NFM-05 5W Output Switching Power Supply series ■ ‧ ‧ ‧ ‧ ‧Ⅱ ‧ ‧ ‧ ‧ ‧ ‧ ‧ SPECIFICATION MODEL OUTPUT INPUT NFM-05-3.3 NFM-05-5 DC VOLTAGE 3.3V 5V NFM-05-12 NFM-05-15 NFM-05-24 12V 15V 24V RATED CURRENT 1.25A CURRENT RANGE 0 ~ 1.25A 1A 0.42A 0.33A 0.23A 0 ~ 1A 0 ~ 0.42A 0 ~ 0.33A RATED POWER 4.125W 0 ~ 0.23A 5W 5.04W 4.95W 5.52W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 150mVp-p 150mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 20ms/230VAC HOLD UP TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz 74% 76% 3 ~ 3.63V EFFICIENCY (Typ.) 67% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.12A/115VAC LEAKAGE CURRENT 1000ms, 20ms/115VAC at full load 24ms/115VAC at full load 120 ~ 370VDC 71% 73% 0.08A/230VAC COLD START 25A/115VAC 45A/230VAC Note.6 Touch current < 80μ A/264VAC OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE Note.5 WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.8 ~ 16.2V 3.8 ~ 4.95V 5.75 ~ 6.75V Protection type : Shut off o/p voltage, clamping by zener diode Tj 145℃ typically (U1) detect on main control IC 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1,TUV EN60601-1, IEC60601-1 approved SAFETY & ISOLATION LEVEL WITHSTAND VOLTAGE EMC Primary-Secondary: 2xMOPP I/P-O/P:4KVAC (Note 4) ISOLATION RESISTANCE EMC EMISSION I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A DIMENSION 58*45*19.1mm (L*W*H) 0.03Kg; 120pcs/4.6Kg/0.97CUFT OTHERS PACKING NOTE 738.7Khrs min. MIL-HDBK-217F (25℃) ℃ File Name:NFM-05-SPEC 2014-12-09 NFM-05 5W Output Switching Power Supply Mechanical Specification series Unit:inch(mm) -V 0.789"(20.04mm) +V 0.491" (12.47mm) DC OUTPUT AC/N 0.689"(17.5mm) 1.77"(45mm) AC INPUT T2A/250V 1.85"(47mm) 2.28"(57.9mm) 0.75"(19.1mm) 0.196"(5mm) AC/L 0.21" (5.33mm) 0.07"(1.8mm) 0.177"(4.5mm) 0.041"(1.05mm) 0.138"(3.5mm) Block Diagram fosc : 67KHz RECTIFIERS & FILTER EMI FILTER I/P RECTIFIERS & FILTER POWER SWITCHING PWM CONTROL Derating Curve +V -V DETECTION CIRCUIT Output Derating VS Input Voltage 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 60 50 40 85 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:NFM-05-SPEC 2014-12-09