MOSPEC RS401 THRU RS407 SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Ampere FEATURES *Low cost *High forward surge current capability *Ideal for printed circuit board *High temperature soldering guaranteed: 260oc/10 second at 5 lbs. (2.3kg) tension MECHANICAL DATA *Case: Transfer molded plastic *Epoxy: UL94V-O rate flame retardant *Terminals:Lead Solderable Per MIL-STD-202E method 208C *Polarity:As Marking on Body *Mounting Position: Any *Weight:0.22 ounce, 6.21 gram MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS * Rating at 25℃ ambient temperature unless otherwise specified * Single phase, half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 % Characteristic Symbol RS401 RS402 Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage RS403 RS404 RS405 RS406 RS407 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO(AV) 4.0 3.0 A Non-Repetitive Peak Surge Current 8.3 ms Single half sine-wave superimposed on rated load ( JEDEC Method) IFSM 150 A Forward Voltage (per element) ( IF =4.0 Amp) VFM 1.0 V IR 10 Average Forward Rectified Output Current , at TC=50℃(Note 2) TA=50℃(Note 3) Maximum DC reverse current at rated TA = 25℃ DC blocking voltage per element T = 100℃ uA 1.0 mA Rating for Fusing( t<8.3 ms) 2 It 93 A2s Typical Junction Capacitance per element (Note1) CJ 55 pF Rθ jA 20 k/W TJ , Tstg -65 to +150 ℃ A Typical Thermal Resistance (note 3) Operating and Storage Temperature Range Note: 1 Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Unit mounted on 3.0”×3.0”×0.11” thick (7.5×7.5×0.3 cm) AL, plate. 3. P.C. board mount with 0.5”×0.5”(12×12mm) copper pad. 0.375”(9.5 mm)lead length. RS401 thru RS407 FIG-2 TYPICAL FORWARD CHARACTERISITICS NSTANTANEOUS FORWARD CURRENT (Amp.) 60 Hz Resistive or Inducttive Load Mounting on 3.0”×3.0”×0.11” (7.5×7.5×0.3 cm TC AL Plate Ambient TA Temperature P.C.B Mounting 0.47”×0.47” (12×12 mm) Copper Pads 0.375”(9.5mm) Lead Length O TJ=25 C Pulse Width=300us 1% Duty Cycle CASE TEMPERATURE (℃) FORWARD VOLTAGE (Volts) FIG-3 PEAK FORWARD SURGE CURRENT FIG-4 TYPICAL JUNCTION CAPACITANCE 8.3 ms Single Half Sine Wave O (JEDEC Method) TJ=25 C O TJ=25 C f=1Mhz Vstg=50m Vp-p JUNCTION CAPACITANCE (PF) IIFSM, PEAK FWD SURGE CURRENT (A) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 FORWARD CURRENT DERATING CURVE NUMBER OF CYCLES AT 60 Hz REVERSE VOLTAGE (Volts) IR, INSTANTANEOUS REVERSE CURRENT (uA) FIG-5 TYPICAL REVERSE CHARACTERISTICS O TJ=100 C O TJ=25 C PERCENT OF RATED REVERSE VOLTAGE (﹪)