HLG-320H 320W Single Output Switching Power Supply series ■ Features : Universal AC input / Full range (up to 305VAC) Built-in active PFC function High efficiency up to 95% Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Type HL LED Driver for use in Class Ⅰ, Division 2 hazardous location luminaires Three in one dimming function (1~10Vdc or PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet location 7 years warranty (Note.10) F HLG-320H-12 A 110 M M SELV Bauar t gepruft Sicherheit egel ma ge od o s be wac g IP65 IP67 www. tuv.com ID 2000000000 Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or PWM signal or resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal potentiometer. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL DC VOLTAGE HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36 HLG-320H-42 HLG-320H-48 HLG-320H-54 12V 15V 20V 24V 30V 36V 42V 48V 54V 7.5 ~ 15V 10 ~ 20V 12 ~ 24V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V 8.9A 7.65A 6.7A 5.95A CONSTANT CURRENT REGION Note.4 6 ~12V RATED CURRENT 22A 19A 15A 13.34A 15 ~ 30V 10.7A RATED POWER 264W 285W 300W 320.16W 321W 320.4W 321.3W 321.6W 321.3W 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p 17 ~ 22V 21 ~ 26V 26 ~ 32V 32 ~ 39V 38 ~ 45V 43 ~ 52V 49 ~ 58V RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V OUTPUT Can be adjusted by internal potentiometer A type and C type only CURRENT ADJ. RANGE 9.5 ~ 19A 7.5 ~ 15A VOLTAGE TOLERANCE Note.3 ± 3.0% ± 2.0% ± 1.5% 6.67 ~ 13.34A 5.35 ~ 10.7A 4.45 ~ 8.9A ± 1.0% ± 1.0% ± 1.0% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 1.0% ± 0.5% ± 0.5% 11 ~ 22A LINE REGULATION LOAD REGULATION SETUP, RISE TIME ± 1.5% ± 2.0% Note.8 2500ms,80ms/115VAC HOLD UP TIME (Typ.) VOLTAGE RANGE 15ms at full load Note.5 90 ~ 305VAC 3.8 ~ 7.65A 3.35 ~ 6.7A 2.97 ~ 5.95A ± 1.0% ± 1.0% ± 1.0% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% 500ms,80ms/230VAC at full load 230VAC /115VAC 127 ~ 431VDC 47 ~ 63Hz FREQUENCY RANGE POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading ≧ 50% at 115VAC/230VAC input and output loading ≧ 75% at 277VAC input INPUT 94.5% 94.5% 3.5A / 115VAC 1.65A / 230VAC 1.45A / 277VAC COLD START 70A(twidth=1010μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT OVER CURRENT Note.4 SHORT CIRCUIT 92.5% 94% 94% 93% 94.5% 95% 95% 95% 95% 95% 95% 95% 53.5 ~ 60V 59 ~ 65V 1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed 33 ~ 37V 14 ~ 17V 17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V Shut down and latch off o/p voltage, re-power on to recover WORKING TEMP. -40 ~ +70℃ (Refer to "Derating Curve") VIBRATION SAFETY STANDARDS Note.7 40 ~ 46V 46.5 ~ 53V Protection type : Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT EMC 91.5% <0.75mA / 277VAC OVER VOLTAGE SAFETY & 94% 91% EFFICIENCY (Typ.) (277Vac) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) PROTECTION 93.5% EFFICIENCY (Typ.) (230Vac) 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ± 0.03%/℃ (0 ~ 50℃ ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(type”HL”), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 (except for HLG-320H C type), J61347-1, J61347-2-13 (except for HLG-320H C type) approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (≧50% load) ; EN61000-3-3 EMC EMISSION I/P-FG:2KVAC O/P-FG:1.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria B 157.1K hrs min. MIL-HDBK-217F (25℃) 252*90*43.8mm (L*W*H) DIMENSION 1.88Kg; 8pcs/16Kg/0.92CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. EMC IMMUNITY MTBF OTHERS NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. A type and C type only. 7. Safety and EMC design refer to EN60598-1, subject CNS15233, GB7000.1, FCC part18. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 10. Refer to warranty statement. 11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. File Name:HLG-320H-SPEC 2015-08-19 HLG-320H 320W Single Output Switching Power Supply Mechanical Specification Case No.202A series Unit:mm Blank:(HLG-320H) 252 225.2 17 13.4 8.9 300±20 40 ψ4.5×4PL 90 112.6 T case SJTW 18AWG×3C 300±20 17 45 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJTW 14AWG×2C +V(Red) -V(Black) 43.8 ※ T case: Max. Case Temperature. ※IP67 rated. Cable for I/O connection. A Type:(HLG-320H-_A) 252 225.2 17 13.4 8.9 300±20 40 90 ψ4.5×4PL T case 45 SJTW 18AWG×3C 17 112.6 Io Vo ADJ. ADJ. 300±20 SJTW 14AWG×2C +V(Red) -V(Black) ※ T case: Max. Case Temperature. 