Datamate Connectors Features and Benefits Shielded High-Reliability connectors, for I/O and cable-to-board applications. Performs to the same high standards as the existing Datamate range, but with the added facility of complete shielding for cable-to-panel and PCB applications where EMI and RFI screening is required. Tested in accordance with MIL-STD-1377. 30dBs attenuation. Typical Applications Avionic Systems Communications Systems Control Systems Radar Equipment Space Applications Life Sciences Specifications Materials Mechanical Durability: 500 operations Insertion force (max):2.8N Withdrawal force (min):0.2N Signal crimp accommodation:22 A.W.G. to 28 A.W.G. BS 3G 210 Type A, MIL-W-16878 Mouldings:Glass-filled thermoplastic UL94V-0 Female contacts:Brass shell, with Beryllium Copper inner contact Male contacts: Copper alloy Finish: See individual pages Environmental Electrical Environmental classification: 55/125/56 days at 95% RH Operational temperature: -55ºC to +125ºC *Vibration sensitivity:10Hz to 2000Hz, 0.75mm, 98m/s2 (10G). duration 6h *Bump severity:390m/s2 (40G), 4000 ±10 bumps *Shock severity: 981m/s2 (100G) for 6ms *Acceleration severity: 490m/s2 (50G) RF Attenuation: 10kHz to 400MHz @ >30dBs Current (individual contacts in isolation):3.3A max (at 25°C) 2.6A max (at 85°C) All contacts simultaneously:3.0A max (at 25°C) 2.2A max (at 85°C) Working Voltage (at sea level 1013 mbar): 800V DC or ACrms Voltage Proof (at sea level 1013 mbar): Contact resistance (initial): Contact resistance (after conditioning): Insulation resistance (initial): Insulation resistance (after conditioning): 1,200V DC or ACrms 20 mΩ max * Tested with connectors with Jackscrews. All preferred sizes of this range are held in stock. Check www.harwin.com for availability. 25 mΩ max 1,000 MΩ min 100 MΩ min See page 35 for Pin Numbering Mating Profiles MALE FEMALE PC TAIL CRIMP 33.55 max 33.55 max CRIMP All dimensions in mm. www.harwin.com 71 Datamate S-TEK Nickel-plated aluminium alloy construction, 360° attachment to braid. Datamate Connectors Female Crimp with Metal Backshell DATAMATE S-TEK A range of shielded Datamate connectors, performing to the same high-reliability standards, with the added feature of aluminium backshells compatible with full 360° securing to braiding. Supplied as a kit, including backshell, tie-band (not shown), e-clips, Jackscrews, connector housing and contacts (braiding not included). For spare crimp contacts, see page 51. Mates with male connectors shown on pages 73 and 74. FEmale 10.70 3.40 A B 26.75 C tools Recommended Crimp Tool – M22520/2-01 Positioner – T5747 Contact Insertion/Removal Tool – Z80-280 E-Clip Assembly Tool – Z80-300 See pages 87 to 89 M2 Instruction sheets available at www.harwin.com/downloads/instructions Wire Stripping Details Calculation A B + 16.20 B Total no. of contacts - 2 C B+7 ø1.10 max 2.00 nominal HOW TO ORDER M80 - 4 X1 XX XX S1 Finish Series code 05 Gold 42 Gold + Tin type C1 Small Bore 24-28 AWG total No. of contacts D1 Large Bore 22 AWG 06, 10, 14, 20, 26 All dimensions in mm. www.harwin.com 72 Datamate Connectors Male Vertical PC Tail with Metal Backshell Calculation B 2.00 2.00 Ø0.65 min A B + 13.40 B Total no. of contacts - 2 C B+7 Ø2.20 min C Recommended PC Board Pattern 2.7mm TAIL 3.8mm TAIL C B C B 2.00 2.00 2.00 No. 1 contact 2.00 No. 1 contact A 7.90 A 7.90 8.10 ø0.50 M2 8.10 2.70 ø0.50 3.80 M2 HOW TO ORDER M80 - 5 TX XX XX B1 Finish Series code 05 Gold 22 Gold + Tin/Lead 42 Gold + Tin type T1 total No. of contacts 2.7mm Tails T2 3.8mm Tails 06, 10, 14, 20, 26 All dimensions in mm. www.harwin.com 73 Datamate S-TEK Board Mount version, with Jackscrew fixings for attachment to PCB for added strain relief. Supplied as a complete kit, including backshell, jackscrew nuts, and connector with Jackscrew studs assembled. Mates with female connectors shown on page 72. Datamate Connectors Male Crimp with Metal Backshell Panel mount version, with Jackscrew fixings for attachment to panels. Supplied as a complete kit, including backshell, contacts, Jackscrew nuts, and connector housing with jackscrew studs assembled. For spare crimp contacts, see page 65. Mates with female connectors shown on page 72. DATAMATE S-TEK Calculation 8.10 7.90 A 1.70 A B + 13.40 B Total no. of contacts - 2 C B+7 C B tools M2 Recommended Crimp Tool – M22520/2-01 Positioner – Z80-193 Contact Insertion/Removal Tool – Z80-280 See pages 87 to 89 C B+3 Instruction sheets available at www.harwin.com/downloads/instructions Wire Stripping Details ø2.20 min ø1.10 max 6.00 Recommended Panel Cutout 2.00 nominal HOW TO ORDER M80 - 5 X1 XX 05 B1 Series code Finish 05 Gold type C1 Small Bore 24-28 AWG total No. of contacts D1 Large Bore 22 AWG 06, 10, 14, 20, 26 All dimensions in mm. www.harwin.com 74