Datamate Connectors Male Crimp Calculation Single row A Latches (when fitted) add 0.5mm to overall length ‘A’ B B + 5.60 Latches (when fitted) add 0.5mm to overall length ‘A’ (Total no. of contacts - 1) x 2 2.00 A B + 5.60 B Total no. of contacts - 2 2.00 9.00 max B Calculation Double row 9.00 max 4.10 max A tools B 2.00 A 6.10 max Wire Stripping Details Recommended Crimp Tool – M22520/2-01 Positioner – T5747 Contact Insertion/Removal Tool – Z80-280 See pages 87 to 89 Ø1.10 max 2.00 nominal Instruction sheets available at www.harwin.com/downloads/instructions HOW TO ORDER M80 - XXX XX XX Series code type Single Double 806 810 Small Bore, Unlatched Finish 807 811 Large Bore, Unlatched 05 808 812 Small Bore, Locking Latch 809 813 Large Bore, Locking Latch total No. of contacts 883 816 Small Bore, Friction Latch 02, 03, 04, 05, 06, 07 Single Row 884 817 Large Bore, Friction Latch 04, 06, 08, 10, 12 Double Row All dimensions in mm. www.harwin.com 33 Gold Datamate L-TEK Mates with female connectors shown on pages 21 to 24. Contacts are rear insertable. Part numbers are for housings and the equivalent number of contacts. Back potting & cable assembly service available, contact [email protected]. Spare contacts available, see page 34.