Multilayer Ceramic Chip Capacitors NMC Series NPO FEATURES RoHS • CLASS I DIELECTRIC, TEMPERATURE COMPENSATING Compliant • HIGH STABILITY OVER TIME, VOLTAGE AND includes all homogeneous materials • • TEMPERATURE CHANGES LOW DIELECTRIC LOSS NICKEL BARRIER TERMINATIONS AND EXCELLENT MECHANICAL STRENGTH *See Part Number System for Details SPECIFICATIONS NPO Capacitance Range Capacitance Tolerance 0.47pF to 0.068μF Below 10pF: ±0.1pF(B), ± 0.25pF(C), ±0.5pF(D) 10pF and above: ±1%(F), ±2%(G), ±5% (J) -55°C ~ +125°C 0 ± 30ppm/°C 25Vdc, 35Vdc, 50Vdc (see NMC-H Series for higher voltages) For values >30pF 0.1% @ 25°C; For values < 30pF Q=400+20 x C (C in pF) 100,000Megohms min. or 1000Megohm/μF (min.), whichever is less @ +25°C 250% of Rated Voltage for 5 ±1 seconds, 50mA maximum current <1000pF; 1MHz, 1.2Vrms max. or >1000pF; 1KHz, 1.2Vrms max. Operating Temperature Range Temperature Characteristics Rated Voltages Dissipation Factor insulation Resistance Dielectric Withstanding Voltage Test Conditions (EIA-198-2E) Typical NPO Temperature Coefficient 0.4 0.3 0.2 0.1 0.0 -0.1 -0.2 -0.3 -0.4 -55 Voltage Coefficient of Capacitance - NPO 0.2 10,000 0.1 Minimum Insulation Resistance vs Temperature 1000 0.0 100 -0.1 -25 0 25 50 75 100 Temperature (Degrees Celsius) 125 -0.2 10 10 0 10 20 30 40 50 60 70 80 90 100 DC Volts Applied Impedance vs. Frequency NPO Aging Rate - NPO 0.2 1000 100 25 100 150 Temperature (Degrees C) 0.1 1000pF 10 100pF 0.0 1 -0.1 0.1 -0.2 0.01 1 10 100 Frequency (MHz) 1000 1 10 100 Hours 1000 10000 PART NUMBER SYSTEM NMC 0805 NPO 101 J 50 TRP or TRPLP 3K F RoHS Compliant Optional Reel Qty (3K=3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 Multilayer Ceramic Chip Capacitors NMC Series NPO NPO CAPACITOR SIZE CHART (mm) (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance W H P P L 100% Sn over Ni barrier 0201 0.6±0.03 0.3±0.03 0.33 0.15±0.05 0402 0603 0805 1.0±0.05 1.6±0.15 2.0±0.2 0.5±0.05 0.8±0.15 1.25±0.2 0.6 1.0 1.35 0.2±0.1 0.12 ~ 0.51 0.25 ~ 0.71 Working Voltage (Vdc) 10 16 25 50 16 25 50 100 16 25 50 100 16 25 50 100 0.47pF ~ 22pF 24pF 27pF 30pF 33pF 36pF 39pF 43pF 47pF 51pF 56pF 62pF 68pF 75pF 82pF 91pF 100pF 110pF 120pF 130pF 150pF 160pF 180pF 200pF 220pF 240pF 270pF 300pF 330pF 360pF 390pF 430pF 470pF 510pF 560pF 620pF 680pF 750pF 820pF 910pF 0.001μF 0.0012μF 0.0015μF 0.0018μF 0.0022μF 0.0027μF 0.0033μF 0.0039μF 0.0047μF 0.0056μF 0.0068μF 0.0082μF * * * * * * * * * * * *1.45mm maximum thickness ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC Series NPO NPO CAPACITOR SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 0.47pF ~ 9.1pF 10pF ~ 22pF 24pF ~ 0.001μF 0.0012μF 0.0015μF 0.0018μF 0.0022μF 0.0027μF 0.0033μF 0.0039μF 0.0047μF 0.0056μF 0.0068μF 0.0075μF 0.0082μF 0.0091μF 0.01μF 0.012μF 0.015μF 0.018μF 0.022μF 0.027μF 0.033μF 0.039μF 0.047μF 0.056μF 0805 2.0±0.2 1.25±0.2 1.45 0.25 ~ 0.71 1206 3,2±0.2 1.6±0.2 1.80 0.25 ~ 0.71 1210 3.2±0.2 2.5±0.2 1.80 0.25 ~ 0.71 Working Voltage (Vdc) 16 25 50 100 10 16 25 50 100 10 16 25 50 100 1812 4.5±0.3 3.2±0.25 1.80 0.25 ~ 0.76 25 50 100 2225 5.70±0.4 6.35±0.25 1.80 0.25 ~ 1.02 50 100 See the previous page * * ** ** ** ** *1.90mm maximum thickness, **2.60mm maximum thickness ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 3 Multilayer Ceramic Chip Capacitors NMC Series X7R FEATURES • CLASS II DIELECTRIC, TEMPERATURE STABLE • EXCELLENT FREQUENCY CHARACTERISTICS, NON-LINEAR CAPACITANCE CHANGE RoHS • HIGHER CAPACITANCE THAN NPO Compliant • NICKEL BARRIER TERMINATIONS AND EXCELLENT includes all homogeneous materials MECHANICAL STRENGTH *See Part Number System for Details Capacitance Range Capacitance Tolerance Operating Temperature Range Temperature Characteristics Rated Voltages Dissipation Factor 470pF ~ 0.82μF (see high CV datasheet for higher capacitance values) ±5% (J), ±10% (K), ±20% (M) -55°C ~ +125°C ±15%Δ max. over temperature range (with 0 Vdc applied) 16Vdc, 25Vdc, 35Vdc, 50Vdc (see NMC-H Series for higher voltages) 2.5% max. (50Vdc, 100Vdc); 3.5% max. (16Vdc, 25Vdc) 5% max. (10Vdc) @ 1.0Vrms and 1KHz, +25°C 100Gigohms min. or 1000Megohm/μF min. whichever is less @ +25°C 250% of Rated Voltage for 5 ±1 seconds, 50mA maximum current 1KHz, 1.0V ±0.2Vrms insulation Resistance Dielectric Withstanding Voltage Test Conditions (EIA-198-2E) Voltage Coefficient of Capacitance - X7R % Capacitance Change % Capacitance Change Typical X7R Temperature Coefficient Temperature °C DC Volts Applied Frequency (MHz) Insulation Resistance (Ω Farads) Impedance Ω Minimum Insulation Resistance vs. Temperature % Dissipation Factor vs. Temperature % Dissipation Factor Impedance vs. Frequency - X7R 10000 1000 100 10 10 25 Temperature °C 100 125 Temperature °C PART NUMBER SYSTEM NMC 0805 X7R 102 K 50 TRP or TRPLP 3K F RoHS Compliant Optional Reel Qty (3K=3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series ® 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC Series X7R X7R CAPACITOR SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 0201 0.6±0.03 0.3±0.03 0.3±0.03 0.15±0.05 16 25 50 0402 1.0±0.05 0.5±0.05 0.6 0.2±0.1 10 16 25 0603 1.6±0.15 0.8±0.15 1.0 0.12 ~ 0.51 Working Voltage (Vdc) 50 10 16 25 50 100 10 47pF ~ 91pF 100pF ~ 470pF 510pF 560pF 620pF 680pF 750pF 820pF 910pF 0.001μF 0.0012μF 0.0015μF 0.0018μF 0.0022μF 0.0027μF 0.0030μF 0.0033μF 0.0039μF 0.0047μF 0.0056μF 0.0068μF 0.0075μF 0.0082μF 0.01μF 0.012μF 0.015μF 0.018μF 0.022μF 0.033μF 0.039μF 0.047μF 0.056μF 0.068μF 0.082μF 0.1μF 0.15μF 0.18μF 0.22μF 0.33μF 0.39μF 0.47μF 0.56μF 0.68μF 0.82μF 0805 2.0±0.2 1.25±0.2 1.35 0.25 ~ 0.71 16 25 50 * * * * * * * * * * * * * * * * * * * * * 100 * * *1.45mm maximum thickness See NMC High CV series for values above 0.82μF ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 5 Multilayer Ceramic Chip Capacitors NMC Series X7R X7R CAPACITOR SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1206 3.2±0.2 1.6±0.2 1.80 0.25 ~ 0.71 6.3 10 16 25 50 100 10 1210 3.2±0.2 2.5±0.2 1.80 0.25~0.75 Working Voltage (Vdc) 16 25 35 50 100 10 1812 4.5±0.3 3.2±0.25 1.8 0.25 ~ 0.75 16 150pF ~ 910pF 0.001 0.0012μF 0.0015μF 0.0018μF 0.0022μF 0.0027μF 0.0033μF 0.0036μF 0.0039μF 0.0043μF 0.0047μF 0.0056μF 0.0068μF 0.0075μF 0.0082μF 0.01μF 0.012μF 0.015μF 0.018μF 0.022μF 0.027μF 0.033μF 0.036μF 0.039μF 0.043μF 0.047μF 0.056μF 0.068μF 0.082μF 0.1μF 0.12μF 0.15μF 0.18μF 0.22μF 0.27μF 0.33μF 0.39μF 0.47μF 0.56μF 0.68μF 0.82μF 25 2225 5.7±0.4 6.35±0.25 1.80 0.25 ~ 1.02 50 100 25 * 50 100 * * 2.20mm maximum thickness See NMC High CV series for values above 0.82μF ® 6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC Series X5R FEATURES • CLASS II DIELECTRIC, TEMPERATURE STABLE • EXCELLENT FREQUENCY CHARACTERISTICS, NON-LINEAR CAPACITANCE CHANGE RoHS • NICKEL BARRIER TERMINATIONS AND EXCELLENT Compliant MECHANICAL STRENGTH includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS Capacitance Range Capacitance Tolerance Operating Temperature Range Temperature Characteristics Rated Voltages Dissipation Factor 0.0012μF ~ 0.82μF (see high CV datasheet for higher capacitance values) ±10% (K), ±20% (M) -55°C ~ +85°C ±15%Δ max. over temperature range (with 0 Vdc applied) 6.3Vdc, 16Vdc & 25Vdc (see NMC-H Series for higher voltages) 3.5% max. (25Vdc) 5% max. (16Vdc), 7.5% (10Vdc), 10% (6.3Vdc) @ 1.0Vrms and 1KHz, +25°C 10Gigohms min. or 500Megohm/μF min. whichever is less @ +25°C 250% of Rated Voltage for 5 ±1 seconds, 50mA maximum current 1KHz, 1.0V ±0.2Vrms insulation Resistance Dielectric Withstanding Voltage Test Conditions (EIA-198-2E) Typical X5R Temperature Coefficient 20% %Δ°C 10% 0% -10% -20% Insulation Resistance (Ohm - Farads) -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Insulation Resistance vs. Temperature 10,000 1,000 100 0 +20 +30 +40 +50 +60 +70 +80 Temperature °C PART NUMBER SYSTEM NMC 0805 X5R 102 K 50 TRP or TRPLP 3K F ® NIC COMPONENTS CORP. RoHS Compliant Optional Reel Qty (3K=3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 7 Multilayer Ceramic Chip Capacitors NMC Series X5R X5R CAPACITOR SIZE CHART (mm) (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) EIA Case Size 0201 Length (L) 0.6 ± 0.05 Width (W) 0.3 ± 0.05 Thickness max. (T) 0.33 Termination Width (P) 0.10 ~ 0.20 W H P P L 100% Sn over Ni barrier Capacitance 6.3 10 0603 0402 1.6±0.15 1.0±0.05 0.8±0.15 0.5±0.05 1.0 0.6 0.12 ~ 0.51 0.2±0.1 Working Voltage (Vdc) 6.3 10 16 6.3 10 16 0.0012μF 0.0015μF 0.0018μF 0.0022μF 0.0027μF 0.0033μF 0.0039μF 0.0047μF 0.0056μF 0.0068μF 0.0075μF 0.0082μF 0.01μF 0.015μF 0.018μF 0.022μF 0.027μF 0.033μF 0.036μF 0.039μF 0.047μF 0.056μF 0.068μF 0.075μF 0.082μF 0.1μF 0.15μF 0.18μF 0.22μF 0.27μF 0.33μF 0.36μF 0.39μF 0.47μF 0.56μF 0.68μF 0.82μF See NMC High CV series for values above 0.82μF ® 8 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors FEATURES • HIGH K DIELECTRIC • HIGH CAPACITANCE DENSITY • EXCELLENT MECHANICAL STRENGTH • NICKEL BARRIER TERMINATIONS NMC Series Y5V RoHS Compliant includes all homogeneous materials *See Part Number System for Details Capacitance Range Capacitance Tolerance Operating Temperature Range Temperature Characteristics Rated Voltages Dissipation Factor insulation Resistance Dielectric Withstanding Voltage Test Conditions (EIA-198-2E) 0.01μF ~ 0.82μF (see high CV datasheet for higher capacitance values) +80%/-20% (Z) -30°C ~ +85°C +22%, -82% max. capacitance Δ over temperature range 6.3Vdc, 16Vdc, 25Vdc, 50Vdc & 100Vdc (see NMC-H Series for higher voltages) (See Values Table) 10Gigohms min. or 500Megohm/μF min. whichever is less @ +25°C 150% of Rated Voltage for 5 ±1 seconds, 50mA maximum current 1KHz, 1.0V ±0.2Vrms PART NUMBER SYSTEM NMC 0805 Y5V 103 Z 50 TRP or TRPLP 3K F RoHS Compliant Optional Reel Qty (3K=3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 9 Multilayer Ceramic Chip Capacitors NMC Series Y5V Y5V CAPACITOR SIZE AND DISSIPATION FACTOR CHART (mm) EIA Case Size 0201 Length (L) 0.6 ± 0.05 Width (W) 0.3 ± 0.05 Thickness max. (T) 0.33 Termination Width (P) 0.10 ~ 0.20 Capacitance 0.01μF 0.015μF 0.022μF 0.027μF 0.033μF 0.036μF 0.039μF 0.047μF 0.056μF 0.068μF 0.075μF 0.082μF 0.1μF 0.15μF 0.18μF 0.22μF 0.27μF 0.33μF 0.36μF 0.39μF 0.47μF 0.56μF 0.68μF 0.82μF 4 10 0402 1.0 ± 0.05 0.5 ± 0.05 0.6 0.2±0.1 6.3 10 16 25 50 0603 0805 1.6 ± 0.15 2.0 ± 0.2 0.8 ± 0.15 1.25 ± 0.2 1.0 1.30 0.12 ~ 0.51 0.25 ~ 0.71 Working Voltage (Vdc) 10 16 25 50 6.3 10 16 25 50 100 6.3 1206 3.2 ± 0.2 1.6 ± 0.2 1.80 0.25 ~ 0.71 16 25 50 100 12.5% 9% 7% 7% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 10 9% 5% 5% 5% 12.5% 9% 7% 7% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 16% 12.5% 9% 7% 7% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 16% 12.5% 9% 7% 7% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 16% 12.5% 9% 7% 7% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 16% 12.5% 9% 7% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 16% 12.5% 9% 7% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 16% 12.5% 9% 7% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 16% 12.5% 9% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 16% 12.5% 9% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 16% 12.5% 9% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 16% 12.5% 9% 12.5% 7% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 12.5% 7% 7% 7% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 12.5% 9% 9% 9% 16% 12.5% 9% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 12.5% 9% 9% 9% 16% 12.5% 9% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 12.5% 9% 9% 9% 16% 12.5% 9% 5% 5% 16% 12.5% 9% 5% 5% 5% 16% 12.5% 12.5% 12.5% 9% 16% 12.5% 9% 5% 5% 16% 12.5% 9% 5% 5% 16% 12.5% 12.5% 12.5% 9% 16% 12.5% 9% 7% 7% 16% 12.5% 9% 5% 5% 16% 12.5% 12.5% 12.5% 9% 16% 12.5% 9% 9% 16% 12.5% 9% 5% 5% 16% 12.5% 12.5% 12.5% 9% 16% 12.5% 9% 9% 16% 12.5% 9% 5% 5% 16% 12.5% 12.5% 12.5% 9% 16% 12.5% 9% 9% 16% 12.5% 9% 5% 5% 16% 12.5% 12.5% 9% 16% 12.5% 9% 9% 16% 12.5% 9% 5% 5% 16% 12.5% 12.5% 9% 16% 12.5% 9% 9%* 16% 12.5% 9% 5% 5% 16% 12.5% 12.5% 9% 16% 12.5% 9% 9%* 16% 12.5% 9% 5% 5% *1.35mm maximum thickness Percentages in the table represent the dissipation factor for that value. (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) W H P P L 100% Sn over Ni barrier See NMC High CV series for values above 0.82μF ® 10 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors FEATURES • X7R, X5R AND Y5V DIELECTRICS • HIGH CAPACITANCE DENSITY • ULTRA LOW ESR & ESL • EXCELLENT MECHANICAL STRENGTH • NICKEL BARRIER TERMINATIONS • RoHS COMPLIANT • SAC SOLDER COMPATIBLE* NMC High CV Series RoHS Compliant includes all homogeneous materials *See Part Number System for Details Temperature Coefficient X7R X5R Y5V Capacitance Range 1.0μF ~ 22μF 1.0μF ~ 100μF 1.0μF ~ 100μF Capacitance Tolerance 10% (K) & 20% (M) 10% (K) & 20% (M) +80%/-20% (Z) Operating Temperature Range -55°C ~ +125°C -55°C ~ +85°C -30°C ~ +85°C Temperature Characteristics ±15% Δ Cap. ±15% Δ Cap. +22%, -82% Δ Cap. Rated Voltages 4Vdc, 6.3Vdc, 16Vdc, 25Vdc, 50Vdc & 100Vdc Dissipation Factor See Sizes & Values Tables insulation Resistance 100Megohm/μF minimum @ +25°C Dielectric Withstanding Voltage 250% of Rated Voltage for 5 ±1 sec., 50mA max. 150% of Rated Voltage for 5 ±1 sec., 50mA max. Test Conditions (EIA-198-2E) 1KHz, 0.5V ±0.2Vrms (ALC on) 1KHz, 1.0V ±0.2Vrms (ALC on) *Reflow soldering is recommended. Contact NIC regarding the use of other soldering methods. PART NUMBER SYSTEM NMC 0603 Y5V 105 Z 25 TRP or TRPLP 3K F RoHS Compliant Optional Reel Qty (3K = 3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros Temperature Characteristic (X7R, X5R OR Y5V) Size Code (see chart) Series Typical ESR versus Frequency Typical Capacitance versus Bias Voltage ® NIC COMPONENTS CORP. NMC-HC rev. 002 www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 11 Multilayer Ceramic Chip Capacitors NMC High CV Series X7R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 10μF 22μF 0603 1.6 ± 0.15 0.8 ± 0.15 1.0 0.1 ~ 0.65 6.3V 10 5% 16 5% 10% 0805 2.0 ± 0.2 1.25 ± 0.2 1.35 0.25 ~ 0.75 Working Voltage (V) 10 16 25 6.3 5% 3.5% 5% 6.3 10%* 10%* 10%* 5%* 5%* 1206 3.2±0.2 1.6±0.2 1.90 0.25 ~ 0.85 10 5% 16 5% 25 3.5% 5% 5% 5% 5% 5% 5% 5% 3.5%** 3.5% 3.5% 3.5% 10% 10% * 1.45mm maximum thickness, **2.20mm maximum thickness Percentages in the table represent the dissipation factor for that value. 