Product Announcement Introducing MSP430F2132 as Bare Die Product from Texas Instruments 16-bit Ultra-Low-Power Microcontroller, 8kB Flash, 512B RAM, 10 bit ADC, 1 USCI The TheTLC2201 Texas Instruments is a precision, MSP430 low-noise family operational of ultra-low-power amplifier microcontrollers using Texas Instruments consists Advanced of severalLinCMOS devices featuring process. This different device sets combines of peripherals the noise targeted performance for various of the applications.JFET amplifiers with the DC precision available previously only in lowest-noise bipolar a The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wakeup from low-power modes to active mode in less than 1 μs. The MSP430F2132 is an ultra-low-power microcontroller with two built-in 16-bit timers, a fast 10-bit A/D converter with integrated reference and a data transfer controller (DTC), a comparator, built-in communication capability using the universal serial communication interface, and up to 24 I/O pins. Designing applications with the MSP430F2132 in bare die form offers >50% X-Y-Z size reduction when compared with smallest available package. ∴ Bare die form factor greatly assists size sensitive applications. Quick Reference Data SOP Frequency (MHz) 16 Flash 8 KB RAM 512 B GPIO 24 ADC 10-Bit SAR Interface CHIP ON BOARD 1 USCI_A (UART/LIN/IrDA/SPI) 1 USCI_B (I2C/SPI) End equipment Optimised Smoke Detectors, Battery Chargers, Timers 1 16-bit (3CCR), 1 16-bit (2CCR0, 1 watchdog/Interval FLIP CHIP Wireless Sensors Please contact us for the MSP430 die geometry. Features • • • Low Supply-Voltage Range, 1.8 V to 3.6 V Ultra-Low Power Consumption: o Active Mode: 250 µA at 1 MHz, 2.2 V o Standby Mode: 0.7 µA o Off Mode (RAM Retention): 0.1 µA Ultra-Fast Wake-Up From Standby Mode in • • • • 16-Bit Timer0_A3 With Three Capture/Compare Registers 16-Bit Timer1_A2 With Two Capture/Compare Registers On-Chip Comparator for Analog Signal Compare Function or Slope Analog-to-Digital (A/D) Conversion • Less Than 1 µs • 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time 10-Bit 200-ksps A/D Converter With Internal Reference, Sample-and-Hold, Autoscan, and Data Transfer Controller Smallest form factor • Universal Serial Communication Interface A full electrical datasheet is available from http://focus.ti.com/docs/prod/folders/print/msp430f2132.html For further die technical information and choice of available supply formats please contact us Micross Components EU Micross Components USA MIcross Components Asia Unit D2 Meadowbank Oldham, Lancashire OL9 8EH England 22 Just Road Fairfield, NJ 07004-3413 USA 299299 Kaiyuan Road Jiangning, Nanjing China 211100 Tel: +44 (0)161 683 5236 Fax: +44 (0)161 684 1233 Tel: (973) 227 8007 Fax: (973) 227 4766 Tel: +86-25-6667 8880 www.micross.com July 2010