43.8 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) ※ IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) File Name:HLG-320H-SPEC 2015-08-19 HLG-320H 320W Single Output Switching Power Supply series B Type:(HLG-320H-_B) 252 225.2 13.4 8.9 17 ψ4.5×4PL 40 90 300±20 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 300±20 112.6 T case SJTW 18AWG×3C 17 45 SJTW 18AWG×2C SJTW 14AWG×2C DIM+(Blue) DIM-(White) +V(Red) -V(Black) 43.8 ※ T case: Max. Case Temperature. C Type:(HLG-320H-_C) 252 225.2 4.5 17 13.4 8.9 65 1 112.6 T case 3 Io Vo ADJ. ADJ. ψ4.5×4PL 4.5 ψ4.5×4PL 7.5 237 ※ T case: Max. Case Temperature. 43.8 17 O/P 2 45 9.25 40 2 90 11 1 I/P ※ Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) AC Input Terminal Pin No. Assignment Pin No. 1 2 3 Assignment FG AC/L AC/N DC Output Terminal Pin No. Assignment Pin No. 1 2 Assignment +V -V File Name:HLG-320H-SPEC 2015-08-19 HLG-320H 320W Single Output Switching Power Supply series D Type(option):(HLG-320H-_D) 252 225.2 17 13.4 8.9 300±20 40 ψ4.5×4PL 112.6 T case 90 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJTW 18AWG×3C 17 45 300±20 +V(Red) -V(Black) SJTW 14AWG×2C 43.8 ※ T case: Max. Case Temperature. ※ IP67 rated. Timer dimming function, contact MEAN WELL for details. Block Diagram Fosc : 65KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM(B Type) O.L.P. FG O.L.P. DETECTION CIRCUIT PWM & PFC CONTROL PFC CONTROL O.V.P. Derating Curve Static Characteristics 230VAC 100 100 90 80 80 70 110VAC LOAD (%) LOAD (%) 60 40 20 -40 -25 -10 0 15 30 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 60 50 40 90 100 125 135 145 155 165 175 180 200 230 305 INPUT VOLTAGE (V) 60Hz File Name:HLG-320H-SPEC 2015-08-19 320W Single Output Switching Power Supply HLG-320H series Power Factor Characteristic PF Constant Current Mode 1 0.98 0.96 0.94 0.92 0.9 0.88 0.86 0.84 277VAC 230VAC 115VAC 50% 60% 70% 80% 90% 100% (320W) LOAD EFFICIENCY vs LOAD (48V Model) HLG-320H series possess superior working efficiency that up to 95% can be reached in field applications. 97 95 EFFICIENCY (%) 93 91 89 87 277VAC 85 230VAC 83 115VAC 81 79 77 75 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Vo(%) 100 (B) Constant Current area (A) Constant Voltage area Should there be any compatibility issues, please contact MEAN WELL. 50 (min.) (C) Hiccup Protection 50 100 Io (%) Typical LED power supply I-V curve File Name:HLG-320H-SPEC 2015-08-19 HLG-320H 320W Single Output Switching Power Supply series DIMMING OPERATION (for B-type only) FG (Green/Yellow) AC/L(Brown) AC/N(Blue) DIM+(Blue) DIM-(White) HLG-320H +V(Red) -V(Black) ※ Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. ※ Please DO NOT connect "DIM-" to "-V". ※ Reference resistance value for output current adjustment (Typical) Single driver 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ Resistance Multiple drivers value (N=driver quantity for synchronized 10KΩ/N 20KΩ/N 30KΩ/N 40KΩ/N 50KΩ/N 60KΩ/N 70KΩ/N 80KΩ/N 90KΩ/N 100KΩ/N dimming operation) Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN ----95%~108% ※ 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※ 10V PWM signal for output current adjustment (Typical): Frequency range :100HZ ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. ※Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. Dimming connection diagram for turning the lighting fixture ON/OFF : N FG L Switch Relay Adjuster 10K~100K Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L HLG-320H B Type AC/N DIM+ DIMV(-) V(+) Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-320H-SPEC 2015-08-19 HLG-320H 320W Single Output Switching Power Supply series WATERPROOF CONNECTION ◎ Waterproof connector Waterproof connector can be assembled on the output cable of HLG-320H to operate in dry/wet/damp or outdoor environment. AC source HLG-320H I/P O/P Size Pin Configuration (Female) M12 Order No. Suitable Current 4-PIN 5A/PIN M12-04 10A max. Size Pin Configuration (Female) M15 5-PIN 5A/PIN M12-05 10A max. 2-PIN 12A/PIN M15-02 12A max. Order No. Suitable Current LED Lamp ◎ Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 ψ25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-320H O/P Wires ※CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. ◎ Junction Box(Option ) 10 5 76 8.5 SJTW 18AWG×3C +V(Red) -V(Black) 32 90 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 61 8.5 6 225.2 387.2 SJTW 14AWG×2C 2-ψ5 3- PF 1/2" 3- PF 1/2" 150±20 35 43.8 150±20 ※Optional junction box available for A / Blank - type , please contact MEAW WELL for details. 86 File Name:HLG-320H-SPEC 2015-08-19