35 50 3% X7R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 10μF 1210 3.2±0.2 2.5±0.2 2.20 0.25 ~ 1.00 10 5% 5% 16 3.5% 25 3.5% 35 50 3.5% 1812 4.5±0.4 3.2±0.3 1.8 0.25 ~ 1.5 Working Voltage (V) 100 10 16 25 50 2.5%** 5% 3.5% 3.5% 2.5%* 2225 5.7±0.4 6.35±0.25 2.20 0.25 ~ 1.02 100 2.5% 3.5% 3.5% 3.5% 5% 2.5%** 3.5% 5%** *2.20mm maximum thickness, **2.80mm maximum thickness Percentages in the table represent the dissipation factor for that value. 25 2.5% 2.5% 2.5% 50 2.5% 100 2.5% (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) W H P P L 100% Sn over Ni barrier ® 12 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC High CV Series X5R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 6.8μF 10μF 22μF 47μF 0402 1.0 ± 0.05 0.5 ± 0.05 0.6 0.1 ~ 0.3 4 6.3 10% 10% 10% 10 15% 16 10% 0603 1.6 ± 0.15 0.8 ± 0.15 1.0 0.1 ~ 0.65 Working Voltage (Vdc) 6.3 10 16 25 10% 10% 5% 5% 4 10% 10% 10% 10% 10% 12.5% 10% 0805 2.0 ± 0.2 1.25 ± 0.2 1.45 0.20 ~ 0.75 4 3.5% 5% 10% 6.3 10% 10 7.5% 16 5% 25 5% 10% 10% 10% 10% 10% 10% 5% 5% 5% 10% 10% 15% 10% 5% 10% Percentages in the table represent the dissipation factor for that value. X5R HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 6.8μF 10μF 22μF 47μF 100μF 1206 3.2±0.2 1.6±0.2 1.90 0.25 ~ 0.85 1210 3.2±0.3 2.5±0.2 2.2 0.25 ~ 1.0 Working Voltage (Vdc) 6.3 10 16 25 4 6.3 10 16 25 7.5% 7.5% 7.5% 5% 5% 5% 5% 3.5% 3.5% 5% 10% 10% 10% 10% 10% 10% 10% 10% (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) 1812 4.5±0.4 3.2±0.3 2.8 0.25 ~ 1.5 35 5% 3.5% 10 16 5% 5% 25 3.5% 10% 5% 3.5% 3.5%* 10% 10% 5% 5% 5%* 2.5% 10%* 10%* 5%* 10%* 10%* 15%* *2.8mm maximum thickness Percentages in the table represent the dissipation factor for that value. 10% 10% 6.3 5% 10% W H P P L 100% Sn over Ni barrier ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 13 Multilayer Ceramic Chip Capacitors NMC High CV Series Y5V HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size 0402 Length (L) 1.0 ± 0.05 Width (W) 0.5 ± 0.05 Thickness max. (T) 0.6 Termination Width (P) 0.1 ~ 0.3 Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 6.8μF 10μF 22μF 0603 1.6 ± 0.15 0.8 ± 0.15 1.0 0.1 ~ 0.65 6.3 20% 6.3 10 16% 16 16% 20% 16% 16% 20% 12.5% 0805 2.0 ± 0.2 1.25 ± 0.2 1.45 0.25 ~ 0.75 Working Voltage (Vdc) 25 6.3 9% 16% 16% 16% 16% 16% 20% 20% 10 12.5% 12.5% 12.5% 12.5% 12.5% 16% 30% 16 9% 9% 9% 9% 12.5% 25 9% 50 9% 9% *2.5mm maximum thickness Percentages in the table represent the dissipation factor for that value. Y5V HIGH CV CAPACITOR VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1.0μF 1.5μF 2.2μF 3.3μF 4.7μF 6.8μF 10μF 22μF 33μF 47μF 100μF 1206 3.2±0.2 1.6±0.2 1.90 0.25 ~ 0.85 6.3 10 12.5% 12.5% 12.5% 12.5% 12.5% 16% 20% 16% 20% 16% (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) 16 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 1210 3.2±0.2 2.5±0.2 2.2 0.25 ~ 1.0 25 7% 9% 9% 9% 9% 35 7% 9% 9% 50 7% 9% 6.3 10 12.5% 12.5% 12.5% 12.5% 20% 12.5% 12.5% 16% 20% 16% 16 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 16% 25 9% 9% 9% 9% 9% 9% 9% 1812 4.5±0.4 3.2±0.3 2.8 0.25 ~ 1.5 35 50 7% 6.3 7% 7% 7% 20% 16% 20%* 20% *2.5mm maximum thickness Percentages in the table represent the dissipation factor for that value. 10 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 12.5% 16 9% 9% 9% 9% 9% 9% 9% 16% 16% 9% 25 5% 5% 5% 5% 5% 5% 5% 5% 50 5% 5% 5% 5% 5% 5% 5% W H P P L 100% Sn over Ni barrier ® 14 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors FEATURES • CRACK RESISTANT TERMINATION • SOFT TERMINATION, OPEN MODE FAILURE • WIDE VOLTAGE RANGE (16V TO 5KV) • HIGH CAPACITANCE (UP TO 10μF) • RoHS COMPLIANT • SAC SOLDER COMPATIBLE** NMC-P Series RoHS Compliant includes all homogeneous materials *See Part Number System for Details Temperature Coefficient Capacitance Range NPO X7R 2.2pF ~ 0.22μF 180pF ~ 10μF For 2.2pF ~ 10pF: ±0.1pF (B), ±0.25pF (C), ±0.5pF (D), ±1pF (F) Capacitance Tolerance ±10% (K) & ±20% (M) Above 10pF: ±1% (F), ±2% (G), ±5% (J), ±10% (K) Operating Temperature Range -55°C ~ +125°C Temperature Characteristics ±30ppm/°C ±15% Δ Cap. Rated Voltages 16Vdc, 25Vdc, 50Vdc, 100Vdc, 200Vdc, 250Vdc, 500Vdc, 630Vdc, 1KVdc, 2Kvdc, 3Kvdc & 5Kvdc Q = > 1000 (more then 30pF)* 2.5% max. @ 1KHz, 1.0V ± 0.2Vrms Q or Dissipation Factor Q = > 400 + 20 x C in pF (30pF and below)* insulation Resistance 10,000Megohm or 500Megohm/μF whichever is less @ +25°C 200% of rated voltage for 5 seconds, 50mA max. (16V ~ 250V) Dielectric Withstanding Voltage 150% of rated voltage for 5 seconds, 50mA max. (500V ~ 630V) 120% of rated voltage for 5 seconds, 50mA max. (1KV ~ 5KV) *Test Frequency & Voltage: Up to 100pF 1MHz/1.0Vrms, Above 100pF 1KHz/1.0Vrms **Reflow soldering is recommended. Contact NIC regarding the use of other soldering methods. PART NUMBER SYSTEM NMC-P 1206 X7R 105 K 50 TRP or TRPLP F RoHS Compliant Tape & Reel (Plastic Carrier) Tape & Reel (Paper Carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros Temperature Characteristic (NPO or X7R) Size Code (see chart) Series CONSTRUCTION Base layer (Cu 50V ~ 250V) (Ag 500V ~ up) Flexible layer (Polymer) Barrier layer (Ni) Finish layer (Sn) OPEN MODE FAILURE AS A RESULT OF BENDING STRESS Termination Separation (Open Failure Mode) ® NIC COMPONENTS CORP. NMC-P rev. 1 05302007 www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 15 Multilayer Ceramic Chip Capacitors NMC-P Series NPO VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 0603 1.60 ± 0.1 0.80 ± 0.1 0.90 max. 0.15 min. 200V 0805 2.00 ± 0.2 1.25 ± 0.25 1.45 max. 0.20 min. 16 25 1206 3.20 ± 0.3 1.60 ± 0.2 1.80 max. 0.30 min. Working Voltage (Vdc) 50 200 250 500 16 25 50 200 250 500 1KV 2KV 3KV 1210 3.20 ± 0.30 2.50 ± 0.20 2.60 max. 0.30 min. 16 25 50 200 250 500 2.0pF 3.3 3.9 5.0 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 0.001μF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01μF 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.1 ® 16 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-P Series NPO VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1808 4.60 ± 0.3 2.00 ±0.2 2.20 max. 0.30 min. 1812 1825 4.60 ± 0.3 4.60 ± 0.3 3.20 ±0.3 6.35 ±0.4 3.00 max. 2.60 max. 0.30 min. 0.30 min. Working Voltage (Vdc) 1KV 2KV 3KV 5KV 16 25 50 1KV 2KV 3KV 250 500 1KV 2220 5.70 ± 0.4 5.00 ±0.4 3.00 max. 0.30 min. 1KV 5KV 2225 5.70 ± 0.4 6.35 ± 0.4 3.00 max. 0.30 min. 250 500 1KV 2.0pF 3.3 3.9 5.0 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 0.001μF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01μF 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.1 0.12 0.15 0.22 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 17 Multilayer Ceramic Chip Capacitors NMC-P Series X7R LOW VOLTAGE VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 0805 2.00 ± 0.2 1.25 ± 0.25 1.45 max. 0.20 min. 1206 3.20 ± 0.3 1.60 ± 0.2 1.80 max. 0.30 min. 1210 3.20 ± 0.3 2.50 ± 0.2 2.60 max. 0.30 min. 2220 5.70 ± 0.4 5.00 ± 0.4 3.00 max. 0.30 min. 2225 5.70 ± 0.4 6.35 ± 0.4 3.00 max. 0.30 min 50 50 50 50 50 100 100 1812 1825 4.60 ± 0.3 4.60 ± 0.3 3.20 ± 0.3 6.35 ± 0.4 3.00 max. 2.60 max. 0.30 min. 0.30 min. Working Voltage (Vdc) 100 50 100 50 100 100 100 0.1μF 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 X7R HIGH V0LTAGE VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 0805 2.00 ± 0.2 1.25 ± 0.25 1.45 max. 0.20 min. 200 250 500 200 1206 3.20 ± 0.3 1.60 ± 0.2 1.80 max. 0.30 min. Working Voltage (Vdc) 250 500 630 1K 1210 3.20 ± 0.3 2.50 ± 0.2 2.60 max. 0.30 min. 200 250 500 1K 180pF 220 270 330 390 470 560 680 0.001μF 0.0015μF 0.0022μF 0.0027μF 0.0033μF 0.0039μF 0.0047μF 0.0056μF 0.0068μF 0.01μF 0.012μF 0.015μF 0.018μF 0.022μF 0.027μF 0.033μF 0.039μF 0.047μF 0.056μF 0.068μF 0.1μF 0.12μF 0.15μF 0.18μF 0.22μF ® 18 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-P Series X7R HIGH V0LTAGE VALUES AND SIZES (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 1808 4.60 ± 0.3 2.0 ± 0.2 2.20 max. 0.30 min. 500 1K 2K 1812 4.60 ± 0.3 3.2 ± 0.3 3.00 max. 0.30 min. 3K 200 250 500 1825 4.60 ± 0.3 6.35 ± 0.4 2.60 max. 0.30 min. Working Voltage (Vdc) 2K 3K 250 500 1K 1K 2220 5.70 ± 0.4 5.00 ± 0.4 3.00 max. 0.30 min. 250 500 1K 2225 5.70 ± 0.4 6.35 ± 0.4 3.00 max. 0.30 min. 2K 250 500 1K 150pF 180 220 270 330 390 470 560 680 0.001μF 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 1.0 1.5 2.2 W H P P L ® NIC COMPONENTS CORP. 100% Sn over Ni barrier www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 19 Multilayer Ceramic Chip Capacitors NMC-L Series FEATURES • LOWER ESR FOR HIGH FREQUENCY (RF-WIRELESS) APPLICATIONS • EIA STANDARD CASE SIZES (0201, 0402, 0603 & 0805) • NICKEL BARRIER TERMINATION AND EXCELLENT MECHANICAL STRENGTH CHARACTERISTICS SPECIFICATIONS Capacitance Range NPO 0.5pF ~ 150pF Below 10pF: ±0.1pF(B), ±0.25pF(C), ±0.5pF(D) 10pF and above: ±1%(F), ±2%(G), ±5% (J) -55°C ~ +125°C 0 ± 30PPM/°C 50Vdc, 100Vdc 0.01 max. (1MHz, +25°C) 100,000 Megohms min. @ +25°C 250% of rated voltage for 5 ± 1 seconds Capacitance Tolerance Operating Temperature Range Temperature Characteristics Rated Voltage Dissipation Factor insulation Resistance Dielectric Withstanding Voltage RoHS Compliant includes all homogeneous materials *See Part Number System for Details STANDARD VALUES AND CASE SIZES (mm) EIA Case Size 0201 Length (L) 0.6 ± 0.05 Width (W) 0.3 ± 0.05 Thickness (T) 0.33 max. Termination 0.15 ± 0.05 Width (P) Capacitance 1.0pF 1.1pF 1.2pF 1.3pF 1.5pF 1.6pF 1.8pF 2.0pF 2.2pF 2.4pF 2.7pF 3.0pF 3.3pF 3.6pF 3.9pF 4.3pF 4.7pF 5.1pF 5.6pF 6.2pF 6.8pF 7.5pF 8.2pF 9.1pF 10pF 11pF 12pF 15pF 0402 1.0 ± 0.05 0.5 ± 0.05 0.60 max. 0603 1.6 ± 0.1 0.80 ± 0.1 1.00 max. 0.2 ± 0.1 0.12~ 0.51 0.25 ~ 0.71 1GHz 25VDC 0805 2.0 ± 0.1 1.25 ± 0.1 1.30 max. PART NUMBERING SYSTEM NMC-L 0603 NPO 100 J 50 TRP F RoHS Compliant Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Maximum ESR 500MHz 50 & 100VDC Series 0.700Ω max. 0.700Ω max. 0.385Ω max. 0.385Ω max. ® 20 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-L Series STANDARD VALUES AND CASE SIZES (mm) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) Capacitance 18pF 20pF 22pF 27pF 33pF 36pF 39pF 47pF 51pF 56pF 68pF 75pF 82pF 91pF 100pF 110pF 120pF 130pF 150pF 0402 1.0 ± 0.05 0.5 ± 0.05 0.60 max. 0603 1.6 ± 0.1 0.80 ± 0.1 1.00 max. 0805 2.0 ± 0.1 1.25 ± 0.1 1.30 max. 0.2 ± 0.1 0.12~ 0.51 0.25 ~ 0.71 50 & 100VDC Maximum ESR @ 500MHz W 0.385Ω max. H 0.300Ω max. P P L 100% Sn over Ni barrier 0.260Ω max. 0.500Ω max. 0.400Ω max. 0.260Ω max. ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 21 Multilayer Ceramic Chip Capacitors NMC-M Series FEATURES • LOWER ESR - HIGH Q at HIGH FREQUENCY • STABLE NPO CHARACTERISTICS OVER TEMPERATURE AND VOLTAGE • EIA 0402 AND 0603 CASE SIZES • IDEAL FOR WIRELESS DATA AND VOICE COMMUNICATIONS APPLICATIONS WLANs, HIPERLAN, 802.11A, 802.11B, Wi-Fi, BLUETOOTH,TELEMATICS, PCS, LMDS AND CELLULAR SPECIFICATIONS Capacitance Range Capacitance Tolerance Operating Temperature Range Temperature Characteristics Rated Voltage Dissipation Factor insulation Resistance Dielectric Withstanding Voltage NPO 0.1pF ~ 22pF ±0.05pF(A), ±0.075pF(X), ±0.1pF(B), ±0.25pF(C), ±0.5pF(D) ±1%(F), ±2%(G), ±5% (J) -55°C ~ +125°C 0 ± 30PPM/°C 25Vdc, 50Vdc 0.001 max. (1MHz, +25°C) 10,000 Megohms min. @ +25°C 125Vdc for 5 ± 1 seconds RoHS Compliant includes all homogeneous materials *See Part Number System for Details DIMENISONS (mm) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) 0402 1.0 ±0.05 0.5 ± 0.05 0.6 max. 0.10 ~ 0.30 0603 1.6 ±0.15 0.8 ± 0.15 1.0 max. 0.25 ~ 0.60 W H P P L 100% Sn over Ni barrier PART NUMBER SYSTEM NMC-M 0603 NPO 100 J 50 TRP F RoHS Compliant Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series ® 22 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-M Series STANDARD VALUES AND CHARACTERISTICS NIC PART NUMBER NMC-M0402NPO0R1A25TRPF NMC-M0402NPO0R2A25TRPF NMC-M0402NPO0R3A25TRPF NMC-M0402NPO0R4A25TRPF NMC-M0402NPO0R5A25TRPF NMC-M0402NPO0R6X25TRPF NMC-M0402NPO0R7X25TRPF NMC-M0402NPO0R8_25TRPF NMC-M0402NPO0R9_25TRPF NMC-M0402NPO0R0_25TRPF NMC-M0402NPO1R1B25TRPF NMC-M0402NPO1R2B25TRPF NMC-M0402NPO1R3B25TRPF NMC-M0402NPO1R5B25TRPF NMC-M0402NPO1R6B25TRPF NMC-M0402NPO1R8B25TRPF NMC-M0402NPO2R0B25TRPF NMC-M0402NPO2R2B25TRPF NMC-M0402NPO2R4B25TRPF NMC-M0402NPO2R7B25TRPF NMC-M0402NPO3R0B25TRPF NMC-M0402NPO3R3C25TRPF NMC-M0402NPO3R9C25TRPF NMC-M0402NPO4R7C25TRPF NMC-M0402NPO5R6C25TRPF NMC-M0402NPO6R8C25TRPF NMC-M0402NPO8R2C25TRPF NMC-M0402NPO100C25TRPF NMC-M0402NPO120J25TRPF NMC-M0402NPO150J25TRPF CAPACITANCE VALUE (pF) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 AVAILABLE TOLERANCE A A A A A X X A, X A, X A, B B B B B B B B B B B B C C C C C C C J J Q FACTOR (MIN. @ 1GHz) 500 500 500 500 500 500 500 500 500 350 350 350 350 350 350 350 250 250 250 250 250 200 180 150 120 100 80 80 60 40 ESR Ω (@ 1GHz)* 3.183 1.592 1.061 0.796 0.637 0.531 0.455 0.398 0.354 0.455 0.413 0.379 0.350 0.303 0.284 0.253 0.318 0.289 0.265 0.236 0.212 0.241 0.227 0.226 0.237 0.234 0.243 0.199 0.211 0.265 *Typical ESR ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 23 Multilayer Ceramic Chip Capacitors NMC-M Series STANDARD VALUES AND CHARACTERISTICS NIC PART NUMBER NMC-M0603NPO0R4_50TRPF NMC-M0603NPO0R5_50TRPF NMC-M0603NPO0R6_50TRPF NMC-M0603NPO0R7_50TRPF NMC-M0603NPO0R8_50TRPF NMC-M0603NPO0R9_50TRPF NMC-M0603NPO1R0_50TRPF NMC-M0603NPO1R1_50TRPF NMC-M0603NPO1R2_50TRPF NMC-M0603NPO1R5_50TRPF NMC-M0603NPO1R8_50TRPF NMC-M0603NPO2R0_50TRPF NMC-M0603NPO2R2_50TRPF NMC-M0603NPO2R4_50TRPF NMC-M0603NPO2R7_50TRPF NMC-M0603NPO3R0_50TRPF NMC-M0603NPO3R6_50TRPF NMC-M0603NPO3R6_50TRPF NMC-M0603NPO4R3_50TRPF NMC-M0603NPO4R7_50TRPF NMC-M0603NPO5R1_50TRPF NMC-M0603NPO5R6_50TRPF NMC-M0603NPO6R2_50TRPF NMC-M0603NPO6R8_50TRPF NMC-M0603NPO7R5_50TRPF NMC-M0603NPO8R2_50TRPF NMC-M0603NPO9R1_50TRPF NMC-M0603NPO100_50TRPF NMC-M0603NPO120_50TRPF NMC-M0603NPO150_50TRPF NMC-M0603NPO180_50TRPF NMC-M0603NPO200_50TRPF NMC-M0603NPO220_50TRPF CAPACITANCE VALUE (pF) 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.5 1.8 2.0 2.2 2.4 2.7 3.0 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 12 15 18 20 22 AVAILABLE TOLERANCE A, B A, B A, B A, B A, B A, B A, B A, B A, B A, B A, B A, B B, C B, C B, C B, C B, C B, C B, C B, C C, D C, D C, D C, D C, D C, D C, D F, G, J F, G, J F, G, J F, G, J F, G, J F, G, J Q FACTOR (MIN. @ 1GHz) 300 300 300 300 300 300 300 300 250 250 200 200 100 100 100 100 100 100 100 100 80 80 80 80 80 80 80 80 70 60 50 30 30 ESR Ω (@ 1GHz)* 1.326 1.061 0.884 0.757 0.663 0.589 0.530 0.482 0.530 0.424 0.442 0.397 0.723 0.663 0.589 0.530 0.442 0.408 0.370 0.338 0.390 0.355 0.320 0.292 0.265 0.242 0.218 0.198 0.189 0.176 0.176 0.265 0.241 *Typical ESR ® 24 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors FEATURES • HIGH VOLTAGE 200Vdc ~ 3KVdc • NPO AND X7R DIELECTRICS • 0603, 0805, 1206, 1210, 1808 AND 1812 SIZES • NICKEL BARRIER TERMINATION AND EXCELLENT MECHANICAL STRENGTH SPECIFICATIONS Operating Temperature Range Temperature Characteristic Dissipation Factor Insulation Resistance Capacitance Range Capacitance Tolerance Rated Voltage Dielectric Withstanding Voltage Test Conditions (C & DF) NMC-H Series RoHS Compliant includes all homogeneous materials *See Part Number System for Details NPO X7R -55°C ~ +125°C -55°C ~ +125°C ±30ppm ±15% < 0.1% < 2.5% > 500MegΩ or 500MegΩ-μF whichever is less Test Method: Voltage rating < 500V measured after 1 minute at rated voltage, Voltage rating > 500V measured after 1 minute at 500V 0.22pF ~ 0.0056μF 150pF ~ 0.47μF ±0.1pF(B), ±0.25pF(C), ±0.5pF(D) ±5%(J), ±10%(K), ±20(M) ±1%(F), ±2%(G), ±5%(J), ±10%(K), ±20(M) 250Vdc ~ 3KVdc Working Voltage 200 & 250Vdc x 1.5 + 100Vdc for 5 seconds Working Voltage 500Vdc x 1.5 for 5 seconds Working Voltage greater than 500Vdc x 1.2 for 5 seconds C < 1000pF = 1MHz, 1Vrms @ 25°C 1KHz, 1Vrms @ 25°C C < 1000pF = 1KHz, 1Vrms @ 25°C PART NUMBER SYSTEM NMC-H 1210 NPO 102 J 1KV TRP or TRPLP F RoHS compliant Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series CONSTRUCTION W H P P L 100% Sn over Ni barrier ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 25 Multilayer Ceramic Chip Capacitors NMC-H NPO Series NPO-HIGH VOLTAGE SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) Capacitance 0603 1.6 ± 0.10 0.80 ± 0.10 0.90 max. 0.25 ~ 0.65 200 250 0805 2.0 ± 0.15 1.25 ± 0.10 1.45 max. 0.25 ~ 0.75 200 250 500 200 1206 3.2 ± 0.15 1.6 ± 0.20 1.80 max. 0.25 ~ 0.80 Working Voltage (Vdc) 250 500 1KV 1210 3.2 ± 0.30 2.5 ± 0.20 2.60 max. 0.25 ~ 1.00 2KV 200 250 500 1KV 2KV 0.22pF ~ 8.2pF 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 0.001μF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0068 0.0082 0.01 ® 26 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-H NPO Series NPO-HIGH VOLTAGE SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) Capacitance 1808 4.6 ± 0.40 2.0 ± 0.30 2.20 max. 0.25 ~ 0.75 1812 1825 4.6 ± 0.30 4.6 ± 0.30 3.2 ± 0.30 6.35 ± 0.40 3.00 max. 3.00 max. 0.25 ~ 0.75 0.3 ~ 1.05 Working Voltage (Vdc) 200 250 500 1KV 2KV 3KV 200 250 500 1KV 2KV 3KV 250 500 1K 2K 2220 5.7 ±0.40 5.00 ± 0.40 3.00 max. 0.30 ~ 1.10 2225 5.70 ± 0,40 6.35 ± 0.40 3.00 max. 0.30 ~ 1.10 1K 250 500 1K 0.22pF ~ 8.2pF 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 0.001μF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 27 Multilayer Ceramic Chip Capacitors NMC-H X7R Series X7R-HIGH VOLTAGE SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) Capacitance 0805 2.0 ± 0.1 1.25 ± 0.1 1.45 max. 0.25 ~ 0.75 200 250 500 200 250 1206 3.2 ± 0.15 1.6 ± 0.15 1.80 max. 0.25 ~ 0.75 Working Voltage (Vdc) 500 1KV 2KV 2.5KV 1210 3.2 ± 0.2 2.5 ± 0.2 2.20 max. 0.25 ~ 0.75 200 250 500 1KV 2KV 150 180 220 270 330 390 470 560 680 820 0.001μF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 ® 28 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-H X7R Series X7R-HIGH VOLTAGE SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) Capacitance 1808 4.6 ± 0.4 2.0 ± 0.3 2.20 max. 0.30 min. 1812 1825 4.6 ± 0.4 4.6 ± 0.30 3.2 ± 0.3 6.35 ± 0.40 2.20 max. 3.00 max. 0.30 min. 0.3 ~ 1.05 Working Voltage (Vdc) 200 250 500 1KV 2KV 3KV 200 250 500 1KV 2KV 3KV 250 500 1K 2220 5.7 ±0.40 5.00 ± 0.40 3.00 max. 0.30 ~ 1.10 250 500 1K 2225 5.70 ± 0,40 6.35 ± 0.40 3.00 max. 0.30 ~ 1.10 250 500 1K 150 180 220 270 330 390 470 560 680 820 0.001μF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.5 2.2 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 29 Multilayer Ceramic Chip Capacitors FEATURES • UL X1/Y2 SAFETY CAPACITORS • NPO & X7R DIELECTRICS • FOR ACROSS THE LINE & LINE BYPASS SPECIFICATIONS Operating Temperature Range Temperature Characteristics Dissipation Factor Insulation Resistance Capacitance Range Capacitance Tolerance Rated Voltage Impulse Voltage Load Life Load Life 1,000 hours at 125°C (X1 @ 312.5Vac, Y2 @ 425Vac) Dielectric Withstanding Voltage 30 NPO 1808 RoHS Compliant includes all homogeneous materials *See Part Number System for Details NPO -55°C ~ +125°C C<10pF ±150ppm C>10pF ±30ppm C<10pF Tanδ <0.4% C>10pF Tanδ <0.1% 100,000MegΩ or 1,000MegΩ/μF whichever is less After 1 minute at 500Vdc 2.0pF ~ 430pF ±5% (J) 250Vac 5KVdc No visible damage after 24 ±2 hours ΔC/C ±10% or 1pF, whichever is greater Tanδ < 2 x specified value IR > 1,000MegΩ X = 2,000Vac Y = 2,000Vac for 1 minute; 50mA max. AVAILABLE VALUES (NPO) AND THICKNESS DIMENSIONS (T in mm) Capacitance Value 2pF 2.2 2.7 3.3 3.9 4.7 5.0 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 240 270 330 390 430 ® NMC-H Series 1812 N/A 1.60 ± 0.2mm 1.6 ± 0.2mm X7R -55°C ~ +125°C ±15% ±2.5% @ 1Vrms/1KHz 100,000MegΩ or 500MegΩ/μF whichever is less After 1 minute at 500Vdc 150pF ~ 1,500pF ±10% (K) 250Vac 5KVdc No visible damage after 24 ±2 hours ΔC/C ±15% or ???pF, whichever is greater Tanδ < 7% IR > 2,000MegΩ X = 2,000Vac Y = 2,000Vac for 1 minute; 50mA max. AVAILABLE VALUES (X7R) AND THICKNESS DIMENSIONS (T in mm) Capacitance Value 150pF 180 220 270 330 390 470 560 680 820 1000 1200 1500 1808 SAFETY APPROVALS 1812 Agency UL Standard 1414 1.6 ± 0.20 1.6 ± 0.20 CERTIFICATE 2.0 ± 0.20 2.0 ± 0.20 PART NUMBER SYSTEM NMC-H 1808 NPO 330 J 5KV X1Y2 TRPLP F RoHS Compliant Tape & Reel (Plastic carrier) Safety Classification Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic (NPO or X7R) Size Code (see chart) Series 2.0 ± 0.2mm 2.0 ± 0.2mm NIC COMPONENTS CORP. N/A www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors FEATURES • UL &TUV X2/Y3 SAFETY CAPACITORS • NPO AND X7R DIELECTRICS • FOR ACROSS THE LINE AND LINE BYPASS SPECIFICATIONS Operating Temperature Range Temperature Characteristics Dissipation Factor Insulation Resistance Capacitance Range Capacitance Tolerance Rated Voltage Load Life Load Life 1,000 hours at 125°C (X2 @ 312.5Vac, Y3 @ 425Vac) includes all homogeneous materials *See Part Number System for Details No visible damage after 24 ± 2 hours ΔC/C ±10% or 1pF, whichever is greater, DF < 200%, IR > 1,000MegΩ No visible damage after 48 ± 4 hours ΔC/C ±15%, DF < 7%, IR > 2,000MegΩ X = 1,075Vac Y = 1,500Vac for 1 minute; 50mA max. AVAILABLE VALUES AND THICKNESS DIMENSIONS (T in mm) NPO RoHS Compliant NPO X7R -55°C ~ +125°C -55°C ~ +125°C C<10pF ±150ppm ±15% with 0 VDC Applied C>10pF ±30ppm 0.3% max. @ 1MHz for <1000pF ±2.5% max. @ 1KHz 0.1% max. @ 1KHz for >1000pF 1.0Vrms and 25°C 100,000MegΩ min. or 100,000MegΩ or 1,000MegΩ/μF whichever is less 500MegΩ/μF whichever is less (+25°C after 1 minute at 500VDC) (+25°C after 1 minute at 500VDC) 5pF ~ 330pF 150pF ~ 1,500pF ±5% (J) ±10% (K) ±10% (K) 3KVdc/250Vac Dielectric Withstanding Voltage Capacitance Value 5pF 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 470 560 680 820 0.001μF 0.0012 0.0015 NMC-H Series X7R SAFETY APPROVALS Agency UL TUV Standard 1414 EN132400 CERTIFICATE CERTIFICATE PART NUMBER SYSTEM NMC-H 1808 NPO 330 J 3KV X2Y3 TRPLP F Pb-free/RoHS Compliant Tape & Reel (Plastic carrier) Safety Classification Voltage (Vdc) Capacitance Tolerance Code: J=5%, K=10% Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic: NPO or X7R (see specifications table) Size Code (see chart) 1.60 ± 0.2 Series CASE DIMENSIONS (mm) 2.00 ± 0.2 1.60 ± 0.2 EIA Code L W P G 1808 4.8 ± 0.30 2.0 ± 0.30 0.30 min. 3.2 min. QUANTITY PER REEL (T) 2.00 ± 0.2 Part Thickness Quantity 1.6 ± 0.2 2,000 2.0 ± 0.2 1,000 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 31 Multilayer Ceramic Chip Capacitors NMC-H Series CASE DIMENSIONS (mm) EIA Code L W P G 1808 4.8 ± 0.30 2.0 ± 0.30 0.30 min. 3.2 min. 1812 4.8 ± 0.30 3.2 ± 0.30 0.30 min. 3.2 min. W H QUANTITY PER REEL (T) Quantity Part Thickness 1808 1812 1.6 ± 0.2 2,000 1,000 2.0 ± 0.2 2,000 1,000 G P P L 100% Sn over Ni barrier EMBOSSED PLASTIC CARRIER DIMENSIONS (mm) A B 2.50 ±0.30 4.90 ±0.30 W 1812 3.60 ±0.30 4.90 ±0.30 12.00 ±0.20 F 3.50 ±0.05 E P1 P2 P3 φDo K 1.75 ±0.10 4.00 ±0.10 2.00 ±0.05 4.00 ±0.05 1.50 ±0.10 2.6 max. 8.00 ±0.10 E Type 1808 P3 D0 W F P2 B REEL DIMENSIONS (mm) Type A B C D W 1808 180 +0/-3.0 62 ±1.5 13 ±0.5 20 ±0.5 8.4 +1.5/-0 1812 A P1 K W C D B W A ® 32 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NCA Series FEATURES • STANDARD EIA 1206 & 0805 PACKAGING • EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS • AVAILABLE IN A WIDE RANGE OF VALUES AND TEMPERATURE ..COEFFICIENTS SPECIFICATIONS OPERATING TEMPERATURE CAPACITANCE RANGE VOLTAGE RANGE CAPACITANCE TOLERANCE TEMPERATURE CHARACTERISTICS DIELECTRIC WITHSTANDING VOLTAGE INSULATION RESISTANCE (after 1 minute) DISSIPATION FACTOR NPO X7R Y5V -55°C~ +125°C -55°C~ +125°C -30°C~ +85°C 10pF ~ 1000pF 100pF ~ 0.1μF SEE VALUES TABLES 0.01μF ~ 0.33μF ±5% (J) ±10%(K), ±20%(M) +80%/-20% (Z) 0±30ppm ±15% +30% ~ -80% RoHS Compliant includes all homogeneous materials *See Part Number System for Details 2.5 x Rated Voltage for 1 minute >100GΩ >10GΩ >10GΩ < 0.1% < 5% < 7% STANDARD VALUES AND VOLTAGES PART DIMENSIONS (mm) Cap. 16 10pF ‡ 22pF ‡ 33pF ‡ 47pF ‡ 68pF ‡ 82pF ‡ 100pF ¤‡ 220pF ¤‡ 330pF ‡ 470pF ‡ 680pF ‡ 820pF ‡ .001μF ‡ .0022μF .0033μF .0047μF .0068μF .0082μF .01μF .022μF .033μF .047μF .068μF .082μF 0.1μF 0805 Values 25 ¤‡ ¤‡ ¤‡ ¤‡ ¤‡ ¤‡ ¤‡ ‡ ‡ ‡ ‡ ‡ ‡ ¤ X7R Y5V Working Voltage (Vdc) 50 100 10 16 25 50 100 16 25 50 ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤ ¤ ‡ ‡ ¤ ¤ ‡ ‡ ¤ ¤ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ¤‡ ¤ ‡ ‡ ¤‡ ¤ ‡ ‡ ¤‡ ¤ ‡ ‡ ¤‡ ‡ ‡ ‡ ¤ ¤‡ ‡ ‡ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ¤* ‡ ‡ ‡ 1206 Values ‡ Series L W H S T B NPO NCA0805 2.00 ± 0.20 1.25 ± 0.20 1.00 max. 0.50 ± 0.10 0.28 ± 0.10 0.25 ±0.15 NCA1206 3.20 ± 0.20 1.60 ± 0.20 1.30 max. 0.80 ± 0.20 0.40 ± 0.10 0.30 ± 0.20 L B T W S H Termination: Solder plating over nickel barrier RECOMMENDED LAND PATTERN (mm) Series NCA0805 NCA1206 * X5R TC -55°C ~ +85°C A 1.65 ± 0.10 2.60 ± 0.10 B 0.55 ± 0.05 0.80 ± 0.05 C 0.5 ± 0.05 0.8 ± 0.10 D 0.25 ± 05 0.45 ±0.1 D A B C ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 35 Multilayer Ceramic Chip Capacitors NCA Series PART NUMBER SYSTEM NCA 0805 X7R 103 K 10 TRP F RoHS compliant Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates ecimal for under 10pF Temperature Characteristic Size Code (see chart) Series TAPE DIMENSIONS (mm) A0 B0 F G K P0 P1 P2 T W See note 1 3.50 ±0.05 1.75 ±0.1 2.50 max. 4.0 ±0.1 4.0 ±0.1 2.0 ±0.05 0.6 max. 8.0 ±0.3 Note 1 - These dimensions are deterined by the maximum dimensions of the part. Clearance between the sides of the components shall be 0.05mm (min.) and 0.50mm (max). The clearance shall not allow the component to rotate more than 20° within the carrier cavity. φ1.5±0.1 Po T G P2 F W Bo Ao K REEL DIMENSIONS (mm) P1 E A B C D E W 178 ± 2.0 50 min. 13.0 ± 0.2 20.2 min. 1.5 min. 8.4 ± 1.0 C B D W ® 36 NIC COMPONENTS CORP. A www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Ceramic Disc Capacitors NCD Series Class I TEMPERATURE COMPENSATING AND TEMPERATURE STABLE TYPES (CLASS I) FEATURES • PROVIDES AN ACCURATE, PREDICTABLE LINEAR CAPACITANCE ..CHANGE WITH VARIATIONS IN OPERATING TEMPERATURE RoHS • NPO TYPES PROVIDE DRIFT FREE PERFORMANCE Compliant includes all homogeneous materials • TIGHT TOLERANCES AVAILABLE • AVAILABLE WITH FORMED LEADS AND ON TAPE *See Part Number System for Details SPECIFICATIONS Temperature Characteristics Operating Temperature Range Capacitance Range Standard Tolerance Capacitance Change Over Temperature Range NPO N150 N470 N750 0.5 ~ 470pF 3.0 ~ 220pF 3.0 ~ 150pF ±1% -1 ~ +2% -2% ~ +3% Insulation Resistance Temperature Coefficient Working Voltage Range Dielectric Withstanding Voltage (Test Voltage) Cap. Change Load Life Test @ 85°C Q Factor (min.) 1,000 Hours I.R. (min.) Test Conditions 0±60ppm 22 ~ 470pF 0.5 ~ 1000pF ±5% (J) -5% ~ +7.5% 22 ~ 2200pF 47 ~ 1000pF -5% ~ +9% -10% ~ +20% -13% ~ +12% 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum ±3% ±5% ±8% ±15% ±30% ±50% Shall Confom To Initial Measurements Above 10,000 Megohms <1,000pF; 1MHz, 1.2Vrms Max., >1,000pF; 1KHz, 1.2Vrms Max. A−NPO B−N-150 C−N-330 D−N-750 E−N-1500 F−SL D +5 C B A O NPO J .1LS TR ±50% F RoHS compliant Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) +10 F Opt. LS or LL (in inches) Optional Lead Style C = Cut Lead D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) J = Inside Kink (Long Leads) K = Outward Kink (Long Leads) PERCENT CHANGE FROM 25OC A B C D Temperature Coefficient Working Voltage DC F E TEMPERATURE -55 N3300 1000 (C>30pF) 500 (C>30pF) 400+20C (<30pF) 200+10C (<30pF) Minimum 10,000 Megohms N150±60ppm N470±60ppm N750±120ppm N330±500ppm N1500±250ppm N3300±500ppm 50Vdc ~ 1KVdc NCD 101 J 500 -10 N1500 -30°C ~ +85°C Q Factor (Min. 1MHz) -5 SL -35 -15 +5 +25 +45 +65 +85 ® NIC COMPONENTS CORP. www.niccomp.com Tolerance Code C = ± 0.25pF K = ± 10% D = ± 0.5pF M = ± 20% J = ± 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are significant, third digit is no. of zeros. “R” indicates decimal for under 10pfd. Series www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 41 Ceramic Disc Capacitors Lead Spacing (mm) - S Standard Standard Optional Bulk T&R Bulk 6.35 ± 0.8 5.0 ± 0.8 5.0 ± 0.8 7.5 ± 0.8 6.35 ± 0.8 5.0 ± 0.8 10.0 ± 0.8 Body Diameter 5 ~ 11 >12 NCD Series Class I Standard Low Voltage 500Vdc & Up 100Vdc & Below Optional T&R 2.5 ± 0.8 7.5 ± 0.8 10.0 ± 0.8 2 max. 3 max. 23 min. 23 min. LEAD DIAMETER 0.6MM IS STANDARD BODY THICKNESS 2 ~ 4MM DEPENDENT ON CV S S K Style J Style D Style E Style 5 max. 5 max. 1.5+0.2 1.5+0.2 5 max. 23 min. 23 min. 1.5+0.2 4.7 + 1 5 max. 1.5+0.2 4.7 + 1 S S S S (BULK ONLY) (BULK AND TAPED STYLES) STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE NPO Cap. (pF) 50V 100V 0.5 ~ 18 6 20 6 22 6 27 6 33 6 39 6 47 6 56 7 68 7 75 7 82 7 100 8 120 8 150 9 180 9 220 10 270 12 330 14 470 16 560 680 750 820 1000 - 500V 1KV 6 6 6 6 6 7 7 7 7 7 7 8 8 9 9 10 12 14 16 - 6 6 6 6 7 7 8 8 9 9 9 10 10 12 14 16 16 18 20 - N150 ~ N470 50V 500V 1KV 100V 6 6 7 6 7 8 6 7 8 7 8 9 7 8 9 8 8 10 8 10 6 8 10 12 8 12 14 10 12 14 10 14 10 14 10 14 12/14 14 14 - N750 50V 100V 6 6 6 6 6 7 7 7 7 7 8 8 9 9 10 12 14 16 - SL 500V 1KV 6 6 6 6 6 8 7 7 7 7 8 8 9 9 10 12 14 16 - 6 6 6 7 7 6 8 9 9 9 10 10 12 14 16 16 18 20 - 50V 100V 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 8 8 9 10 10 12 12 14 N1500 500V 1KV 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 8 9 10 12 12 14 16 16 16 6 6 6 6 6 6 6 6 6 7 7 7 7 8 8 9 10 12 14 14 16 16 16 18 50V 100V 6 6 6 6 6 6 6 6 6 6 6 6 6 7 8 8 9 10 10 12 12 14 N3300 500V 1KV 6 6 6 6 6 6 6 6 6 7 7 8 8 9 9 10 12 14 14 16 16 16 6 6 6 6 6 6 6 7 7 7 7 8 8 9 10 12 14 14 16 16 16 18 50V 100V 6 6 6 6 6 7 7 7 7 8 8 8 8 10 500V 1KV 6 6 6 6 6 6 6 6 7 7 7 7 8 9 10 10 10 12 6 6 6 6 6 6 7 7 7 7 8 9 11 11 11 11 13 NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES ® 42 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Ceramic Disc Capacitors NCD Series Class II/III GENERAL PURPOSE, HI-K (DIELECTRIC CONSTANT Class II/III) TYPE FEATURES RoHS • WIDE SELECTION OF TEMPERATURE CHARACTERISTICS Compliant • HIGH INSULATION RESISTANCE includes all homogeneous materials • EXCELLENT HIGH FREQUENCY CHARACTERISTICS *See Part Number System for Details • ECONOMICALLY PRICED • AVAILABLE WITH FORMED LEADS AND ON TAPE FOR AUTOMATIC ..INSERTION SPECIFICATIONS Temperature Characteristics Operating Temperature Range Capacitance Range Standard Tolerance Capacitance Change Over Temperature Range Dissipation Factor Insulation Resistance Working Voltage Range Dielectric Withstanding Voltage (Test Voltage) Cap. Change Load Life Test @ 85°C D.F. (max.) 1,000 Hours I.R. (min.) Test Conditions Y5F Y5P Z5U Z5V -30°C ~ +85°C -30°C ~ +85°C +10°C ~ +85°C +10°C ~ +85°C 100pF ~ 0.01μF ±10% (K) ±7.5% 2.5%* 100pF ~ 0.022μF 0.001μF ~ 0.01μF 0.001μF ~ 0.1μF ±10% (K) ±20% (M) +80%/-20% (Z) ±10% -55% ~ +22 2.5%* 5% Minimum 10,000 Megohms 50Vdc ~ 1KVdc -82% ~ +22% 5% 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum ±10% 4% ±10% ±20% ±30% 4% 7.5% 7.5% 1,000 Megohms 1KHz, 1.0V ±02Vrms 1KHz, 0.5V ± 0.1Vrms * Special low dissipation factor (1.0% max.) Y5F and Y5P dielectrics are also available. Contact NIC for availability. ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 43 Ceramic Disc Capacitors NCD 103 M 50 Z5U J .1LS TR NCD Series Class II/III F RoHS compliant Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) Lead Spacing (mm) - S Standard Standard Optional Bulk T&R Bulk 6.35 ± 0.8 5.0 ± 0.8 5.0 ± 0.8 7.5 ± 0.8 6.35 ± 0.8 5.0 ± 0.8 10.0 ± 0.8 Body Diameter 5 ~ 11 >12 Opt. LS or LL (in inches) Optional Lead Style C = Cut Lead D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) J = Inside Kink (Long Leads) K = Outward Kink (Long Leads) LEAD DIAMETER 0.6MM IS STANDARD Temperature Coefficient Working Voltage DC Tolerance Code C = ± 0.25pF K = ± 10% D = ± 0.5pF M = ± 20% J = ± 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are significant, third digit is no. of zeros. “R” indicates decimal for under 10pfd. Series Optional T&R 2.5 ± 0.8 7.5 ± 0.8 10.0 ± 0.8 BODY THICKNESS 2 ~ 4MM DEPENDENT ON CV Standard Low Voltage 500Vdc & Up 100Vdc & Below 2 max. 3 max. 23 min. 23 min. STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE Y5F/Y5P* Z5U Z5V 50V 50V 50V 500V 1KV 500V 1KV 500V 1KV 100V 100V 100V 100~470pF 6 6 6 560 6 6 6 680 6 6 7 750 6 6 7 820 6 6 7 6 7 7 6 6 6 6 6 0.001μF 0.0015 6 8 8 6 6 7 6 6 0.0022 6 9 10 6 7 7 6 6 6 0.0027 7 10 12 6 7 8 6 6 7 0.0033 7 10 14 6 7 9 6 7 8 0.0047 8 12 14 6 8 10 6 8 8 0.0056 9 14 16 6 9 10 6 8 9 0.0068 9 14 16 7 9 12 6 8 10 0.0082 10 16 18 7 10 12 6 9 10 0.01 12 16 20 7 10 12 6 9 10 0.015 14 21 9 14 16 7 10 12 0.022 10 16 18 8 14 16 0.033 8 18 22 7 16 18 0.047 8 21 24 7 16 21 0.068 8/9 24 8 16 0.1 8/9 26 8/9 17 *.0047μF AND ABOVE NOT AVAILABLE IN Y5F, PLEASE USE Y5P. NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES. S S Cap. (pF/μF) K Style J Style 5 max. 5 max. 1.5+0.2 1.5+0.2 23 min. 23 min. S S (BULK AND TAPED STYLES) D Style E Style 5 max. 1.5+0.2 4.7 + 1 5 max. 1.5+0.2 S 4.7 + 1 S (BULK ONLY) ® 44 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Ceramic Disc Capacitors NCD Series Class III SEMICONDUCTOR TYPE RoHS Compliant FEATURES includes all homogeneous materials • STABLE TEMPERATURE CHARACTERISTICS • HIGH VOLUMETRIC EFFICIENCY *See Part Number System for Details • ECONOMICALLY PRICED • AVAILABLE WITH FORMED LEADS AND ON TAPE FOR AUTOMATIC ..INSERTION SPECIFICATIONS Temperature Characteristics Operating Temperature Range Standard Tolerance Capacitance Change Over Temperature Range Dissipation Factor Insulation Resistance Working Voltage Range Dielectric Withstanding Voltage (Test Voltage) Test Conditions Y5R Y5S Y5T Y5V -30°C ~ +85°C ±20% (M) ±20% ±22% -33% ~ +22 -82% ~ +20% Maximum 8% 12Vdc = 0.004Megohms 16Vdc = 1Megohm 12Vdc ~ 50Vdc 1.25 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum 1KHz, 0.5V ± 0.1Vrms, +25°C PERCENT OF CAPACITANCE CHANGE ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 45 Ceramic Disc Capacitors Body Diameter 5 ~ 11 >12 Lead Spacing (mm) - S Standard Standard Optional Bulk T&R Bulk 6.35 ± 0.8 5.0 ± 0.8 5.0 ± 0.8 7.5 ± 0.8 6.35 ± 0.8 5.0 ± 0.8 10.0 ± 0.8 LEAD DIAMETER 0.6MM IS STANDARD NCD Series Class III Standard Low Voltage 500Vdc & Up 100Vdc & Below Optional T&R 2.5 ± 0.8 7.5 ± 0.8 10.0 ± 0.8 2 max. 3 max. 23 min. 23 min. BODY THICKNESS 2 ~ 4MM DEPENDENT ON CV S S NCD 104 M 16 Y5T J .1LS TR F RoHS compliant Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) Opt. LS or LL (in inches) Optional Lead Style C = Cut Lead D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) J = Inside Kink (Long Leads) K = Outward Kink (Long Leads) K Style J Style 5 max. 5 max. 1.5+0.2 1.5+0.2 23 min. 23 min. Temperature Coefficient Working Voltage DC S S (BULK AND TAPED STYLES) Tolerance Code C = ± 0.25pF K = ± 10% D = ± 0.5pF M = ± 20% J = ± 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are significant, third digit is no. of zeros. “R” indicates decimal for under 10pfd. Series D Style E Style 5 max. 1.5+0.2 4.7 + 1 5 max. 1.5+0.2 S 4.7 + 1 S (BULK ONLY) STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE Cap. (μF) 0.01 0.022 0.033 0.047 0.068 0.1 0.22 Y5R/Y5S Y5T Y5V 12Vdc 16Vdc 25Vdc 50Vdc 12Vdc 16Vdc 25Vdc 50Vdc 12Vdc 16Vdc 25Vdc 50Vdc 6 6 6 6 6 6 6 6 5 5 5 5 7 7 7 7 7 7 7 8 6 6 6 6 7 7 7 7 7 7 7 9 6 6 6 7 9 9 9 9 7 7 7 9 6 6 6 7 10 10 10 10 8 8 8 12 7 7 7 7 10 10 10 12 10 10 10 12 7 7 7 8 10 10 10 - NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES ® 46 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Ceramic Disc Capacitors NCD Series High Voltage HIGH VOLTAGE TYPE RoHS Compliant FEATURES • • • • • 2KV, 3KV, 5KV, 10KV, AND 15KV VOLTAGE RATINGS HIGH PERFORMANCE AND RELIABILITY ECONOMICALLY PRICED AVAILABLE WITH FORMED LEADS TAPE PACKAGING OPTION FOR AUTOMATIC INSERTION includes all homogeneous materials *See Part Number System for Details SPECIFICATIONS Temperature Characteristics Operating Temperature Range Capacitance Change Over Temperature Range Dissipation Factor Insulation Resistance Dielectric Withstanding Voltage (Test Voltage) NPO SL N3300 Y5P Z5U -30°C ~ +85°C N330 ± 500ppm 0.1% max. +100°C ~ +85°C -13% ~ ±10% +12% 0.3% max. 2.5% max. Minimum 10,000 Megohms 0±30ppm Z5V +22% ~ -56% +22% ~ -82% 5% max. 