MOSPEC SR12 thru SR16 Surface Mount Schottky Barrier rectifiers SCHOTTKY BARRIER RECTIFIERS Using the Schottky Barrier principle with a Molybdenum barrier meta. These state-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes, in surface mount applications where compact size and weight are critical to the system. 1.0 AMPERES 20-60 VOLTS Features *Low Forward Voltage. *Low Switching noise. *High Current Capacity *Guarantee Reverse Avalanche. *Guard-Ring for Stress Protection. *Low Power Loss & High efficiency. *150℃ Operating Junction Temperature *Low Stored Charge Majority Carrier Conduction. *Plastic Material used Carries Underwriters Laboratory Flammability Classification 94V-O *Moisture Sensitivity Level: MSL-1 DO-214AA(SMB) *In compliance with EU RoHs 2002/95/EC directives MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Symbol SR12 SR13 SR14 SR15 SR16 Unit VRRM VRWM VR 20 30 40 50 60 V VR(RMS) 14 21 28 35 42 V 1.0 A 25 A TJ , TSTG -65 to +150 ℃ Characteristic Symbol SR12 SR13 SR14 SR15 SR16 Unit Maximum Instantaneous Forward Voltage ( IF =1.0 Amp ) VF Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃ ) ( Rated DC Voltage, TC = 125℃ ) IR 0.5 10 Maximum Thermal Resistance Junction to Case RθJC 60 Typical Junction Capacitance ( Reverse Voltage of 4 volts & f=1 MHz ) CP Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Operating and Storage Junction Temperature Range IO IFSM ELECTRIAL CHARACTERISTICS 0.55 90 0.70 V mA o 80 C/W PF DIM A B C D E F G H MILLIMETERS MIN MAX 3.30 3.90 4.20 4.60 1.80 2.20 5.10 5.60 1.90 2.50 1.30 0.22 0.95 1.35 CASE--Transfer molded plastic OLARITY--Cathode indicated polarity band SR12 Thru SR16 NSTANTANEOUS FORWARD CURRENT (Amp.) FIG-2 TYPICAL FORWARD CHARACTERISITICS SR12-SR14 SR15-SR16 CASE TEMPERATURE (℃) FORWARD VOLTAGE (Volts) FIG-3 TYPICAL REVERSE CHARACTERISTICS FIG-4 TYPICAL JUNCTION CAPACITANCE Tj=125 o o Tj=75 c o Tj=25 c PERCENT OF RATED REVERSE VOLTAGE (﹪) PEAK FORWARD SURGE CURRENT (Amp.) FIG-5 PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 Hz JUNCTION CAPACITANCE (PF) INSTANTANEOUS REVERSE CURRENT (mA.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 FORWARD CURRENT DERATING CURVE SR12-SR14 SR15-SR16 REVERSE VOLTAGE (Volts)