Archer Connectors – M50 Specification Materials Environmental Mouldings:High Temperature Plastic UL94V-0 Operating temperature: -40°C to +105°C Contacts: Copper Alloy Solderability: 245°C for 5 seconds typical Finish: See individual pages Soldering heat resistance: 260°C for 5 seconds Electrical Mechanical Current rating: 1A per contact Voltage proof: 300V AC, 500V DC for 1 minute (see individual drawings) Contact resistance: 30 mΩ max Insulation resistance: 500 MΩ min Durability:M50-310, 312: 100 operations M50-311: 600 operations M50-315: 25 operations Others: 300 operations Insertion force (max):Jumper Sockets: 10.0N Others: 2.0N per contact All preferred sizes of this range are held in stock. Check www.harwin.com for availability. Vibration sensitivity:10 – 55Hz, 1.5mm, 6 hours duration Shock severity: 294m/s2 (30G) for 11ms Mating Profiles FEMALE MALE VERTICAL PC TAIL VERTICAL PC TAIL HORIZONTAL PC TAIL VERTICAL SMT DIL DIL DIL DIL DIL M50-300 M50-320 M50-310 M50-311 M50-312 M50 -315 6.23 5.40 3.20 4.60 M50-350 M50-350 M50-350 HM1346: M50-350 -350 M50-315 / M50-350 MATING H HM1343: M50-312 / M50-350 MATINGM50 HIEGHT M50-300 M50-320 M50-310 M50-311 M50-312 HORIZONTAL PC TAIL 7.56 9.37 11.70 7.40 9.47 M50-390 M50-390 M50-300 M50-320 HM1338: M50-320 / M50-390M50-310 MATING HIEGHT M50-311 M50-390 7.00 6.08 M50-360 6.18 HM1339: M50-320 / M50-360 MATING HIEGHT M50-360 M50-390 All dimensions in mm. www.harwin.com Low Profile 5.50 HM1337: M50-320 / M50-350 MATING HIEGHT VERTICAL SMT VERTICAL SMT 1.27mm (.050") Pitch Withdrawal force (min):Jumper Sockets: 1.3N Others: 0.1N per contact 103 M50 -315 7.20 8.60 M50-390 M50 -390HM1347: M50-315 / M50-390 M50-312 M50 -315 HM1344: M50-312 / M50-390 MATING HIEGHT 5.30 HM1345: M50-312 / M50-360 MATING M50-360 M50HIEGHT -360 3.90 Archer Connectors – M50 A Female PC Tail 1.27 A range of 1.27mm pitch female connectors, for vertical and horizontal board-to-board applications. 1.27 B Suitable for use with male connectors on pages 108 to 109. Horizontal connector has two point solder fixing for connector rigidity. 3.05 4.30 2.40 0.40 Vertical 0.15 1.27 A 1.27mm (.050") Pitch 1.27 Ø0.70 3.10 1.27 B 4.30 Recommended PC Board Pattern 2.40 1.27 0.50 B 0.15 1.27 Calculation horizontal A B + 1.77 B 1.27 x (No. of contacts per row - 1) B Ø0.70 4.80 A 5.08 3.45 2.40 1.27 1.09 0.43 1.27 B 0.15 1.27 5.08 Recommended PC Board Pattern HOW TO ORDER M50 - 3 X 0 XX 45 Series code finish 45 type 0 Vertical No. OF CONTACTS PER ROW 2 Horizontal 03 to 50 M50-300 02 to 50 M50-320 All dimensions in mm. www.harwin.com 104 Gold Archer Connectors – M50 Female Vertical Surface Mount Locating pegs (posts) available to ensure correct positioning on the board. Suitable for use with male connectors on pages 108 to 109. Alternative height connectors available on page 106. A B A B + 1.62 B 1.27 x (No. of contacts per row - 1) B A 1.27 2.15 3.10 5.80 1.27 1.60 4.60 0.15 B 1.27 1.27 2.20 Calculation with post A Ø0.80 1.27 1.60 0.50 B 3.00 RecommendedDPC Board Pattern 4.80 0.42 0.50 0.65 1.27 3.00 A B + 1.67 B Ø1.20x (No. of contacts per row - 1) 1.27 C B + 3.04 D B + 4.43 4.80 C C B Ø0.85 D Ø1.25 2.20 5.40 Ø0.80 1.27 4.80 Ø1.20 C 5.60 4.50 0.76 2.05 Recommended PC Board Pattern HOW TO ORDER Ø0.85code Series M50 - 31 X XX XX C B FINISH Ø1.25 TYPE 5.60 0 Without Posts 1 With Posts 1.27 0.76 No.2.05 OF CONTACTS PER ROW 03 to 50 M50-310 05 to 12, 15, 20, 25, 30, 35, 40, 45, 50 M50-311 All dimensions in mm. www.harwin.com 105 4.50 5.40 42 Gold + Tin (M50-311) 45 Gold (M50-310) 1.27mm (.050") Pitch Calculation without post Archer Connectors – M50 Female Vertical Surface Mount, Low Profile Suitable for use with male connectors on pages 108 to 109. Locating pegs (posts) available to