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum <1,000pF; 1MHz, 1.2Vrms Max., >1,000pF; 1KHz, 1.2Vrms Max. Test Conditions 1KHz, 1.0V ±0.2Vrms Max. 1KHz, 0.5V ±0.1Vrms Max. TEMPERATURE CHARACTERISTICS: See Class I and Class II Data Sheets Standard LEAD SPACING AND DIAMETER(mm) 500Vdc & Up Voltage Rating 2KVDC 3KVDC 3 max. 5KVDC 23 min. Lead Spacing - S Bulk ±0.8mm (7~10mm Dia.):6.35mm (12~22mm Dia.):9.5mm (7~10mm Dia.):6.35mm (12~22mm Dia.):9.5mm (7~10mm Dia.):6.35mm (12~22mm Dia.):9.5mm Lead Spacing - S Tape & Reel/Tape & Box (7~10mm Dia.):6.35mm (12~22mm Dia.):9.5mm* (7~10mm Dia.):6.35mm (12~22mm Dia.):9.5mm* (7~10mm Dia.):6.35mm (12~22mm Dia.):9.5mm* Lead Diameter ±0.05 0.6mm (7~10mm Dia.):0.6mm (12~22mm Dia.):0.8mm 0.8mm 10KVDC/ 9.5mm 9.5mm* 0.8mm 15KVDC *All values are not available on tape. Consult factory for availability and leadspace options. THICKNESS 5 ~ 7MM DEPENDENT ON CV S (thinner parts available by special order) Voltage Ratings 4KVDC and Higher Have Resin Body Coating. PART NUMBER SYSTEM NCD 682 M 2KV K Style 5 max. 1.5+0.2 4.7 + 1 23 min. S Temperature Coefficient Working Voltage DC S (BULK AND TAPED STYLES) Tolerance Code C = ± 0.25pF K = ± 10% D = ± 0.5pF M = ± 20% J = ± 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are significant, third digit is no. of zeros. “R” indicates decimal for under 10pfd. Series ® NIC COMPONENTS CORP. F K .2LL TR Opt. Lead Length (in inches) Optional Lead Style C = Cut Lead D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) J = Inside Kink (Long Leads) K = Outward Kink (Long Leads) 5 max. 1.5+0.2 Y5P RoHS compliant Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) E Style www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 47 Ceramic Disc Capacitors NCD Series High Voltage STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE Cap. (pf) 1.0 ~1.5 18 ~ 27 33 39 47 68 82 100 120 150 180 220 270 330 470 680 820 1000 1500 2200 3300 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 33,000 2KV 7 8 9 9 10 12 14 14 16 16 18 18 20 22 3KV 8 9 10 10 12 12 14 16 16 18 20 22 22 NPO 5KV 10KV 15KV 2KV 3KV 9 12 14 7 8 12 14 18 7 8 12 16 20 7 8 14 18 22 7 8 14 18 22 7 8 16 8 9 18 8 10 18 9 10 22 9 12 22 10 12 10 14 12 14 14 16 14 18 16 18 18 22 20 22 SL 5KV 10KV 15KV 2KV 8 8 10 8 10 12 9 10 14 9 12 16 9 12 16 10 16 18 12 16 18 12 16 20 7 12 18 22 7 14 18 24 7 16 20 24 7 16 22 7 18 24 7 20 7 22 7 7 8 9 10 12 14 16 18 20 22 Y5P Z5U Z5V 3KV 5KV 10KV 15KV 2KV 3KV 5KV 10KV 15KV 2K 3K 5K 8 8 8 8 8 8 8 8 9 10 12 12 14 16 18 20 22 8 8 8 8 8 8 9 10 12 14 14 16 20 24 26 9 9 9 10 12 12 12 14 16 18 20 22 24 10 10 12 12 12 14 16 18 20 20 22 26 7 8 9 12 12 14 14 16 16 18 20 22 8 8 8 8 8 8 8 8 8 9 10 12 16 16 18 18 20 22 8 8 8 8 8 8 9 9 12 16 16 18 18 20 22 24 8 8 8 9 9 10 12 12 14 16 18 22 9 9 10 10 10 12 14 16 16 20 22 7 7 8 9 10 12 12 14 14 16 16 18 18 22 8 8 9 10 12 12 14 14 16 18 18 20 22 9 10 12 14 16 16 18 18 20 22 24 NOTE: 4KV, 6KV, 8KV, 12KV RATINGS ARE ALSO AVAILABLE. CONTACT NIC FOR MORE INFORMAITON ® 48 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com NCM Series Conformally Coated, Radial Multilayer Ceramic Capacitors FEATURES • FLAME RETARDANT EPOXY COATING • TEMPERATURE COEFFICIENTS NPO, X7R, Z5U • 50, 100 AND 200 VOLTS • AVAILABLE ON TAPE AND REEL 50 TR includes all homogeneous materials *See Part Number System for Details PART NUMBER SYSTEM NCM20 Z5U 104 M RoHS Compliant F RoHS Compliant Tape and Reel Voltage Tolerance Code (see specifications table below) Capacitance code, expressed in pF, first two digits are significant, third digit is no. of zeros. “R” indicates decimal for under 10pF Temperature Coefficient Series, Size Code SPECIFICATIONS Characteristics NPO X7R Z5U Capacitance Range* Capacitance Tolerance (Code) Operating Temperature Range Temperature Characterisitcs Voltage Rating 1pF ~ 0.1µF ±1%(F), ±2%(G), ±5%(J) -55°C to +125°C 0±30ppm/°C 50, 100 & 200 Vdc 0.15% Max. (+25°C and +125°C) for values greater than 30 pF. For values of 30pF and below: Q = 20 x C +400 1.0Vrms 1MHz for values < 1000pF 1KHz for values > 1000pF 100K Megohms or 1000 Megohm -µF Min., Whichever is Less 250% of Rated Voltage 200% of Rated Voltage at +125°C 470pF ~ 4.7µF ±5%(J), ±10%(K), ±20%(M) -55°C to +125°C ±15% (0 Vdc) 50 & 100 Vdc 1000pF ~ 4.7µF ±20%(M), +80%/-20%(Z) +10°C to +85°C +22%/-56% 50 & 100 Vdc 2.5% Max. at 1KHz, 1Vrms Max. 4.0% Max. at 1KHz, 5Vrms Max. 100K Megohms or 1000 Megohm -µF Min., Whichever is Less 250% of Rated Voltage 200% of Rated Voltage at +125°C 10K Megohms or 100 Megohm -µF Min., Whichever is Less 200% of Rated Voltage 150% of Rated Voltage at +85°C Dissipation Factor Insulation Resistance 25°C (Mil- STD-202, Method 302) Dielectric Strength Life Test (1000 hours) ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 51 NCM Series Conformally Coated, Radial Multilayer Ceramic Capacitors SIZE CODE AND AVAILABLE CAPACITANCE RANGE Size Code NCM15 NCM20 NMC21 NCM30 NCM40 NMC50 WVDC NPO X7R Z5U 50 100/200 50 100/200 50 100/200 50 100 50 100 50 100 330pF~1000pF 1pF~680pF 820pF~8200pF 330pF~6800pF 10pF~8200pF 10pF~6800pF 0.01μF~0.027μF 8200pF~0.022μF 0.039μF~0.068μF 0.033μF~0.047μF 0.01μF~0.1μF 0.01μF~0.068μF 470pF~0.022μF 470pF~4700pF 5600pF~0.15μF 0.01μF~0.1μF 1000pF~0.22μF 1000pF~0.1μF 0.33μF~1.0μF 0.15μF~0.47μF 2.2μF~2.7μF 0.39μF~1.0μF 1.0μF~4.7μF 0.33μF~2.2μF 0.01μF~0.082μF 1000pF~0.01μF 0.1μF~0.47μF 0.15μF~0.22μF 0.015μF~0.22μF 0.01μF~0.47μF 0.68μF~3.3μF 0.33μF~1.0μF 1.5μF~2.2μF 1.0μF~4.7μF 1.0μF~2.2μF DIMENSIONS (mm) W max. Width 3.81 5.08 5.08 7.62 10.15 12.70 Size Code NCM15 NCM20 NCM21 NCM30 NMC40 NCM50 H max. Height 3.81 5.08 5.08 7.62 10.15 12.70 T max. Thickness 2.54 3.18 3.18 3.81 3.81 5.08 S ±0.76 Lead Spacing 2.54 2.54 5.08 5.08 5.08 10.16 dφ Lead Diameter 0.5 0.5 0.5 0.5 0.5 0.63 NCM 15, 20, 30, 40, 50 WW max. NCM 21 T max. WW max. T T max. T H max. H H max. H 2.54 2.54 max. max. 31.75 min. 31.75 31.75 min. 1.52 max. 31.75 dφ S S dφ PACKAGING TAPE AND REEL BULK NCM 15 3500 pieces per reel NCM 15, 20, 21 1000 pieces per bag NCM 20 & 21 3000 pieces per reel NCM 30, 40, 50 500 pieces per bag NCM 30 2000 pieces per reel NCM 40 2000 pieces per reel *TAPE AND REEL SPECIFICATIONS SUPPLIED ON REQUEST. ® 52 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Axial Multilayer Ceramic Capacitors FEATURES • CONFORMALLY COATED, MINIATURE SIZE • 50, 100, AND 200 Vdc • NPO, X7R, AND Z5U TEMPERATURE COEFFICIENTS • TAPE AND REEL PART NUMBER SYSTEM NCMA20 Z5U 104 M 50 TR NCMA Series RoHS Compliant includes all homogeneous materials *See Part Number System for Details F RoHS Compliant Tape and Reel Voltage Tolerance Code (see specifications table below) Capacitance code, expressed in pF, first two digits are significant, third digit is no. of zeros. “R” indicates decimal for under 10pF Temperature Coefficient Series, Size Code SPECIFICATIONS Characteristics NPO X7R Z5U Capacitance Range* Capacitance Tolerance (Code) Operating Temperature Range Temperature Characterisitcs Voltage Rating 1pF ~ 0.01µF ±1%(F), ±2%(G), ±5%(J) -55°C to +125°C 0±30ppm/°C 50, 100 & 200 Vdc 0.15% Max. (+25°C and +125°C) for values greater than 30 pF. For values of 30pF and below: Q = 20 x C +400 1.0Vrms 1MHz for values < 1000pF 1KHz for values > 1000pF 100K Megohms or 1000 Megohm -µF Min., Whichever is Less 250% of Rated Voltage 200% of Rated Voltage at +125°C 220pF ~ 0.47µF ±5%(J), ±10%(K), ±20%(M) -55°C to +125°C ±15% (0 Vdc) 50, 100 & 200 Vdc 0.01µF ~ 1.0µF ±20%(M), +80%/-20%(Z) +10°C to +85°C +22%/-56% 50 & 100 Vdc 2.5% Max. at 1KHz, 1Vrms Max. 4.0% Max. at 1KHz, 5Vrms Max. 100K Megohms or 1000 Megohm -µF Min., Whichever is Less 250% of Rated Voltage 200% of Rated Voltage at +125°C 10K Megohms or 100 Megohm -µF Min., Whichever is Less 200% of Rated Voltage 150% of Rated Voltage at +85°C Dissipation Factor Insulation Resistance 25°C (Mil- STD-202, Method 302) Dielectric Strength Life Test (1000 hours) SIZE CODE AND AVAILABLE CAPACITANCE RANGE Size Code NCMA10 NCMA11 NMCA20 NCMA30 NCMA40 WVDC 50 100 200 50 100 50 100 50 100 50 100 NPO X7R Z5U 1000pF~1200pF 8200pF~0.047μF 0.068μF~0.22μF 150pF~820pF 560pF~0.015μF 0.01μF~0.047μF 1pF~330pF* 220pF~0.01μF 1800pF~3900pF 0.047μF~0.1μF 0.22μF~0.047μF 1000pF~2700pF 0.018μF~0.039μF 0.1μF 1800pF~3900pF 0.027μF~0.1μF 0.047μF~0.1μF 1000pF~1800pF 8200pF~0.033μF 0.033μF~0.047μF 4700pF~5600pF 0.056μF~0.33μF 0.15μF~1.0μF 1800pF~3900pF 0.022μF~0.1μF 0.068μF~0.33μF 8200pF~0.01μF 0.33μF~0.47μF 4700pF-8200pF 0.12μF~0.18μF 0.15μF~0.47μF *-Selected values, Please contact NIC for availability. ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 53 NCMA Series Conformally Coated, Axial Multilayer Ceramic Capacitors DIMENSIONS (mm) D Diameter 2.54 3.50 2.54 3.81 3.81 Type NCMA10 NCMA11 NCMA20 NCMA30 NCMA40 D max. .483 ± .05mm Lead Length Min 25.4 L Length 4.32 4.32 6.80 7.37 10.16 L max. D1 D2 F TAPE AND REEL C CLASS 1 RS-296 A 5mm ± 0.5mm B* 52.4mm ± 1.5mm C 6.35mm ± 0.4mm E 1.2mm F 1.6mm G 356mm H 76mm I 25.4mm J 84mm K 70mm E A B LEADER TAPE: SPLICING TAPE: MISSING PARTS: 300mm min. Tape Only 0.25% of component count max. No consecutive missing parts H K Optional Design +1.5mm *ALSO AVAILABLE IN 26.0mm –0mm J REEL QUANTITIES NCMA 10 7500 pcs NCMA 11 5000 pcs NCMA 20 5000 pcs NCMA 30 5000 pcs NCMA 40 5000 pcs I G ® 54 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Stacked Film Capacitor Chips NSFC Series FEATURES • STACKED METALLIZED POLYESTER FILM CONSTRUCTION • STANDARD EIA 1206, 1210, 1913 AND 2416 SIZES • EXCELLENT MOISTURE RESISTANCE • STABLE TEMPERATURE, FREQUENCY AND BIAS CHARACTERISTICS • REFLOW SOLDERING APPLICABLE RoHS • TAPE AND REEL PACKAGING Compliant NSWC IS RECOMMENDED FOR NEW DESIGNS includes all homogeneous materials *See Part Number System for Details SPECIFICATIONS Capacitance Range Voltage Ratings* Capacitance Tolerance Temperature Range Dissipation Factor (+20°C) Insulation Resistance (+20°C) 1206 1000pF ~ 0.056μF Dielectric Withstanding Voltage Temperature Characteristic Dielectric Absorption Case Sizes 1210 1913 2416 1000pF ~ 0.056μF 1000pF ~ 0.056μF 1000pF ~ 0.056μF 16Vdc (12Vrms), 50Vdc (40Vrms), 100Vdc (75Vrms) ±5% (J) -55°C ~ +105°C 1.0% max. @ 1KHz 3 Gigohms Minimum 175% of Rated Voltage (5 Seconds) 150% of Rated Voltage (60 Seconds) ±4% ΔC Maximum Over Temperature Range 0.20 ~ 0.30% Typical * -AC Voltage Ratings (Vrms) From 60 hz to 10Khz. Contact NIC For Derating At Higher Frequencies. ENVIRONMENTAL CHARACTERISTICS Life Test At +105°C 1,000 Hours at 125% of Rated Voltage Resistance to Soldering Heat: +260°C Peak for 5 Seconds After 90 Seconds at +155°C Humidity Load Life*: (1) 1,000 Hours, +40°C (2) 500 Hours, +60°C Solderability with 10% Wt Rosin-Methanol Flux Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Within +1%/-6% of Initial Value 1.1% Maximum 1 Gigohm Minimum Within ±5% of Initial Value 1.1% Maximum 1 Gigohm Minimum (1) +8%/-5% (2) ±10% of Initial Value (1) 1.5% Max. (2) 2.0% Max. (1) 100 Megohm Min. (2) 10 Megohm Min. 90% Minimum Coverage After 5 Second Dip Into 235°C Solder Pot * At 90 ~ 95% Relative Humidity and Rated Voltage RECOMMENDED LAND PATTERN RECOMMENDED REFLOW PROFILE Temperature - Deg. C 300 Standard: +240 °C Peak Temperature +250°C Special Order/Select Values (see part numbering system and standard values table) 250 200 C 150 A B Cool Down 100 Time above 220°C 60 sec. max. 50 25 0 Ramp-up 25°C ~ 150°C 90 sec. max. EIA Size 1206 1210 1913 2416 Pre-heat 150°C ~ 180°C 120 sec. max. A 2.2 2.2 2.6 3.8 B 3.8 3.8 6.6 7.8 C 1.4 2.3 3.0 3.8 Time PART NUMBER SYSTEM NSFC 103 J 50 TR B2 N F RoHS Compliant Optional High Temperature Reflow (+250°C)* Size Code Tape & Reel Voltage Tolerance Code: J=±5% Capacitance in pF, 1st two digits are significant, 3rd digit is no. of zeros ® NIC COMPONENTS CORP. Series *Special packaging and handling required. Available on select values. (See standard values tables) www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 55 Stacked Film Capacitor Chips STANDARD VALUES SIZE CODE 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 Voltage (Vdc) 16 50 100 B2 B2 B2 B2 B2 B2 B1 B3 B1 B3 B1 B3 B1 C2 B1 C2 B2 C3 B2 C3 B2 C1 D1* B2 C1 D1* B2 C2 D1* B2 C2 D1* B2 C2 D1* B3 C3 D1* B3 C3 D1* B3 C3 D2* C2 D2* C2 D2* C3 D3* C3 D4* D1* E1* D2* E2* D2* E3* D3* E4* E1* E2* E3* E4* - Case Length Width Height Code L ± 0.2 W H ± 0.2 B1 3.2 1.6 ± 0.2 0.8 B2 3.2 1.6 ± 0.2 1.0 B3 3.2 1.6 ± 0.2 1.4 C1 3.2 2.5 ± 0.2 1.0 C2 3.2 2.5 ± 0.2 1.4 C3 3.2 2.5 ± 0.2 2.0 D1 4.8 3.3 ± 0.3 1.4 D2 4.8 3.3 ± 0.3 2.0 D3 4.8 3.3 ± 0.3 2.4 D4 4.8 3.3 ± 0.3 2.8 E1 6.0 4.1 ± 0.3 1.8 E2 6.0 4.1 ± 0.3 2.0 E3 6.0 4.1 ± 0.3 2.4 E4 6.0 4.1 ± 0.3 2.8 EIA Size 1206 1206 1206 1210 1210 1210 1913 1913 1913 1913 2416 2416 2416 2416 Terminations: Stacked Element 95.5% Sn, 4% Ag and 0.5% Cu over phosphorus copper barrier over copper base H L2 p W p 0.35±0.2 L1 REEL DIMENSIONS (mm)/QUANTITY PER REEL Case D1 ± 2.0 D2 ± 0.8 D3 ± 2.0 W Code B1 B2 178 60.0 9.5 ±0.5 B3 C1, C2, C3 21 D1, E1 D2, E2 330 80.0 14.0 ± 1.5 D3, D4, E3, E4 t± 0.5 1.2 2.0 Qty/ Reel 2,000 3,000 2,000 2,000 3,000 3,000 2,000 t 2.0 ±0.5 13 ±0 .0 .5 *Available in +250°C reflow version. See part number system for details D3φ 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 DIMENSIONS AND CASE CODES (mm) D1φ Cap. μF Code NSFC Series φ D2 EMBOSSED PLASTIC CARRIER 1.5 +0.1 -0 4.0 ±0.1 W F t B Case A B C t W F P Dφ Code ± 0.1 ± 0.1 ± 0.2 ± 0.5 ± 0.3 ± 0.5 ± 0.1 ± 0.2 B1 1.5 B2 1.9 3.5 1.5 0.25 8.0 3.5 4.0 1.0 B3 1.9 C1 1.9 C2 2.8 3.5 1.9 0.25 8.0 3.5 4.0 1.0 C3 2.5 D1 2.0 D2 3.8 5.1 2.6 0.30 12.0 5.5 8.0 1.5 D3 & D4 3.4 E1 2.7 E2 4.6 6.3 2.7 0.30 12.0 5.5 8.0 E3 & E4 3.5 1.75 ±0.1 W TAPE DIMENSIONS (mm) D∅ A P C ® 56 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Stacked Film Capacitor Chips NSWC Series FEATURES NSWC IS • STACKED METALLIZED POLYETHYLENE NAPHTHALATE (PEN) FILM RECOMMENDED • STANDARD EIA 1206, 1210, 1913, 2416, 2820, 3022 AND 3925 SIZES FOR