KBU6005 THRU KBU610 SINGLE PHASE SILICON BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Ampere FEATURES ● ● ● ● KBU Ideal for printed circuit board Surge overload rating: 200A peak High case dielectric strength High temperature soldering guaranteed: 260°C/10 seconds at 5lbs. (2.3kg) tension .15 X23L (3.8 X5.7L) HOLE THRU .157(4.0)*45° .935(23.7) .895(22.7) 300 (7.5) .700(17.8) .600(16.8) MECHANICAL DATA .780(19.8) .740(18.8) 1.00 MIN. (25.4) Case: UL-94 Class V-0 recognized Flame Retardant Epoxy ● Terminals : Plated leads solderable per MIL-STD 202, method 208 ● Mounting Position: Any ● Marking: Type Number ● .052(1.3)DIA. .048(1.2)TYP. .087(2.2) .071(1.8) .220(5.6) .180(4.6) .276(7.0) .256(6.5) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Symbol KBU 6005 KBU 601 KBU 602 KBU 604 KBU 606 KBU 608 KBU 610 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V @TC = 100°C IO 6.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200 A Forward Voltage (per element) @IF = 3.0A VFM 1.0 V Peak Reverse Current At Rated DC Blocking Voltage @TC = 25°C @TC = 100°C IR 10 1.0 µA mA I2t 166 A2s 4.2 K/W -65 to +150 °C Rating for Fusing (t < 8.3ms) (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range R JC Tj, TSTG Note: 1. Non-repetitive for t > 1ms and < 8.3ms. 2. Thermal resistance junction to case per element mounted on PC board with 13.0x13.0x0.03mm thick land areas. KBU6005 THRU KBU610 RATINGS AND CHARACTERISTIC CURVES FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 6 Tj=25 0C 8.3ms Single Half Sine Wave AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 200 175 150 125 100 75 50 25 1 2 20 10 5 50 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE 4 2 0 100 MOUNTED ON 4X4 INCH COPPER PC BOARD 0.5"(12.7mm) LEAD LENGTH 0 50 o NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 40 INSTANTANEOUS REVERSE CURRENT. ( A) INSTANTANEOUS FORWARD CURRENT. (A) 150 100 ELEMENT TEMPERATURE. ( C) 20 10 4 1 0.4 10 1 0 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0.2 0.1 Tj=100 0C 0.6 0.7 0.8 0.9 1.0 1.1 Tj=25 0C 1.2 INSTANTANEOUS FORWARD VOLTAGE. (V) 1.3 0.1 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 140