ensure correct positioning on the board. Dual entry connector can be used as either top or bottom entry. Calculation 3.6mm high without Posts A 1.27mm (.050") Pitch B A B + 1.73 B 1.27 x (No. of contacts per row - 1) B A 0.90 3.40 2.10 5.70 2.20 3.10 1.27 C 3.60 0.15 0.65 1.27 0.42 4.65 1.27 Recommended PC Board Pattern 4.50 2.2mm high with Posts, dual entry A Ø0.55 0.45 B Calculation 1.27 3.40 0.90 Ø0.55 B + 1.67 B 1.27 x (No. of contacts per row - 1) C B – 1.27 B 2.20 C A 4.65 0.71 2.20 1.27 Ø0.71 1.27 1.27 5.50 Ø0.70 0.45 B C 1.27 Recommended PC Board Pattern HOW TO ORDER M50 - 31 X XX XX B 0.71 2.20 1.27 Series code Ø0.71 FINISH 1.27 5.50 TYPE 2 3.6mm high without posts 5 2.2mm high with Cposts, dual entry Ø0.70 No. OF CONTACTS PER ROW 03 to 50 All dimensions in mm. www.harwin.com 106 42 Gold + Tin (M50-315) 45 Gold (M50-312) Archer Connectors – M50 Jumper Sockets Can be fitted and removed by hand, giving an alternative on-board programming method to DIP switches. Suitable for use with pin headers shown on pages 108 and 109. Choice of colours available. closed top with handle 2.50 2.50 0.85 1.50 5.50 3.00 3.00 1.27 1.25 1.27 HOW TO ORDER M50 - XXX 05 Series code Finish 05 TYPE Closed Top Closed Top with Handle 190 Black 200 Black 192 Red 202 Red 193 Blue 203 Blue All dimensions in mm. www.harwin.com 107 Gold 1.27mm (.050") Pitch CLOSED TOP Archer Connectors – M50 Male Vertical & Horizontal Suitable for use with female connectors and jumper sockets on pages 104 to 107. Also available with variable dimensions, see page 109. vertical pc tail horizontal pc tail 0.40 square 0.40 square B B 1.27 1.27 1.27 1.27 1.27mm (.050") Pitch B B 1.27 0.40 square 1.27 1.27 1.27 2.50 1.00 2.50 1.00 3.80 3.80 1.27 2.00 1.27 3.41 3.00 3.00 6.30 6.30 Selective Selective Gold Gold In This Area In This Area 1.00 1.00 A A 3.40 3.40 A A 2.00 B B 1.27 1.27 3.41 B 0.75 1.27 1.27 Ø0.65 Recommended PC Board Pattern 6.50 Ø0.65 Calculation 2.50 vertical smt Recommended PC Board Pattern A 1.27 x No. of contacts per row B 1.27 x (No. of contacts per row - 1) 3.40 B 0.40 square 1.27 B 1.27 0.75 1.00 1.68 1.27 3.00 6.50 A 1.27 2.50 Recommended PC Board Pattern 5.50 3.40 B 0.40 square 1.27 HOW TO ORDER 1.27 M50 - 3 X 0 XX 42 1.00 FINISH Series code 42 TYPE Gold + Tin A 5 Vertical PC Tail 6 Vertical SMT 9 Horizontal PC Tail No. OF CONTACTS PER ROW 01 to 50 All dimensions in mm. www.harwin.com 108 1.68 5.50 Archer Connectors – M50 Pin Header Variants If you are unable to specify the connector you require from our standard range of Archer M50 connectors (page 108), use the order code below to create an application-specific connector. Contact [email protected] for further information, or search online for M50-XXX. Suitable for use with female connectors and jumper sockets on pages 104 to 107. TERMINATION STYLES 3.40 Extended PC Tail Vertical SMT 3.40 1.27 A A A W Series F Series S Series B 1.00 B Pin section is 0.40mm square. PCB mounting hole is Ø0.65mm. 2.30 1.27 Pin section is 0.40mm square. PCB mounting hole is Ø0.65mm. 3.40 Extended SMT 3.40 1.68 5.50 Pin section is 0.40mm square. For PCB pad layout see page 108. B dimension is 000. Horizontal PC Tail 1.27 3.40 B A A T Series J Series 1.00 1.50 B 1.00 Pin section is 0.40mm square. For PCB pad layout see page 108. A+B+0.68 not to exceed 24.3mm. 5.50 Pin section is 0.40mm square. PCB mounting hole is Ø0.65mm. 1.27 0.68 HOW TO ORDER M50 - XXX XXX X XX 45 Series code Finish 45 Dimension A No. OF CONTACTS PER ROW Example: 7.8mm = 078 Dimension B Example: 5.0mm = 050 01 to 50 Double Row W Vertical PC Tail F Extended PC Tail S Vertical SMT T Extended SMT J Horizontal PC Tail All dimensions in mm. www.harwin.com Gold 109 1.27mm (.050") Pitch 1.27 Vertical PC Tail