NEW DESIGNS • WIDE TEMPERATURE RANGE UP TO +105OC (16Vdc & 50Vdc) • HIGH HEAT AND MOISTURE RESISTANT RoHS • VERY STABLE TEMPERATURE, FREQUENCY, VOLTAGE, BIAS AND Compliant nDIELECTRIC ABSORPTION CHARACTERISTICS includes all homogeneous materials • REFLOW SOLDERING ONLY • TAPE AND REEL PACKAGING *See Part Number System for Details SPECIFICATIONS Capacitance Range Votage Ratings Capacitance Tolerance Temperature Range Dissipation factor (20°C) Insulation resistance (20°C) Dielectric Withstanding Voltage Temperature Characteristic Dielectric Absorption Case Sizes 1206 1210 1913 2416 2820 3022 3925 0.001 ~ 0.0047μF 0.00561 ~ 0.01μF 0.012 ~ 0.22μF 0.1 ~ 0.47μF 0.18 ~ 0.33μF 0.39 ~ 0.47μF 0.56 ~ 1.0μF 16Vdc, 50Vdc, 100Vdc 16V and 50V ±5% (J), 100V 0.001 ~ 0.01μF 5% (J) only, 0.012 ~ 0.15μF 5% (J) or 10% (K), 0.18 ~ 1.0μF 10% (K) only -55°C ~ +105°C (16Vdc, 50Vdc and 100V 0.012μF ~ 0.01μF) -55°C ~ +125°C (100Vdc, 0.012μF ~ 1.0μF with derating above +85°C) 1.0% max. @ 1KHz 3 Gigohms or 1000Ω/F whichever is lower (16Vdc parts measured at 10Vdc) 150% of Rated Voltage 60 Seconds 175% of Rated Voltage for 5 Seconds (except 100Vdc parts) ±3% ΔC Maximum Over Temperature Range 0.05 ~ 0.10% Typical ENVIRONMENTAL CHARACTERISTICS Life Test At +105°C 1,000 Hours at 125% of Rated Voltage (125°C for 100Vdc, 0.012μF ~ 1.0μF) Resistance to Soldering Heat: +240°C Peak Humidity Load Life (90% ~ 95% RH) (1) 1,000 Hours, +40°C (500 Hours for 100Vdc, 0.012μF ~ 1.0μF) (2) 500 Hours, +60°C Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Solderability with 25% Wt Rosin-Methanol Flux 90% Minimum Coverage After 2.5 Second Dip Into 245°C Solder Pot RECOMMENDED REFLOW PROFILE RECOMMENDED LAND PATTERN (mm) A 1.8 1.8 2.6 3.8 4.5 5.1 7.2 B 3.6 3.6 6.6 7.8 9.0 9.7 11.9 C 1.4 2.3 3.0 3.8 4.6 5.0 5.7 300 Temperature - Deg. C EIA Size 1206 1210 1913 2416 2820 3022 3925 Standard: +240 °C Peak Temperature +250°C Special Order (see part numbering system) 250 200 150 Cool Down 100 Time above 220°C 60 sec. max. 50 25 C Within +1%/-6% of Initial Value 1.1% Maximum 1 Gigohm Minimum or 300Ω/F whichever is lower Within ±5% of Initial Value 1.1% Maximum 1 Gigohm Minimum or 300Ω/F whichever is lower (1) +8%/-5% (2) ±10% of Initial Value (1) 1.5% Max. (2) 2.0% Max. (1) 100 Megohm Min. or 30Ω/F (2) 10 Megohm Min. or 3Ω/F whichever is lower 0 Ramp-up 25°C ~ 150°C 90 sec. max. Pre-heat 150°C ~ 180°C 120 sec. max. Time A B ® NIC COMPONENTS CORP. PART NUMBER SYSTEM NSWC 104 J 50 TR D4 N F RoHS Compliant Optional High Temp. Reflow (+250°C)* Size Code Tape & Reel Voltage Tolerance Code: J=±5% Capacitance in pF, 1st two digits are significant, 3rd digit is no. of zeros Series *Special packaging and handling required. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 57 Stacked Film Capacitor Chips NSWC Series DIMENSION (mm) AND CASE CODE STANDARD PRODUCTS AND SIZE CODE Stacked Element Terminations: 95.5% Sn, 4% Ag and 0.5% Cu over phosphorus copper barrier over copper base H p L2 p W L1 Fig. 2 (100V B2~C3) Stacked Element Terminations: 95.5% Sn, 4% Ag and 0.5% Cu over phenolic resin/Ag/Ni/Cu over copper base H p L2 p W L1 EMBOSSED PLASTIC CARRIER 1.5 +0.1 -0 t 4.0 ±0.1 W 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 Case Length Width Height EIA P Code L ±0.2 W H ±0.3 Code B2 1.1 1.6 ± 0.2 0.65 1206 B3 1.5 3.2 ±0.3 C2 1.5 (Fig. 1) 1210 2.5 ± 0.2 C3 2.1 D1 1.4 D2 2.0 4.8 3.3 ± 0.3 1913 D3 2.4 D4 2.8 E1 1.8 E2 2.0 6.0 4.1 ± 0.3 2416 E3 2.4 E4 2.8 0.35 G1 2.0 ±0.2 G2 2.4 (Fig. 2) 2820 7.1 5.0 ± 0.4 G3 2.9 G5 3.5 Q1 3.4 7.7 5.5 ± 0.4 3022 Q2 4.0 R1 3.0 R3 3.6 9.8 6.3 ± 0.4 3925 R6 4.3 R8 5.1 1.75 ±0.1 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Fig. 1 16V & 50V, 100V D1~R8 F Code B Cap. Working Voltage (Vdc) 16 50 100 B2 B2 B2 B2 B2 B2 B3 B3 B3 C2 C2 C3 C3 D1 D1 D1 D1 D1 D1 D1 D2 D2 D2 D2 D3 D3 D4 D4 E1 D1 E1 E3 D2 E2 E4 D2 E3 G1 D3 E4 G2 E1 G3 E2 G5 E3 Q1 E4 Q2 R1 R3 R6 R8 D∅ A P C TAPE DIMENSIONS (mm) 13 ±0 .0 .5 2.0 ±0.5 80 ±1.0 Qty/Reel 3,000 2,000 2,000 2,000 3,000 3,000 2,000 3,000 2,000 1,500 1,000 1,000 330 ±2.0 Case Code A±0.1 B±0.1 C±0.2 t W±0.3 F P±0.1 D+0.2/-0 B2 1.5 1.9 B3 1.9 3.5 0.25 8.0 3.5 4.0 1.0 C2 1.9 2.8 C3 2.5 D1 2.0 D2 3.8 5.1 2.6 1.5 D3, D4 3.4 0.3 5.5 12.0 8.0 ±0.05 ±0.05 E1, E2 2.7 4.6 6.3 E3, E4 3.5 G1 ~ G5 5.5 7.4 4.7 Q1, Q2 6.91 8.43 5.685 0.343 7.5 16.0 12.0 1.5 ±0.1 R1 ~ R8 8.94 10.54 5.795 ±0.013 17.4 ±1.0 .0 21 0.8 ± 13.4 ±1.0 ® 58 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com NSWC Series (High Voltage) Stacked Film Capacitor Chips FEATURES NSWC IS RECOMMENDED • STACKED METALLIZED POLYETHYLENE NAPHTHALATE (PEN) FILM FOR NEW DESIGNS • STANDARD EIA 1913, 2416 and 2420 SIZES • HIGH HEAT AND MOISTURE RESISTANT RoHS • VERY STABLE TEMPERATURE, FREQUENCY, VOLTAGE, BIAS AND Compliant nDIELECTRIC ABSORPTION CHARACTERISTICS includes all homogeneous materials • REFLOW SOLDERING ONLY *See Part Number System for Details • TAPE AND REEL PACKAGING SPECIFICATIONS Case Sizes 2416 0.012 ~ 0.068μF 250Vdc ±5%(J) -55°C ~ +85°C 1.0% max. @ 1KHz 1913 0.001 ~ 0.015μF Capacitance Range Voltage Ratings Capacitance Tolerance Temperature Range Dissipation Factor Insulation Resistance (20°C) Through 2K Ohm Resistor Dielectric Withstanding Voltage Temperature Characteristic Dielectric Absorption 2420 0.027 ~ 0.12μF 3 Gigohms @ 100Vdc 150% of Rated Voltage ±3% ΔC Maximum Over Temperature Range 0.05 ~ 0.10% Typical ENVIRONMENTAL CHARACTERISTICS Life Test At +85°C 1,000 Hours at 125% of Rated Voltage Resistance to Soldering Heat: +240°C Peak Humidity Load Life (90 ~ 95% RH) 1,000 Hours, +40°C Resistance to Soldering Heat 240°C for 5 seconds Solderability with 25% Wt Rosin-Methanol Flux Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Within ±1%/-6% of Initial Value 1.1% Maximum 1 GigΩ Minimum Within ±5% of Initial Value 1.1% Maximum 1 GigΩ Minimum or 300Ω/F whichever is lower (1) +8%/-5% (1) ±1.5% (1) 100MegΩ Within ±5% Maximum 1.1% 1GigΩ 95% Minimum Coverage After 2.5 Second Dip into 245°C Solder Pot RECOMMENDED LAND PATTERN (mm) RECOMMENDED REFLOW PROFILE Temperature - Deg. C 300 Standard: +240 °C Peak Temperature +250°C Special Order (see part numbering system) 250 200 150 EIA Size 1913 2416 2420 A 2.6 3.8 3.8 B 6.6 7.8 7.8 C 3.0 3.8 4.6 Cool Down 100 Time above 220°C 60 sec. max. 50 25 Ramp-up 25°C ~ 150°C 90 sec. max. 0 Pre-heat 150°C ~ 180°C 120 sec. max. Time PART NUMBER SYSTEM NSWC 822 J 250 TR D1 N F RoHS Compliant Optional High Temp. Reflow (+250°C)* Size Code Tape & Reel Voltage Tolerance Code: J=±5% Capacitance in pF, 1st two digits are significant, 3rd digit is no. of zeros ® NIC COMPONENTS CORP. Series www.niccomp.com *Special packaging and handling required. www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 59 NSWC Series High Voltage Stacked Film Capacitor Chips DIMENSION (mm) AND CASE CODE STANDARD PRODUCTS AND SIZE CODE Working Voltage (Vdc) Cap. Code 250 D1 0.001 102 D1 0.0012 122 D1 0.0015 152 D1 0.0022 222 D1 0.0027 272 D1 0.0033 332 D1 0.0039 392 D1 0.0047 472 D1 0.0056 562 D1 0.0068 682 D1 0.0082 822 D1 0.010 103 D1 0.012 123 D1 0.015 153 D2 0.018 183 D2 0.022 223 D3 0.027 273 D4 0.033 333 E2 0.039 393 E3 0.047 473 E4 0.056 563 E5 0.068 683 F2 0.082 823 F4 0.10 104 F5 0.12 124 Fig. 1 Stacked Element Terminations: 95.5% Sn, 4% Ag and 0.5% Cu over phosphorus copper barrier over copper base H L2 p W p L1 Case Length Width Height p Code L±0.2 W H±0.3 D1 1.4 D2 2.0 4.8 3.3 ± 0.3 D3 2.4 D4 2.8 E2 2.0 E3 2.4 6.0 4.1±0.3 0.35 E4 2.8 ±0.2 E5 3.2 F1 3.0 F2 3.2 F3 6.0 5.0 ± 0.4 3.6 F4 3.8 F5 4.5 EIA Code 1913 2416 2420 TAPE DIMENSIONS (mm) Case Code A±0.1 B±0.1 C±0.2 D1 2.0 D2 3.8 5.1 2.6 D3, D4 3.4 E1, E2 2.7 4.6 6.3 E3, E4 3.5 F1 ~ F5 6.3 5.5 4.7 t W±0.3 F 12.0 5.5 ±0.05 P±0.1 D+0.2/-0 1.5 0.3 ±0.05 8.0 - Qty/Reel 3,000 3,000 2,000 3,000 2,000 1,500 4.0 ±0.1 13 ±0 .0 .5 2.0 ±0.5 B W F 330 ±2.0 1.5 +0.1 -0 t 80 ±1.0 EMBOSSED PLASTIC CARRIER 1.75 ±0.1 17.4 ±1.0 .0 21 0.8 ± D∅ A P C 13.4 ±1.0 ® 60 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Stacked Film Capacitor Chips NSPC Series FEATURES • STACKED METALLIZED POLYPHENYLENE SULFIDE (PPS) FILM NSHC IS RECOMMENDED • STANDARD EIA 0805, 1206, 1210, 1913 AND 2416 SIZES FOR NEW DESIGNS • WIDE TEMPERATURE RANGE (-55O +125OC) • HIGH HEAT AND MOISTURE RESISTANT • VERY STABLE TEMPERATURE, FREQUENCY, VOLTAGE, BIAS AND RoHS nDIELECTRIC ABSORPTION CHARACTERISTICS Compliant includes all homogeneous materials • REFLOW & FLOW SOLDERING APPLICABLE • TAPE AND REEL PACKAGING *See Part Number System for Details SPECIFICATIONS Capacitance Range Voltage Ratings* Capacitance Tolerance Temperature Range Dissipation Factor (20°C) Insulation Resistance (20°C) 0805 100pF ~ .01μF Dielectric Withstanding Voltage Temperature Characteristic Dielectric Absorption Case Sizes 1206 1210 1913 3300pF ~ .047μF .015μF ~ .1μF .047μF ~ .1μF 16Vdc (12Vrms), 50Vdc (40Vrms) ±5% Std, ±2% Opt. -55°C ~ +125°C 0.6% max. @ 1KHz 3 Gigohms Minimum 150% of Rated Voltage 60 Seconds 175% of Rated Voltage for 5 Seconds ±3% ΔC Maximum Over Temperature Range 0.05 ~ 0.10% Typical 2416 .12μF ~ .22μF * -AC Voltage Ratings (Vrms) From 60 hz to 30Khz. Contact NIC For Derating At Higher Frequencies. ENVIRONMENTAL CHARACTERISTICS Life Test At +125°C 1,000 Hours at 125% of Rated Voltage Resistance to Soldering Heat +260°C Peak Humidity Load Life (Note 1): (1) 1000 Hours, +40°C (2) 500 Hours, +60°C Solderability with 25% Wt Rosin-Methanol Flux Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Within ±2% of Initial Value 0.66% Maximum 1 Gigohm Minimum Within ±3% of Initial Value 0.66% Maximum 1 Gigohm Minimum Within ±2% of Initial value 0.90% Maximum (1) 1 Gigohm Minimum (2) 0.5 Gigohm Minimum 90% Minimum Coverage After 2.5 Second Dip into 255°C Solder Pot NOTE 1: At 90 ~ 95% Relative Humidity and Rated Voltage PART NUMBER SYSTEM NSPC 103 J 16 TR A2 F RoHS Compliant Size Code Tape & Reel Voltage Tolerance Code: J=±5%, G=±2% Capacitance in pF, 1st two digits are significant, 3rd digit is no. of zeros Series ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 61 Stacked Film Capacitor Chips NSPC Series STANDARD PRODUCTS AND SIZE CODE Code 100pF 120 150 180 220 270 330 390 470 560 680 820 0.001 0.0012 0.0015 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 Working Voltage (Vdc) 16 50 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 B1 A1 B1 A1 B1 A1 B1 A1 B1 A2 B2 A2 B2 B1 C1 B1 C1 B1 C2 B1 C2 B2 C2 B2 C3 B3 C3 B3 D1 C2 D1 C2 D1 C3 D2 C3 D2 E1 E3 E4 E5 Stacked Element Terminations: 95.5% Sn, 4% Ag and 0.5% Cu over phosphorus copper barrier over copper base H L2 p W p L1 DIMENSION (mm) AND CASE CODE Case Length Code L ±0.2 A1 2.0 A2 B1 B2 3.2 B3 C1 C2 3.2 C3 D1 4.8 D2 E1 E3 6.0 E4 E5 Width W Height H ±0.2 0.8 1.0 0.8 1.0 1.4 1.0 1.4 2.0 1.4 2.0 1.8 2.4 2.8 3.2 1.25 ± 0.2 1.6 ± 0.2 2.5 ± 0.2 3.3 ± 0.3 4.1 ± 0.3 EIA 0805 1206 1210 1913 2416 RECOMMENDED LAND PATTERN (mm) EIA Size 0805 1206 1210 1913 2416 A 1.0 2.2 2.2 2.6 3.8 B 2.7 3.8 3.8 6.6 7.8 C 1.1 1.4 2.3 3.0 3.8 C Cap. A B RECOMMENDED REFLOW PROFILE Temperature - Deg. C 300 Peak Temperature 260°C 250 200 150 Cool Down 100 Time above 230°C 30 sec. max. 50 25 0 Ramp-up 25°C ~ 150°C 90 sec. max. Pre-heat 150°C ~ 180°C 120 sec. max. Time Solder within 1 year. Storage at +30°C and 60% RH ® 62 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Stacked Film Capacitor Chips FEATURES • STACKED METALLIZED POLYPHENYLENE SULFIDE (PPS) FILM • STANDARD EIA 0603, 0805, 1206, 1210, 1913 AND 2416 SIZES • WIDE TEMPERATURE RANGE UP TO +125OC (100pF ~ 0.1μF) • HIGH HEAT AND MOISTURE RESISTANT • VERY STABLE TEMPERATURE, FREQUENCY, VOLTAGE, BIAS AND nDIELECTRIC ABSORPTION CHARACTERISTICS • SUITABLE FOR REFLOW & FLOW (D1~D4, E1~E5) SOLDERING • TAPE AND REEL PACKAGING NSHC Series NSHC IS RECOMMENDED FOR NEW DESIGNS RoHS Compliant includes all homogeneous materials *See Part Number System for Details SPECIFICATIONS Capacitance Range Voltage Ratings Capacitance Tolerance Temperature Range Dissipation Factor (20°C) Insulation Resistance (20°C) Dielectric Withstanding Voltage Temperature Characteristic Dielectric Absorption Case Sizes 0603 0805 1206 1210 1913 2416 100pF ~ 0.0027μF 100pF ~ .01μF 3300pF ~ .047μF .012μF ~ .1μF .047μF ~ .1μF .12μF ~ .22μF 16Vdc (12Vrms), 50Vdc (40Vrms) ±5% Std, ±2% Opt. -55°C ~ +125°C (0.12μF ~ 0.22μF voltage derated above +105°C) 0.6% max. @ 1KHz 3 Gigohms Minimum 150% of Rated Voltage 60 Seconds 175% of Rated Voltage for 5 Seconds (except 1913 and 2416 case sizes) ±3% ΔC Maximum Over Temperature Range 0.05 ~ 0.10% Typical ENVIRONMENTAL CHARACTERISTICS Life Test At +125°C 1,000 Hours at 125% of Rated Voltage Resistance to Soldering Heat +260°C Peak Humidity Load Life: (1) 1000 Hours, +40°C (2) 500 Hours, +60°C Solderability with 25% Wt Rosin-Methanol Flux Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Within ±2% of Initial Value 0.68% Maximum 1 Gigohm Minimum