Datamate Connectors Female Crimp Extended Wall DATAMATE J-TEK Extended Wall Datamate allows back potting to be performed. Polarised mouldings. Crimp contacts are rear insertable. Large bore 22AWG, small bore 24 – 28 AWG. Part numbers are for a housing and the equivalent number of contacts. Mates with male connectors shown on pages 52, 54, 56, 58, 60, 63 and 64. Spare contacts are available – see page 51. WITHOUT JACKSCREWS WITH JACKSCREWS Calculation C B 2.00 2.00 C B A B + 12 B Total no. of contacts - 2 C B+7 2.00 2.00 M2 No.1 contact No.1 contact 7.55 A Wall A 3.00 A/F 6.65 max 6.65 max tools Wire Stripping Details Recommended Crimp Tool – M22520/2-01 Positioner – T5747 Contact Insertion/Removal Tool – Z80-280 See pages 87 to 89 Ø1.10 max 2.00 nominal Instruction sheets available at www.harwin.com/downloads/instructions HOW TO ORDER M80 - XXX XX XX A Series code BLANK Wall = 5mm A Wall = 1mm Finish type 465 Large Bore, with Jackscrews* 476 Small Bore, without Jackscrews 466 Small Bore, with Jackscrews* 485 Large Bore, with Hex Jackscrews 475 Large Bore, without Jackscrews 486 Small Bore, with Hex Jackscrews *Slotted All dimensions in mm. www.harwin.com WALL SIZE 48 05 Gold 42 Gold + Tin total No. of contacts 06, 10, 12, 14, 18, 20, 26, 34, 42, 50