORMERS R3600 SERIES • For RF, DS3/E3, Boradband, BPL and Ethernet Magnetics which require Supplementary or Reinforced Isolation • Construction complies with IEC60950 Isolation requirements • Operating Temperature: 0°C to +70°C (extended temperature range available upon request) • RoHS Compliant Product • Custom Design Available ELECTRICAL PARAMETERS @25°C Part Number R3600- Turns Ratio (Pri : Sec) (±5%) Inductance (1-4) (µH Min) DCR (1-4) (Ω MAX) Insertion Loss Insertion Loss Insertion Loss (dB Max) (dB Max) (dB Typ) (1 MHz) (100 MHz) (300 MHz) Hi-Pot (Pri to Sec) (Vrms) Schematic 1 1:1 500 .30 -0.5 -1.0 -2.6 4500 B 2 1CT:1CT 800 .50 -0.5 3 1:2 120 .20 -0.8 -1.2 -3.5 3000 A -1.0 -1.5 4500 B 4 1:1:1 120 .20 -0.8 -1.0 -1.5 4500 C 5 3:3:1 200 .30 -0.5 -1.0 -3.0 3000 C 6 1:1.224 500 .50 -0.8 -1.0 -3.0 3000 B NOTES: • OCL measured @ 100KHz, 0.1Vrms at Pin 1-4 (with 2-3 shorted) • Insertion Loss measured with 100Ω as Input (Primary) Impedance between 1-4 and Output (Secondary) load with respective impedance • 50Ω and 75Ω impedance data available upon request DIMENSIONS SCHEMATIC A Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 B C Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]