Within ±3% of Initial Value 0.66% Maximum 1 Gigohm Minimum Within ±2% of Initial value 0.90% Maximum (1) 1 Gigohm Minimum (2) 0.5 Gigohm Minimum 90% Minimum Coverage After 2.5 Second Dip into 255°C Solder Pot RECOMMENDED REFLOW PROFILE Temperature - Deg. C 300 Peak Temperature 260°C 250 200 150 Cool Down 100 Time above 230°C 30 sec. max. 50 25 Ramp-up 25°C ~ 150°C 90 sec. max. 0 RECOMMENDED LAND PATTERN (mm) EIA Size 0603 0805 1206 1210 1913 2416 A 0.6 0.8 1.8 1.8 2.6 3.8 B 2.0 2.4 3.6 3.6 6.6 7.8 C 0.7 1.1 1.4 2.3 3.0 3.8 Pre-heat 150°C ~ 180°C 120 sec. max. C Time Solder within 1 year. Storage at +30°C and 60% RH A B ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 63 Stacked Film Capacitor Chips STANDARD PRODUCTS AND SIZE CODE Working Voltage (Vdc) Cap. Code 16 50 100pF 101 J1 A1 120 121 J1 A1 150 151 J1 A1 180 181 J1 A1 220 221 J1 A1 270 271 J1 A1 330 331 J1 A1 390 391 J1 A1 470 471 J1 A1 560 561 J1 A1 680 681 J1 A1 820 821 J1 A1 0.001 102 J1 A1 0.0012 122 J1 A1 0.0015 152 J1 A1 0.0022 222 J1 A1 0.0027 272 J1 A1 0.0033 332 A1 B1 0.0039 392 A1 B1 0.0047 472 A1 B1 0.0056 562 A1 B1 0.0068 682 A1 B1 0.0082 822 A2 B2 0.010 103 A2 B2 0.012 123 B1 C1 0.015 153 B1 C1 0.018 183 B1 C2 0.022 223 B1 C2 0.027 273 B2 C2 0.033 333 B2 C3 0.039 393 B3 C3 0.047 473 B3 D1 0.056 563 C2 D2 0.068 683 C2 D2 0.082 823 C3 D3 0.10 104 C3 D4 0.12 124 E1 0.15 154 E3 0.18 184 E4 0.22 224 E5 NSHC Series DIMENSION (mm) AND CASE CODE Case Length Code L ±0.2 J1 1.6 A1 2.0 A2 B1 3.2 B2 B3 C1 C2 3.2 C3 D1 D2 4.8 D3 D4 E1 E3 6.0 E4 E5 Width W 0.8 ± 0.15 1.25 ± 0.2 1.6 ± 0.2 2.5 ± 0.2 3.3 ± 0.3 4.1 ± 0.3 Height H ±0.2 0.7 ± 0.15 0.9 1.1 0.9 1.1 1.5 1.1 1.5 2.1 1.4 2.0 2.4 2.8 1.8 2.4 2.8 3.2 p EIA 0.35 ± 0.20 0603 0.45 ± 0.25 0805 1206 0.65 ± 0.35 1210 1913 0.35 ± 0.20 2416 OUTLINE DRAWING (J1 ~ C3 CASE SIZES) Stacked Element Terminations: 95.5% Sn, 4% Ag and 0.5% Cu over phenolic resin/Ag/Ni/Cu over copper base H L2 p p W L1 OUTLINE DRAWING (D1 ~ E5 CASE SIZES) Stacked Element Terminations: 95.5% Sn, 4% Ag and 0.5% Cu over phosphorus copper barrier over copper base H p L2 p W L1 PART NUMBER SYSTEM NSHC 103 J 16 TR A2 F RoHS compliant Size Code Tape & Reel Voltage Tolerance Code: J=±5%, G=±2% Capacitance in pF, 1st two digits are significant, 3rd digit is no. of zeros Series ® 64 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Wound Metalized PPS Film Capacitor Chips FEATURES • WOUND METALLIZED POLYPHENYLENE SULFIDE (PPS) FILM • WIDE TEMPERATURE RANGE UP TO +125OC (with derating above 105°C) • COMPATIBLE WITH SAC REFLOW SOLDERING (+260°C) • VERY STABLE TEMPERATURE, FREQUENCY, VOLTAGE, BIAS AND nDIELECTRIC ABSORPTION CHARACTERISTICS • SUITABLE FOR INVERTOR POWER SUPPLIES FOR LCD BACKLIGHTING • TAPE AND REEL PACKAGING NSMX Series NEW Case Size 5.7mm x 4.5mm x 2.2mm ~ 10.2mm x 7.2mm x 3.1mm Capacitance Range 0.01μF ~ 0.22μF Voltage Ratings 100Vdc (63Vrms up to 40KHz*) Capacitance Tolerance ±5% (J), ±10% (K) Temperature Range -40°C ~ +125°C (voltage derating above +105°C) Dissipation Factor (20°C) 0.15% max. @ 1KHz, 0.25% max. @ 100KHz Insulation Resistance (20°C) 15GΩ minimum @ 100Vdc, 60 seconds (thru 2K ohm resistor) Dielectric Withstanding Voltage 150% of Rated Voltage *Note: Vrms should be limited so that surface temperature rise does not exceed +10°C SPECIFICATIONS RoHS Compliant includes all homogeneous materials *See Part Number System for Details ENVIRONMENTAL CHARACTERISTICS Life Test At +125°C 1,000 Hours at 125% of Rated Voltage Resistance to Soldering Heat +260°C Peak for 5 Seconds Humidity Load Life 500 Hours, +40°C @ 90~95% RH and Rated Voltage Heat Resistance 125°C for 500 Hours Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Solderability with 25% Wt Rosin-Methanol Flux Within ±3% of Initial Value 0.25% max. @ 1KHz, 0.35% max. @ 100KHz 5GΩ minimum @ 100Vdc, 60 seconds Within ±10% of Initial Value 0.25% max. @ 1KHz, 0.35% max. @ 100KHz 10GΩ minimum @ 100Vdc, 60 seconds Within ±5% of Initial value 0.35% max. @ 1KHz, 0.45% max. @ 100KHz 5GΩ minimum @ 100Vdc, 60 seconds Within ±2% of Initial value 0.15% max. @ 1KHz, 0.25% max. @ 100KHz 10GΩ minimum @ 100Vdc, 60 seconds 95% Minimum Coverage After 2~3 Second Dip into 250°C Solder Pot Permissible Voltage (rms) Derating % of Rated Voltage TEMPERATURE DERATING OF WORKING VOLTAGE 105°C 125°C 100 80 70% 60 40 PART NUMBER SYSTEM 20 NSMX 103 J 100 TR F 0 -40 -20 0 20 40 60 80 Temperature °C 100 120 RoHS compliant Tape & Reel Voltage Tolerance Code: J=±5%, K=±10% Capacitance in pF, 1st two digits are significant, 3rd digit is no. of zeros 140 PERMISSIBLE AC VOLTAGE DERATING 100 Series 80 63Vrms 40 30Vrms 20 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 Frequency (KHz) ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 65 Wound Metalized PPS Film Capacitor Chips NSMX Series STANDARD PRODUCTS AND CASE DIMENSIONS (mm) Part Number NSMX103_100TRF NSMX123_100TRF NSMX153_100TRF NSMX183_100TRF NSMX223_100TRF NSMX273_100TRF NSMX333_100TRF NSMX393_100TRF NSMX473_100TRF NSMX563_100TRF NSMX683_100TRF NSMX823_100TRF NSMX104_100TRF NSMX124_100TRF NSMX154_100TRF NSMX184_100TRF NSMX224_100TRF Voltage (Vdc) Cap. (μF) 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 H ± 0.4 2.2 2.2 2.4 1.7 1.8 2.2 2.4 1.7 1.9 2.1 2.3 2.9 3.0 2.9 3.3 2.8 3.1 100 W ± 0.4 4.5 4.6 4.8 5.5 5.4 5.9 6.2 5.4 5.6 5.8 6.0 6.0 6.2 6.2 6.6 6.6 7.2 L ± 0.3 5.7 5.7 5.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 10.2 10.2 Termination: b min. 3.0 3.0 3.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 0.2 100% Sn, over Ni over alloy base H Wound Element p p min. W p b L TAPE AND REEL DIMENSIONS (mm) AND REEL QUANTITIES A B W F P1 P2 T ±0.3 ±0.3 ±0.3 ±0.1 ±0.1 ±0.1 ±0.1 Part Number NSMX103_100TRF NSMX123_100TRF NSMX153_100TRF NSMX183_100TRF NSMX223_100TRF NSMX273_100TRF NSMX333_100TRF NSMX393_100TRF NSMX473_100TRF NSMX563_100TRF NSMX683_100TRF NSMX823_100TRF NSMX104_100TRF NSMX124_100TRF NSMX154_100TRF NSMX184_100TRF NSMX224_100TRF 5.0 6.3 6.0 8.1 6.6 9.1 12.0 5.5* 2.0* Reel Diameter W W1 <3.5 - 330 ± 4.0 14.0 ± 1.5 < 20.5 <4.0 0.3 8.1 <3.0 16.0 6.6 D1 <3.0 8.0 6.0 T2 7.5 <1.5 250 ± 6.0 330 ± 4.0 250 ± 6.0 2,000 17.4 ± 1.0 2.0 9.1 Reel Quantity < 22.4 <4.0 330 ± 4.0 7.4 7.6 8.4 0.4 12.0 10.6 <4.5 0.3 - 1,000 W 4.0 ±0.1 1.5 +0.1 -0 P2 1.75 ±0.1 t 13 ±0 .0 .5 W B F 1.75 ±0.1 B D1 A .8 P1 T2 21 ±0 t ® W1 66 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Wound Metalized PPS Film Capacitor Chips RECOMMENDED REFLOW PROFILE RECOMMENDED LAND PATTERN (mm) A B C 2.0 ~ 2.5 5.0 ~ 5.5 5.3 ~ 5.7 Peak Temperature (260°C for 5 sec. or 250°C for 10 sec.) 300 2.0 ~ 2.5 4.0 ~ 4.5 3.3 ~ 3.7 Temperature - Deg. C Part Number NSMX103_100TRF NSMX123_100TRF NSMX153_100TRF NSMX183_100TRF NSMX223_100TRF NSMX273_100TRF NSMX333_100TRF NSMX393_100TRF NSMX473_100TRF NSMX563_100TRF NSMX683_100TRF NSMX823_100TRF NSMX104_100TRF NSMX124_100TRF NSMX154_100TRF NSMX184_100TRF NSMX224_100TRF NSMX Series 250 200 150 Cool Down 100 Time above 230°C 40 sec. max 50 25 Pre-heat 150°C ~ 180°C 120 sec. max. 0 Time 2.0 ~ 2.5 5.0 ~ 6.0 5.3 ~ 5.7 Cleaning 2.0 ~ 2.5 6.0 ~ 6.5 7.8 ~ 8.2 C B A A • Use Freon-substitute cleaning solvent • Immersion, Ultrasonic or Vapor cleaning • 5 Minutes maximum cleaning • Less than 50°C • Ultrasonic conditions: 42 KHz, 20W max • Please review all other cleaning conditions - techniques with NIC • Contact: [email protected] ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 67 Stacked Film Capacitor Chips NSPU Series FEATURES • STACKED METALLIZED ACRYLIC RESIN FILM (THERMO-CURE TYPE) • STANDARD EIA 0805, 1206 AND 1210 SIZES • HIGH HEAT AND MOISTURE RESISTANT • STABLE TEMPERATURE, FREQUENCY & BIAS CHARACTERISTICS • REFLOW SOLDERING ONLY • TAPE AND REEL PACKAGING NSPU IS RECOMMENDED FOR NEW DESIGNS Case Sizes 1206 1210 Capacitance Range 0.15μF ~ 0.068μF 1.0μF Voltage Ratings 16Vdc Capacitance Tolerance ±20% (M) Temperature Range -40°C ~ +85°C Dissipation Factor (20°C) 1.5% @ 1KHz/25°C Insulation Resistance (20°C) C < 0.33μF = 1000MΩ, C > 0.47μF = 300MΩ/μF @ 10Vdc 175% of Rated Voltage (5 seconds) Dielectric Withstanding Voltage 150% of Rated Voltage (60 seconds) Temperature Characteristic -20% ~ +5% ΔC Maximum Over Temperature Range SPECIFICATIONS 0805 0.1μF RoHS Compliant includes all homogeneous materials *See Part Number System for Details ENVIRONMENTAL CHARACTERISTICS Life Test At +85°C 1,000 Hours at 125% of Rated Voltage Resistance to Soldering Heat Reflow: 240°C Peak Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Within +7% ~ -20% of Initial Value 1.65% Maximum @ 1KHz C < 0.33μF = 300MΩ Min., C > 0.47μF = 100MΩ/μF Within +3% ~ -15% of Initial Value 1.65% Maximum ~ 1KHz C < 0.33μF = 500MΩ Min., C > 0.47μF = 150MΩ/μF 150% of rated voltage for 60 seconds 175% of rated voltage for 5 seconds Within +20%/-3% of Initial value 2.25% Maximum C < 0.33μF = 100MΩ Min., C > 0.47μF = 30MΩ/μF 130% of rated voltage for 60 seconds Withstanding Voltage Humidity Load Life +40°C & 90% ~ 95% RH 500 Hours @ rated voltage Solderability with 25% Wt Rosin-Methanol Flux Capacitance Change Dissipation Factor Insulation Resistance Withstanding Voltage 90% Minimum Coverage After 2.5 Second Dip into 245°C Solder Pot PART NUMBER SYSTEM NSPU 104 M 16 TR A3 F RoHS compliant Size Code Tape & Reel Voltage Tolerance Code: M=±20% Capacitance in pF, 1st two digits are significant, 3rd digit is no. of zeros Series ® 68 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Stacked Film Capacitor Chips NSPU Series STANDARD VALUES AND CASE SIZES (mm) Part Number Capacitance Value NSPU104M16TRA3F NSPU154M16TRB4F NSPU224M16TRB4F NSPU334M16TRB5F NSPU474M16TRB6F NSPU684M16TRB6F NSPU105M16TRC4F 0.1μF 0.15μF 0.22μF 0.33μF 0.47μF 0.68μF 1.0μF Stacked Element Terminations: Dimensions (mm) W ± 0.2 H ± 0.2 1.25 1.0 0.8 0.8 1.6 1.0 1.4 1.4 2.5 1.4 L ± 0.2 2.0 3.2 EIA Size 0805 1206 1206 1206 1206 1206 1210 P 0.45 ± 0.25 0.65 ± 0.30 Reel Qty 3,000 3,000 3,000 3,000 2,000 2,000 2,000 LAND PATTERN DIMENSIONS (mm) 95.5% Sn, 4% Ag and 0.5% Cu over phenolic resin/Ag/Ni/Cu barrier over Cu base. EIA Size 0805 1206 1210 A ± 0.1 1.55 1.9 1.9 B ± 0.1 2.3 3.5 3.5 C ± 0.2 1.3 1.5 1.9 C H L2 p W p RECOMMENDED REFLOW PROFILE A B L1 Temperature - Deg. C 300 Peak Temperature 240°C 250 200 150 Cool Down 100 Time above 220°C 30 sec. max. 50 25 0 Pre-heat 150°C ~ 180°C 120 sec. max. Ramp-up 25°C ~ 150°C 90 sec. max. Time Note: These capacitors are sensitive to moisture. Capacitors should be stored in moisture barrier packaging at +25°C and a relative humidity of <70% (six months maximum). The components should be soldered within 72 hours of breaking the moisture barrier packaging seal and stored during those 72 hours at <+25°C and <70% relative humidity. If the parts are to be storage outside of the moisture barrier packaging the conditions should be <+20°C and relative humidity of less then 50%. TAPE AND REEL DIMENSIONS (mm) Case Code A3 B4, B5 B6 C4 A ± 0.1 1.55 1.9 1.9 2.8 B ± 0.1 2.3 3.5 3.5 3.5 C ± 0.2 1.3 1.5 1.9 1.9 W ± 0.3 F ± 0.05 P ± 0.1 D +0.2/-0 0.25 8.0 3.5 4.0 1.0 2.0 +/- 0.5 REEL 13 .0 t ± 0.05 4.0 ±0.1 P1 1.5 +0.1 -0 +/ − 0. 