Test Report : SMA01L‐12 1W DC‐DC Unregulated Single Output Converter DESIGN VERIFY TEST Output Function Test Input Function Test SAFETY TEST Safety Test RELIABILITY TEST Environment Test SMA01series DESIGN VERIFY TEST OUTPUT FUNCTION TEST NO 1 TEST ITEM VOLTAGE ACCURACY SPECICATION -2%~+2% (Max) TEST CONDITION Ta:25℃ RIPPLE & NOISE 100mVp-p (Max) Ta:25℃ LINE REGULATION -12%~+12% (Max) LOAD REGULATION P 34mV P -11.27% ~ +10.48% P -3.31% ~ +2.39% P I/P:4.5VDC~5.5VDC O/P:FULL LOAD Ta:25℃ 4 -0.47% I/P:5VDC O/P:FULL LOAD 3 VERDICT I/P:5VDC O/P:100% LOAD 2 RESULT -8.0%~+8.0% (Max) I/P:5VDC O/P:MIN~FULL LOAD Ta:25℃ INPUT FUNCTION TEST NO 1 TEST ITEM EFFICIENCY SPECICATION 78% (Typ) TEST CONDITION DC CURRENT VERDICT I/P:5VDC O/P:FULL LOAD Ta:25℃ 2 RESULT 265 mA / FULL LOAD (Max) I/P:5VDC 32 mA / NO LOAD (Max) O/P:NO / FULL LOAD Ta:25℃ 79.31% P 253 mA / FULL LOAD 26 mA / NO LOAD P SAFETY TEST SAFETY TEST NO 1 2 TEST ITEM WITHSTAND VOLTAGE ISOLATION RESISTANCE SPECICATION I/P-O/P:1500 VDC/min I/P-O/P:500VDC>100MΩ TEST CONDITION RESULT I/P-O/P:1500 VDC/min Ta:25℃ I/P-O/P: 0.02mA I/P-O/P:500 VDC Ta:25℃ I/P-O/P>100MΩ NO DAMAGE NO DAMAGE VERDICT P P Model: SMA01L-12 Test Report 2 / 3 SMA01series RELIABILITY TEST ENVIRONMENT TEST NO 1 TEST ITEM TEMPERATURE RISE TEST SPECICATION TEST CONDITION RESULT VERDICT 1. ROOM AMBIENT BURN-IN:6HRS I/P:5VDC O/P:FULL LOAD Ta=25℃ 2. HIGH AMBIENT BURN-IN:16HRS I/P:5VDC 2 LOW TEMPERATURE TURN ON O/P:FULL LOAD Ta=85℃ Position P/N 1 2 1 CASE CENTER 45.0℃ 102.6℃ TURN ON AFTER 3 HOURS TEST I/P:5VDC O/P: 100﹪LOAD Ta= -40℃ DATE SAMPLE 2009.9.5 PRODUCT SAMPLE TEST RESULT PASS P NO TEST:OK P TESTER APPROVAL PETER VINCENT ZENG Model: SMA01L-12 Test Report 3 / 3