GBL4005 THRU GBL410 GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 4.0 Ampere FEATURES GBL Glass passivated chip junction ● Reliable low cost construction utilizing molded plastic technique ● Ideal for printed circuit board ● Low reverse leakage current ● Low forward voltage drop ● High surge current capabiliy ● Chamfer ● ● ● .44(11.2) .42(10.7) .106(2.7) .091(2.3) MECHANICAL DATA ● .142(3.6) .133(3.4) .81(20.6) .77(19.6) .125(3.17) *45° .56(14.2) .50(12.7) .055(1.4) .047(1.2) Case:Molded plastic, GBL Terminals : Terminals: Leads solderable per MIL-STD-202 method 208 guaranteed .210 .190 (5.3) (4.8) Epoxy: UL 94V-0 rate flame retardant Mounting Position: Any .210 .190 (5.3) (4.8) .210 .190 (5.3) (4.8) .043(1.1) .035(0.9) .020(0.51) .045(1.14) .015(0.38) .035(0.90) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Symbol GBL 4005 GBL 401 GBL 402 GBL 404 GBL 406 GBL 408 GBL 410 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 4.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150 A Forward Voltage per leg VFM 1.1 V IR 5.0 500 µA Peak Reverse Current At Rated DC Blocking Voltage @TC = 50°C @IF = 2.0A @TA = 25°C @TA = 125°C Typical Thermal Resistance per leg (Note 1) R JA 22 °C/W Typical Thermal Resistance per leg (Note 2) R JL 3.5 °C/W -55 to +150 °C Operating and Storage Temperature Range Tj, TSTG Note: 1. Mounted on 75 x 75 x 3.0mm Al. plate. 2. Mounted on PCB at 9.5mm lead length with 12mm 2 copper pad. GBL4005 THRU GBL410 RATINGS AND CHARACTERISTIC CURVES 20 IF, INSTANTANEOUS FWD CURRENT (A) IO, AVERAGE OUTPUT CURRENT (A) 5 4 3 2 1 Single Phase Half Wave 60 Hz Resistive or Inductive Load 0 20 40 60 80 100 120 140 1.0 0.1 0.01 0 TC, CASE TEMPERATURE (ºC) 200 150 100 50 8.3ms Single Half Sine-Wave JEDEC Method 10 NUMBER OF CYCLES AT 60 Hz IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FORWARD SURGE CURRENT (A) 250 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element Fig. 1 Forward Current Derating Curve 0 Tj = 25ºC Pulse Width = 300 µs 2% Duty Cycle 10 100 Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 10 TC = 100°C 1.0 0.1 TA = 25°C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics, per element