Multilayer Ceramic Chip Capacitors FEATURES • CLASS II DIELECTRIC, TEMPERATURE STABLE • EXCELLENT FREQUENCY CHARACTERISTICS, NON-LINEAR CAPACITANCE CHANGE • NICKEL BARRIER TERMINATIONS AND EXCELLENT MECHANICAL STRENGTH NMC Series X5R Expanded 01005 Case Size CHARACTERISTICS Capacitance Range Capacitance Tolerance Operating Temperature Range Temperature Characteristics Rated Voltages Dissipation Factor 100pF ~ 0.82µF (see high CV datasheet for higher capacitance values) ±10% (K), ±20% (M) -55°C ~ +85°C ±15%∆ max. over temperature range (with 0 Vdc applied) 6.3Vdc, 10Vdc, 16Vdc & 25Vdc (see NMC-H Series for higher voltages) 3.5% max. (< 0.1µF, 25Vdc), 5% max. (all 16Vdc & >0.1µF, 25Vdc), 7.5% (10Vdc), 10% (6.3Vdc) @ 1.0Vrms and 1KHz, +25°C 10,000Megohms min. or 500Megohm/µF min. whichever is less @ +25°C 250% of Rated Voltage for 5 ±1 seconds, 50mA maximum current 1KHz, 1.0V ±0.2Vrms insulation Resistance Dielectric Withstanding Voltage Test Conditions (EIA-198-2E) Typical X5R Temperature Coefficient 20% %∆°C 10% 0% -10% -20% Insulation Resistance (Ohm - Farads) -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Insulation Resistance vs. Temperature 10,000 1,000 100 0 +20 +30 +40 +50 +60 +70 +80 Temperature °C PART NUMBER SYSTEM NMC 0805 X5R 102 K 50 TRP or TRPLP 3K 7C3 F ® 1 RoHS Compliant Optional RoHS 7C-III Exemption Free* Optional Reel Qty (3K=3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Punched carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series * - Part Number Level Identification of X5R MLCCs that do not take RoHS exemption 7C-III NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) 01005 0.4±0.02 0.2±0.02 0.22 0.1±0.03 EIA Case Size 0201 Length (L) 0.6 ± 0.05 Width (W) 0.3 ± 0.05 Thickness max. (T) 0.33 Termination Width (P) 0.10 ~ 0.20 Capacitance Working Voltage (Vdc) 6.3 10 Capacitance 6.3 10 0402 0603 1.0±0.05 1.6±0.15 0.5±0.05 0.8±0.15 0.6 1.0 0.2±0.1 0.12 ~ 0.51 Working Voltage (Vdc) 6.3 10 16 6.3 10 16 25 0.0012µF 0.0015µF 0.0018µF 0.0022µF 0.0027µF 0.0033µF 0.0039µF 0.0047µF 0.0056µF 0.0068µF 0.0075µF 0.0082µF 0.01µF 0.015µF 0.018µF 0.022µF 0.027µF 0.033µF 0.036µF 0.039µF 0.047µF 0.056µF 0.068µF 0.075µF 0.082µF 0.1µF 0.15µF 0.18µF 0.22µF 0.27µF 0.33µF 0.36µF 0.39µF 0.47µF 0.68µF 0.82µF 100pF 150pF 220pF 330pF 470pF 680pF 1,000pF 1,500pF 2,200pF 3,300pF 4,700pF 6,800pF 10,000pF W T P NMC Series X5R P L 100% Sn over Ni barrier (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) See NMC High Capacitance datasheet for higher capacitance values or NMC-H High Voltage datasheet for higher voltage ratings ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors REEL Taping Specifications REEL DIMENSIONS (mm) Reel Diameter (A) 7” (178 ± 2.0) 10” (250 ± 2.0) 13” (330 ± 2.0) B D B C 50 min. 100 ± 1.0 100 ± 1.0 13 ± 0.5 D T max. 8.4 +1.0/-0 (1812 case size 12.4 +2.0/-0) 21 ± 1.0 7 INCH REEL QUANTITIES* Size Tape Size Min. Qty Per Reel Max. Qty Per Reel C 01005 8mm 0201 8mm 0402 8mm 0603 8mm 0805 8mm 1206 8mm 1210 8mm 1812 12mm 20,000 20,000 10,000 4,000 4,000 4,000 2,000 1,000 20,000 20,000 10,000 4,000 5,000 5,000 5,000 2,000 *Quantity dependent on chip thickness. Contact NIC for reel quantities on larger diameter reels. CARRIER TAPE MATERIAL T Parts with a thickness of >1mm will be taped on embossed plastic carrier. Parts with a thickness of less then 1mm will be taped on paper carrier A EMBOSSED PLASTIC CARRIER TAPE DIMENSIONS (mm) Tape Size W F 8mm 8.0 ± 0.2 3.5 ± 0.05 12mm 12 ± 0.2 5.5 ± 0.05 E P0 P2 D K max. 1.75 ± 0.10 4.0 ± 0.1 2.0 ± 0.5 1.5 +0.1-0.0 3.0 Notes: 1. Specifications are in compliance with EIA RS481-1-A “Taping of surface Mount Components for Automatic Placement” 2. Dimensions Ao (max.) equals component width dimension plus 0.5mm 3. Dimension Bo (max.) equals component length dimension plus 0.5mm T max. P 2.0 4.0 ± 0.1 4.5 8.0 ± 0.1 EMBOSSED PLASTIC CARRIER TAPE D Po T E P2 F Bo W Ao P K See notes 2 & 3 regarding dimensions Ao and Bo PUNCHED CARRIER TAPE DIMENSIONS (mm) Type Ao Bo 01005 0.25 ± 0.04 0.45 ± 0.04 0201 0.37 ± 0.03 0.67 ± 0.05 0402 0.65 ± 0.05 1.15 ± 0.05 0603 1.1 ± 0.2 1.9 ± 0.2 0805 1.65 ± 0.2 2.4 ± 0.2 1206 2.0 ± 0.2 3.6 ± 0.2 W F E P1 P0 D0 4.0 ± 0.1 1.5 +0.1/-0.0 2.0 ± 0.05 8.0 ± 0.3 3.5 ± 0.05 1.75 ± 0.1 4.0 ± 0.10 T1 max. 0.27 0.45 T2 max. 0.36 0.80 1.1 1.4 Mounting Hole Angular Punch Hole PUNCHED CARRIER TAPE D Po t1 E F Bo ® 3 t2 NIC COMPONENTS CORP. www.niccomp.com Ao W P1 Component Pitch www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com