30TPS...PbF High Voltage Series Vishay High Power Products Phase Control SCR, 20 A DESCRIPTION/FEATURES 2 (A) TO-247AC 1 (K) (G) 3 PRODUCT SUMMARY VT at 20 A < 1.3 V ITSM 300 A VRRM 800/1200 V The 30TPS...PbF High Voltage Series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125 °C junction temperature. Pb-free Available RoHS* COMPLIANT Typical applications are in input rectification (soft start) and these products are designed to be used with Vishay HPP input diodes, switches and output rectifiers which are available in identical package outlines. This product has been designed and qualified for industrial level and lead (Pb)-free (“PbF” suffix). MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) TEST CONDITIONS VALUES Sinusoidal waveform UNITS 20 A IRMS 30 VRRM/VDRM 800/1200 V 300 A 1.3 V dV/dt 500 V/µs dI/dt 150 A/µs - 40 to 125 °C VRRM/VDRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM/IDRM AT 125 °C mA 30TPS08PbF 800 900 30TPS12PbF 1200 1300 ITSM VT 20 A, TJ = 25 °C TJ VOLTAGE RATINGS PART NUMBER 10 * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94386 Revision: 06-Jun-08 For technical questions, contact: [email protected] www.vishay.com 1 30TPS...PbF High Voltage Series Vishay High Power Products Phase Control SCR, 20 A ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average on-state current IT(AV) Maximum RMS on-state current IRMS Maximum peak, one-cycle non-repetitive surge current ITSM VALUES 20 10 ms sine pulse, rated VRRM applied 250 10 ms sine pulse, no voltage reapplied 300 30 UNITS A 10 ms sine pulse, rated VRRM applied 310 10 ms sine pulse, no voltage reapplied 442 I2√t t = 0.1 to 10 ms, no voltage reapplied 4420 A2√s VTM 20 A, TJ = 25 °C 1.3 V 12 mΩ 1.0 V Maximum I2t for fusing I2 t Maximum I2√t for fusing Maximum on-state voltage drop On-state slope resistance TEST CONDITIONS TC = 95 °C, 180° conduction half sine wave rt Threshold voltage VT(TO) Maximum reverse and direct leakage current IRM/IDM TJ = 125 °C TJ = 25 °C TJ = 125 °C VR = Rated VRRM/VDRM A2s 0.5 10 Maximum holding current IH Anode supply = 6 V, resistive load, initial IT = 1 A 100 Maximum latching current IL Anode supply = 6 V, resistive load 200 mA Maximum rate of rise of off-state voltage dV/dt 500 V/µs Maximum rate of rise of turned-on current dI/dt 150 A/µs VALUES UNITS TRIGGERING PARAMETER SYMBOL Maximum peak gate power TEST CONDITIONS PGM 8.0 PG(AV) 2.0 Maximum peak positive gate current + IGM 1.5 A Maximum peak negative gate voltage - VGM 10 V Maximum average gate power Maximum required DC gate current to trigger Maximum required DC gate voltage to trigger IGT VGT Maximum DC gate voltage not to trigger VGD Maximum DC gate current not to trigger IGD Anode supply = 6 V, resistive load, TJ = - 10 °C 60 Anode supply = 6 V, resistive load, TJ = 25 °C 45 Anode supply = 6 V, resistive load, TJ = 125 °C 20 Anode supply = 6 V, resistive load, TJ = - 10 °C 2.5 Anode supply = 6 V, resistive load, TJ = 25 °C 2.0 Anode supply = 6 V, resistive load, TJ = 125 °C 1.0 TJ = 125 °C, VDRM = Rated value W mA V 0.25 2.0 mA VALUES UNITS SWITCHING PARAMETER SYMBOL Typical turn-on time tgt Typical reverse recovery time trr Typical turn-off time tq www.vishay.com 2 TEST CONDITIONS TJ = 25 °C TJ = 125 °C For technical questions, contact: [email protected] 0.9 4 µs 110 Document Number: 94386 Revision: 06-Jun-08 30TPS...PbF High Voltage Series Phase Control SCR, 20 A Vishay High Power Products THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Maximum thermal resistance, case to heatsink RthCS TEST CONDITIONS Marking device Document Number: 94386 Revision: 06-Jun-08 UNITS - 40 to 125 °C 0.8 DC operation °C/W 40 Mounting surface, smooth and greased Approximate weight Mounting torque VALUES 0.2 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf · cm (lbf · in) Case style TO-247AC (JEDEC) For technical questions, contact: [email protected] 30TPS08 30TPS12 www.vishay.com 3 30TPS...PbF High Voltage Series 30TPS.. Series R thJC (DC) = 0.8 °C/ W 120 Conduction Angle 110 30° 60° 90° 100 120° 180° 90 0 5 10 15 20 25 60 40 RMS Limit Conduction Period 20 30TPS.. Series TJ = 125°C 0 0 10 20 30 40 50 Average On-state Current (A) Fig. 4 - On-State Power Loss Characteristics 120 110 