XTRM Series Distributed by XTR75011-D HIGH-TEMPERATURE LOW-POWER SERIES VOLTAGE REGULATOR FEATURES DESCRIPTION Up to 10 possible output voltages from same part: o 1.2V / 1.8V / 2.5V / 3.3V / 5V / 5.5V / 9V / 10V / 12V / 15V. Input voltage from 2.8V to 40V. Drop-in replacement of commercial voltage references. Trimming capabilities. Operational beyond the -60°C to +230°C temperature range. Output current up to 50mA @ 230°C. Soft-start. Compatible with low and high dropout voltages. Stable over a wide range of load capacitance (0.1µF to 10µF). Low intrinsic current consumption (380µA @ 230°C). Low temperature dependence (-40ppm/°C). Excellent line regulation (-80ppm/V). Active-low shutdown control. Monolithic design for high-reliability. Latch-up free SOI process. Ruggedized SMT and thru-hole packages. Also available as bare die. XTR75010 is a family of low-power voltage regulators/references designed for extreme reliability and high temperature applications. Being able to operate with input voltages from 2.8V to 40V, XTR75010 parts can supply up to 50mA at +230°C while providing excellent regulation characteristics. Parts from this product family operate as a 3-terminal series regulator/reference with a temperature coefficient (TC) as low as -40ppm/°C. Up to ten possible output voltages (1.2V to 15V) can be obtained from the same part. Functionality features include shut-down mode and soft-start. XTR75010 parts can be used in a wide range of applications such as positive and negative regulators/references, adjustable power supply, current sources, as well as precision bridge excitation. Especial design techniques were used allowing XTR75010 parts to offer a precise, robust and reliable operation in critical applications. Full functionality is guaranteed from -60°C to +230°C, though operation well below and above this temperature range is achieved. XTR75010 parts have been designed to reduce system cost and ease adoption by reducing the learning curve and providing smart and easy to use features. Parts from the XTR75010 family are available in ruggedized SMT and thru-hole packages. Parts are also available as bare dies. APPLICATIONS Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. Positive and negative precision regulators/references, A/D and D/A converters, current sources, bridge excitation. PRODUCT HIGHLIGHT 1.8V Voltage Regulator/Reference 12V Voltage Regulator with Trimming Negative Voltage Regulator (-5V) +V Rlim TRIM VIN /SHDN /SHDN Cin Cout XTR75011 Vout=+12V VOUT TRIM RA VIN R1 /SHDN Cout RB Cin XTR75011 5V VIN GND Vout=+1.8V GND /SHDN VOUT 12V /SHDN XTR75011 1.8V VIN GND VIN VOUT TRIM XTR431 R2 Cout R3 -VIN Ω ∙ Ω ∙ XTR2N0625 (PMOS) VOUT=-5V Ω∙ Ω ORDERING INFORMATION X Source: X = X-REL Semi TR Process: TR = HiTemp, HiRel 75 Part family Product Reference Temperature Range Package XTR75010-BD -60°C to +230°C Bare die XTR75011-S -60°C to +230°C Ceramic SOIC XTR75011-D -60°C to +230°C Ceramic side braze DIP XTR75012x-D -60°C to +230°C Ceramic side braze DIP XTR75012x-FE -60°C to +230°C Flatpack with exposed pad XTR75014-D -60°C to +230°C Ceramic side braze DIP XTR75014-FE -60°C to +230°C Flatpack with exposed pad XTR75015-D -60°C to +230°C Ceramic side braze DIP XTR75015-FE -60°C to +230°C Flatpack with exposed pad Other packages and packaging configurations possible upon request. 01x Part number A = 1.2V B = 1.8V C = 2.5V x Output voltage (XTR75012 only) D = 3.3V G = 9.0V H = 10V E = 5.0V F = 5.5V i = 12V J = 15V Pin Count 16 16 8 8 8 8 8 8 Marking XTR75010 XTR75011 XTR75011 XTR75012x XTR75012x XTR75014 XTR75014 XTR75015 XTR75015 For Full Specification Please Contact: [email protected] DS-00034-11 rev4A 2013-02-19 © 2013 X-REL Semiconductor 1 of 13 PROPRIETARY INFORMATION Tel: +44 (0)1603 788967 Web: www.micross.com www.x-relsemi.com