Conduction Period 100 30° 60° 90 90° 120° 180° DC 80 5 10 15 20 25 30 35 RMS Limit 30 Conduction Angle 30TPS.. Series TJ= 125°C 10 0 5 10 15 20 25 30 Peak Half Sine Wave On-state Current (A) 180° 120° 90° 60° 30° 20 220 200 180 160 140 30TPS.. Series 120 10 100 Fig. 5 - Maximum Non-Repetitive Surge Current 60 40 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 125°C @ 60 Hz 0.0083 s 240 @50 Hz 0.0100 s 260 1 Fig. 2 - Current Rating Characteristics 50 280 Numb er Of Equa l Amplitude Ha lf Cyc le Current Pulses (N) Average On-state Current (A) Maximum Average On-state Power Loss (W) DC 180° 120° 90° 60° 30° Average On-state Current (A) 30TPS.. Series RthJC (DC) = 0.8 °C/ W 0 80 Fig. 1 - Current Rating Characteristics 130 0 Maximum Average On-state Power Loss (W) 130 Peak Half Sine Wave On-state Current (A) Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) Vishay High Power Products Phase Control SCR, 20 A 300 280 260 240 Maximum Non Repetitive Surge Current Versus Pulse Tra in Duration. Control Of Conduc tion May Not Be Ma intained. Initial TJ= 125°C No Voltage Reapplied Rated VRRMReapplied 220 200 180 160 140 30TPS.. Series 120 0.01 0.1 1 Average On-state Current (A) Pulse Train Duration (s) Fig. 3 - On-State Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94386 Revision: 06-Jun-08 30TPS...PbF High Voltage Series Phase Control SCR, 20 A Vishay High Power Products Instantaneous On-state Current (A) 1000 TJ= 25°C TJ= 125°C 100 10 30TPS.. Series 1 0 1 2 3 4 5 6 7 Instantaneous On-state Voltage (V) Transient Thermal Impedance Z thJC (°C/ W) Fig. 7 - On-State Voltage Drop Characteristics 1 Steady State Value (DC Operation) D = 0.50 D = 0.33 D = 0.25 D = 0.17 0.1 D = 0.08 Single Pulse 30TPS.. Series 0.01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Rec tangular gate p ulse a )Rec ommend ed loa d line for rated di/ dt: 10 V, 20 ohms tr = 0.5 µs, tp >= 6 µs b)Recommend ed load line for <= 30% rated di/ dt: 10 V, 65 ohms 10 tr = 1 µs, tp >= 6 µs (1) PGM = 40 W, tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms (a ) (b ) VGD IGD 0.1 0.001 TJ = -10 °C TJ = 125 °C 1 TJ = 25 °C Instantaneous Gate Voltage (V) 100 (4) 0.1 (2) (1) Frequency Limited by PG(AV) 30TPS.. Series 0.01 (3) 1 10 100 Instantaneous Gate Current (A) Fig. 9 - Gate Characteristics Document Number: 94386 Revision: 06-Jun-08 For technical questions, contact: [email protected] www.vishay.com 5 30TPS...PbF High Voltage Series Vishay High Power Products Phase Control SCR, 20 A ORDERING INFORMATION TABLE Device code 30 T P S 12 PbF 1 2 3 4 5 6 1 - Current rating (30 = 30 A) 2 - Circuit configuration: T = Thyristor 3 - Package: P = TO-247 4 - Type of silicon: S = Standard recovery rectifier 5 - 6 - Voltage code x 100 = VRRM 08 = 800 V 12 = 1200 V None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95223 Part marking information http://www.vishay.com/doc?95226 www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 94386 Revision: 06-Jun-08 Outline Dimensions www.vishay.com Vishay Semiconductors DIMENSIONS in millimeters and inches A A (3) (6) Ø P E B (2) R/2 N A2 S (Datum B) Ø K M DBM FP1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb 0.10 M C A M Planting (4) E1 0.01 M D B M View A - A C 2x e A1 b4 (b1, b3, b5) Lead assignments Base metal D DE (c) c1 E C C Diodes 1. - Anode/open 2. - Cathode 3. - Anode (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.50 2.49 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.37 2.59 3.43 2.59 3.38 0.38 0.86 0.38 0.76 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.059 0.098 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.094 0.102 0.135 0.102 0.133 0.015 0.034 0.015 0.030 0.776 0.815 0.515 - View B NOTES SYMBOL 3 4 D2 E E1 e FK L L1 N P P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.30 15.29 15.87 13.72 5.46 BSC 2.54 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 6.98 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.051 0.602 0.625 0.540 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.275 0.209 0.224 1.78 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC outline TO-247 with exception of dimension c Revision: 16-Jun-11 Document Number: 95223 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1