5 1.75 ±0.1 t 2.0 +/− 0.5 F D1 D3 W B Do D2 t A P ® C W NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 69 Polyester Film Capacitors NEM Series EPOXY COATED, INDUCTIVE, FILM CAPACITORS, RADIAL LEADS RoHS Compliant FEATURES includes all homogeneous materials • MULTIPLE COATS OF EPOXY *See Part Number System for Details • INDUCTIVE CONSTRUCTION FOR MANY CONSUMER AND INSTRUMENT APPLICATIONS • SUBMINIATURE, UNIFORM SIZING • ECONOMICALLY PRICED • OPTIONAL TAPING FOR AUTOMATIC INSERTION • LEAD FORMING AND CUTTING AVAILABLE ON SPECIAL ORDER SPECIFICATIONS PART NUMBER SYSTEM Operating Temperature Rated Voltage (VDC) Capacitance Range Capacitance Tolerance Insulation Resistance Dissipation Factor Dielectric Strength -40°C ~ +85°C 100V (200V on Special Order) 0.001μF ~ 0.47μF ±10% (K), ±5% (J) 50,000 Megohm Min. <0.0075 (at 1KHz) 250% of Rated Voltage for 5 Seconds NEM 104 K 100 F2 TB RoHS compliant TB = Tape & Box TR = Tape & Reel (Optional) Special Lead Configuration Voltage (DC) Tolerance Code: J = ± 5%, K = ± 10% Capacitance Code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = 0.001pF, 103 = 0.01μF, 104 = 0.1μF Series L max. T max. STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Voltage Case (μF) 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 L 5.5 5.5 5.5 6.0 6.5 6.5 6.5 7.0 7.5 8.5 9.5 10.0 11.0 12.5 13.5 16.0 18.0 100VDC/63VAC T H 3.5 12.5 3.5 12.5 3.5 12.5 3.5 12.0 3.5 12.0 3.5 12.0 4.0 12.0 4.0 12.5 4.0 12.5 4.5 12.5 5.0 12.5 5.5 13.0 6.5 13.0 7.5 15.0 8.5 16.0 9.0 19.0 10.0 20.0 S 3.5 3.5 3.5 4.0 4.0 4.0 4.0 4.5 6.0 6.0 6.0 6.0 6.5 7.0 7.5 10.0 10.0 F H max. d∅ : 0.5mm 20 mm min. S (1.55mm max. epoxy coating rundown onto leads) S ±1.0mm for Lead spacing ≤ 6mm. S ±1.5mm for Lead spacing > 6mm. NOTE: OTHER VALUES AVAILABLE ON SPECIAL ORDER SPECIAL LEAD FORMING AVAILABLE, PLEASE CONSULT FACTORY ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 75 Polyester Film Capacitors NRP Series EPOXY COATED, NON-INDUCTIVE, EXTENDED FOIL FILM CAPACITORS, RADIAL LEAD FEATURES • • • • • RoHS Compliant EXTENDED FOIL, NON-INDUCTIVE CONSTRUCTION LOW DISSIPATION FACTOR EXCELLENT MOISTURE RESISTANCE HIGH INSULATION RESISTANCE SMALL SIZE AND ECONOMICALLY PRICED includes all homogeneous materials *See Part Number System for Details SPECIFICATIONS Operating Temperature Rated Voltage (VDC) Capacitance Range Capacitance Tolerance Insulation Resistance Dissipation Factor Dielectric Strength PART NUMBER SYSTEM -40°C ~ +85°C 50V, 100V, 200V, 400V, 600V 0.001μF ~ 0.47μF ±10% (K), ±5% (J) 50,000 Megohm Min. <0.0075 (at 1KHz) 250% of Rated Voltage for 5 Seconds NRP K 100 F2 F RoHS compliant Special Lead Forming Voltage (VDC) Tolerance Code J = ±5%, K = ±10% Series T L 102 Capacitance code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF LEAD SPACING AND DIAMETER (mm) L S dφ H *2mm max. L > 20mm 1.5mm max. L < 20mm 10 7.5 0.6 13.0 10.0 0.6 18.0 15.0 0.8 26.0 22.5 0.8 31.0 27.5 0.8 LL = 25mm min. dφ SPECIAL LEAD FORMING AVAILABLE, PLEASE CONSULT FACTORY S ± 1mm STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Cap. (μF) 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 50VDC/30VAC L T H 10.0 5.0 9.0 10.0 5.0 9.0 10.0 5.0 9.0 10.0 5.0 9.0 10.0 5.0 9.0 10.0 5.0 9.0 10.0 5.0 9.0 10.0 5.5 9.0 * 5.5 10.0 13.0 6.0 10.0 13.0 6.5 10.5 13.0 7.0 11.5 15.0 7.5 12.5 19.0 8.0 15.0 26.0 8.0 15.0 26.0 10.0 16.5 26.0 12.5 18.5 100VDC/63VAC L T H * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.5 9.5 * 6.0 10.0 13.0 6.0 10.5 13.0 6.5 11.0 13.0 7.0 12.0 15.0 7.5 12.5 19.0 8.0 15.0 26.0 7.5 15.0 26.0 10.0 16.5 26.0 10.0 17.5 Working Voltage 200VDC/63VAC L T H * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.0 9.0 * 5.5 9.5 13.0 6.0 10.0 13.0 6.5 10.5 19.0 7.0 11.0 19.0 7.5 11.5 19.0 8.0 13.0 19.0 9.0 16.0 26.0 9.0 16.5 31.0 10.0 18.5 31.0 12.5 22.0 400VDC/200VAC L T H 13.0 5.5 9.5 13.0 5.5 9.5 13.0 5.5 9.5 13.0 5.5 9.5 13.0 6.0 10.0 13.0 6.5 10.0 13.0 7.0 11.0 13.0 7.5 11.5 19.0 8.0 11.5 19.0 8.5 14.0 19.0 9.5 15.5 26.0 9.0 15.5 26.0 10.5 17.5 31.0 11.0 19.0 31.0 13.0 22.0 - 600VDC/200VAC L T H 13.0 5.5 9.5 13.0 5.5 9.5 13.0 5.5 9.5 13.0 6.5 9.5 13.0 7.5 11.5 13.0 8.0 13.0 19.0 8.5 11.5 19.0 9.0 15.0 19.0 9.5 17.5 26.0 9.0 15.5 26.0 10.0 16.5 31.0 10.0 17.0 31.0 12.0 19.0 - * THESE PARTS ARE AVAILABLE WITH BODY LENGTH OF 10.0mm (S=7.5mm) OR 13.0mm (S=10.0mm). PLEASE SPECIFY PREFERRED BODY LENGTH AT TIME OF QUOTE/ORDER. FOR BODY LENGTH OF 10.0mm ADD "L10MM" TO PART NUMBER (EXAMPLE: "NRP103K100L10MM"). FOR BODY LENGTH OF 13.0mm ADD "L13MM" TO PART NUMBER (EXAMPLE: "NRP103K100L13MM"). ® 76 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Polyester Film Capacitors NAP Series WRAP AND FILL, NON-INDUCTIVE, EXTENDED FOIL FILM CAPACITORS, AXIAL LEADS RoHS Compliant FEATURES • • • • • • • EXTENDED FOIL, NON-INDUCTIVE CONSTRUCTION LOW DISSIPATION FACTOR EXCELLENT MOISTURE RESISTANCE HIGH INSULATION RESISTANCE TIGHT TOLERANCE SMALL SIZE AND ECONOMICALLY PRICED TAPE AND REEL PACKAGING AVAILABLE includes all homogeneous materials *See Part Number System for Details SPECIFICATIONS PART NUMBER SYSTEM Operating Temperature Rated Voltage (VDC) Capacitance Range Capacitance Tolerance Insulation Resistance Dissipation Factor Dielectric Strength NAP -40°C ~ +85°C 100V, 200V, 400V, 600V, 1000V 0.001μF ~ 1.0μF ±10% (K), ±5% (J), ±2% (G) 50,000 Megohm Min. <0.0075 (at 1KHz) 250% of Rated Voltage for 5 Seconds 103 K 100 TR F RoHS compliant Tape & Reel Packaging Voltage (VDC) Tolerance Code J = ±5%, K = ±10% Series Capacitance code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF dφ ± 0.06 LEAD DIAMETER (mm) OD up to 8.0mm over 8.0mm 38mm min. L max. 38mm min. dφ 0.6mm 0.8mm Dφ max. STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Cap. (μF) 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 100VDC/63VAC OD L 5.0 14.0 5.0 14.0 5.0 14.0 5.0 14.0 5.0 14.0 5.0 14.0 5.0 14.0 5.5 14.0 6.0 14.0 6.0 14.0 6.5 16.0 7.5 16.0 8.5 19.0 8.5 23.0 9.5 27.0 10.5 32.0 12.5 32.0 14.5 32.0 17.0 39.0 200VDC/120VAC OD L 5.0 14.0 5.0 14.0 5.0 14.0 5.0 14.0 5.0 14.0 5.0 14.0 5.0 14.0 6.5 16.0 7.0 16.0 7.0 21.0 8.0 21.0 9.0 21.0 9.0 27.0 9.0 27.0 10.5 27.0 11.5 32.0 13.5 32.0 16.5 32.0 - Working Voltage (VDC) 400VDC/200VAC OD L 5.0 14.0 5.0 14.0 5.0 14.0 5.0 14.0 6.0 14.0 6.5 16.0 7.5 16.0 7.5 21.0 8.0 19.0 8.0 27.0 9.0 27.0 9.5 33.0 11.0 33.0 12.5 33.0 14.0 37.0 17.0 37.0 - 600VDC/200VAC OD L 5.5 14.0 5.5 14.0 6.0 16.0 7.0 16.0 7.0 16.0 7.0 19.0 7.5 21.0 7.5 27.0 9.0 27.0 10.0 27.0 10.0 33.0 11.5 33.0 13.5 33.0 17.0 33.0 - 1000VDC/260VAC OD L 6.5 16.0 7.0 16.0 6.5 19.0 7.0 19.0 8.0 19.0 8.0 23.0 9.0 23.0 10.0 23.0 11.5 23.0 11.5 32.0 13.0 32.0 14.0 37.0 17.0 37.0 20.0 37.0 - ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 77 Metallized Polyester Film Capacitors NRM Series EPOXY COATED, NON-INDUCTIVE, CAPACITORS, RADIAL LEAD FEATURES • NON-INDUCTIVE CONSTRUCTION • EPOXY RESIN COATED FOR EXCELLENT MOISTURE RESISTANCE • HIGH STABILITY WITH FREQUENCY OVER AN EXTENDED OPERATING LIFE • HIGH PERFORMANCE AT LOW COST • LEAD FORMING AND CUT LEADS AVAILABLE • METALLIZED CONSTRUCTION PROVIDE SELF HEALING CHARACTERISTICS SPECIFICATIONS Operating Temperature Rated Voltage (VDC) Capacitance Range Capacitance Tolerance Insulation Resistance Dissipation Factor Dielectric Strength L max. RoHS Compliant includes all homogeneous materials *See Part Number System for Details -40°C ~ +105°C 100V, 250V, 400V, 630V 0.01μF ~ 6.8μF ±10% (K), ±5% (J) C < 0.33μF IR > 15,000 Megohm C > .33μF IR > 5,000 Megohm <0.01 (at 1KHz) 150% of Rated Voltage for 5 Seconds PART NUMBER SYSTEM NRM 104 K 250 TR F RoHS compliant Tape & Reel Packaging Voltage (VDC) Tolerance Code J = ±5%, K = ±10% T max. Series Capacitance code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF LEAD SPACING AND DIAMETER (mm) H max. L S dφ *2mm max. L > 20mm 1.5mm max. L < 20mm 12.5 10.0 0.6 18.0 15.0 0.8 26.0 22.5 0.8 31.0 27.5 0.8 LL = 25mm min. SPECIAL LEAD FORMING AVAILABLE, PLEASE CONSULT FACTORY dφ S ± 1mm STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Cap. (μF) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100VDC/63VAC L T H 12.5 5.0 9.5 12.5 5.0 9.5 12.5 5.0 9.5 12.5 5.0 9.5 12.5 5.0 10.0 12.5 5.5 10.0 12.5 6.5 10.5 18.0 6.5 11.5 18.0 6.5 12.0 18.0 7.5 14.0 26.0 7.5 14.5 26.0 9.0 16.0 26.0 11.0 19.0 31.0 12.0 23.0 31.0 14.0 25.0 250VDC/160VAC 400VDC/200VAC 630VDC/220VAC L T H L T H L T H 12.5 5.0 9.5 12.5 5.0 9.5 12.5 5.0 9.5 12.5 5.0 9.5 12.5 5.0 9.5 12.5 5.0 9.5 12.5 5.0 9.5 12.5 5.0 9.5 12.5 7.0 10.5 12.5 5.0 9.5 12.5 5.5 10.5 18.0 6.0 11.0 12.5 5.0 9.5 12.5 6.0 10.5 18.0 6.5 11.5 12.5 5.0 9.5 18.0 6.0 10.5 18.0 7.0 13.0 12.5 5.5 10.0 18.0 6.5 11.5 26.0 7.0 13.0 12.5 6.5 10.5 26.0* 6.0* 12.5* 26.0 8.5 14.0 18.0 6.5 11.5 26.0* 7.0* 15.0* 26.0 10.0 16.5 18.0 7.0 12.5 26.0 8.5 15.5 31.0 10.5 17.5 26.0 7.0 12.5 26.0 9.5 18.0 31.0 12.0 19.5 26.0 8.0 14.5 26.0 12.0 18.5 31.0 15.0 22.5 26.0 10.5 17.5 31.0 12.0 20.0 31.0 19.0 27.0 26.0 10.5 18.0 31.0 13.5 23.5 31.0 12.5 19.0 31.0 16.5 26.0 31.0 14.0 23.0 31.0 16.5 27.0 *REDUCED SIZE 18mmx 8.5mm x15mm ALSO AVAILABLE. ® 78 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Metallized Polyester Film Capacitors NRM-S Series EPOXY COATED, NON-INDUCTIVE, CAPACITORS, REDUCED SIZE, RADIAL LEAD FEATURES • NON-INDUCTIVE CONSTRUCTION • EPOXY RESIN COATED FOR EXCELLENT MOISTURE RESISTANCE • METALLIZED CONTRUCTION PROVIDE SELF HEALING CHARACTERISTICS • HIGH STABILITY WITH FREQUENCY OVER AN EXTENDED OPERATING LIFE RoHS • HIGH PERFORMANCE AT LOW COST Compliant • REDUCED SIZE includes all homogeneous materials • LEAD FORMING AND CUT LEADS AVAILABLE *See Part Number System for Details SPECIFICATIONS Operating Temperature Rated Voltage (VDC) Capacitance Range Capacitance Tolerance -40°C ~ +85°C 100V, 250V, 400V, 630V 0.01μF ~ 10μF ±10% (K), ±5% (J) C < 0.33μF IR > 9,000 Megohm C > .33μF IR > 3,000 Megohm/μF 1% (at 1KHz/25°C) 150% of Rated Voltage for 5 Seconds Insulation Resistance Dissipation Factor Dielectric Strength T max. L max. H max. *2mm max. L > 20mm 1.5mm max. L < 20mm PART NUMBER SYSTEM NRM-S 104 K 250 F2 F LL = 25mm min. RoHS compliant Special Lead Forming Voltage (VDC) Tolerance Code J = ±5%, K = ±10% Series dφ Capacitance code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF S ± 1mm LEAD SPACING AND DIAMETER L S dφ 13.0 10.0 0.6 18.0 15.0 0.8 26.0 22.5 0.8 31.0 27.5 0.8 STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Cap. (μF) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 100VDC/63VAC L T H 12.5 6.5 10.5 12.5 7.0 12.0 18.5 8.5 13.0 18.5 7.5 15.5 18.5 9.0 16.5 26.0 8.0 16.5 26.0 9.5 17.5 26.0 11.0 21.0 250VDC/160VAC L T H 12.5 8.5 10.5 12.5 7.0 12.0 18.5 6.0 12.5 18.5 7.0 13.5 18.5 8.0 18.0 18.5 9.5 17.5 26.0 9.0 17.5 26.0 11.0 19.5 26.0 12.5 22.5 31.0 14.0 22.5 31.0 16.0 28.5 400VDC/200VAC L T H 12.5 5.5 8.5 12.5 6.0 10.0 12.5 7.0 11.0 18.5 5.5 12.0 18.5 6.5 13.0 18.5 7.5 14.0 18.5 8.5 16.5 26.0 7.5 17.0 26.0 8.5 18.5 31.0 9.5 19.0 31.0 11.5 21.5 - 630VDC/220VAC L T H 12.5 5.0 8.5 12.5 5.5 8.5 12.5 5.5 10.5 12.5 6.5 11.0 12.5 7.5 12.0 18.5 6.5 11.5 18.5 7.0 12.0 18.5 8.0 15.0 18.5 9.5 17.5 26.0 8.5 18.0 26.0 10.5 18.5 26.0 12.0 22.0 31.0 13.5 22.0 31.0 18.5 25.0 31.0 20.0 29.0 - ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 79 Metallized Polyester Film Capacitors NTM Series WRAP AND FILL, NON-INDUCTIVE, METALLIZED FOIL FILM CAPACITORS, AXIAL LEADS FEATURES • NON-INDUCTIVE CONSTRUCTION • WRAPPED WITH POLYESTER TAPE AND FILLED WITH EPOXY RESIN • HIGH STABILITY WITH FREQUENCY OVER AN EXTENDED OPERATING LIFE • HIGH PERFORMANCE AT LOW COST RoHS • TAPE AND REEL PACKAGING AVAILABLE Compliant includes all homogeneous materials SPECIFICATIONS *See Part Number System for Details Operating Temperature Rated Voltage (VDC) Capacitance Range Capacitance Tolerance Insulation Resistance Dissipation Factor Dielectric Strength -40°C ~ +85°C 100V, 200V, 400V, 630V 0.01μF ~ 18.0μF ±10% (K), ±5% (J), ±2% (G) C < 0.33μF IR > 15,000 Megohm C > .33μF IR > 5,000 Megohm <0.01 (at 1KHz) 150% of Rated Voltage for 5 Seconds PART NUMBER SYSTEM NTM 104 K 250 TR F RoHS compliant Tape & Reel Packaging Voltage (VDC) Tolerance Code J = ±5%, K = ±10% Series dφ ± 0.06 Capacitance code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF LEAD DIAMETER OD up to 8.0mm over 8.0mm dφ 0.6mm 0.8mm 38mm min. L max. Dφ max. 38mm min. STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Cap. (μF) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 12.0 15.0 18.0 100VDC/63VAC OD L 5.5 10.5 5.5 10.5 6.0 14.0 6.0 14.0 6.5 14.0 7.5 14.0 7.5 19.0 8.5 19.0 10.0 19.0 11.0 27.0 12.0 27.0 14.0 27.0 14.5 33.0 17.0 33.0 20.0 33.0 21.0 33.0 20.5 47.0 22.0 47.0 24.0 47.0 Working Voltage (VDC) 200VDC/120VAC 400VDC/200VAC OD L OD L 5.0 11.0 5.0 11.0 5.0 11.0 5.5 14.0 5.0 11.0 6.0 14.0 5.0 11.0 6.0 14.0 5.5 14.0 7.0 14.0 6.0 14.0 7.5 19.0 7.0 14.0 8.0 19.0 8.5 14.0 9.0 19.0 8.0 19.0 8.5 27.0 9.0 19.0 10.0 27.0 9.5 19.0 12.5 32.0 10.0 27.0 13.0 33.0 11.5 27.0 15.5 33.0 12.5 32.0 17.5 33.0 14.0 33.0 20.0 38.0 16.5 33.0 27.0 43.0 20.0 38.0 30.0 43.0 24.0 43.0 27.0 47.0 23.0 48.0 23.0 48.0 24.5 47.0 27.0 47.0 - 630VDC/200VAC OD L 6.0 14.0 6.5 14.0 7.0 14.0 8.0 19.0 8.0 19.0 9.0 19.0 9.5 27.0 10.5 27.0 11.5 32.0 13.0 33.0 14.0 33.0 17.5 33.0 21.0 38.0 25.0 47.0 28.0 47.0 28.0 47.0 - ® 80 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Metallized Polyester Film Capacitors WRAP AND FILL, NON-INDUCTIVE, METALLIZED FILM CAPACITORS, AXIAL LEAD FEATURES • • • • • NAM Series RoHS Compliant includes all homogeneous materials NEW SIZES *See Part Number System for Details NON-INDUCTIVE CONSTRUCTION WRAPPED WITH POLYESTER TAPE AND FILLED WITH EPOXY RESIN AT BOTH ENDS HIGH STABILITY WITH FREQUENCY OVER AN EXTENDED OPERATING LIFE HIGH PERFORMANCE AT LOW COST SPECIFICATIONS Operating Temperature Rated Voltage (VDC) Capacitance Range Capacitance Tolerance Insulation Resistance Dissipation Factor Dielectric Strength PART NUMBER SYSTEM -40°C ~ +85°C 100V, 250V, 400V, 630V 0.01μF ~ 18μF ±10% (K), ±5% (J) C < 0.33μF IR > 9,000 Megohm C > .33μF IR > 3,000 Megohm/μF <0.01 (at 1KHz/25°C) 150% of Rated Voltage for 5 Seconds NAM 223 K 630 F RoHS compliant Voltage (VDC) Tolerance Code J = ±5%, K = ±10% Capacitance code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF Series dφ ± 0.06 H max. LEAD DIAMETER (mm) 38mm min. L max. 38mm min. T max. L dφ 14.0 0.6 19.0 0.6 27.0 0.8 32.0 0.8 47.0 1.0 STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Cap. (μF) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 12.0 15.0 18.0 100VDC/63VAC L T H 14.0 5.0 8.5 19.0 6.0 9.0 19.0 5.0 9.5 19.0 5.5 10.0 19.0 6.5 12.0 27.0 6.0 12.5 27.0 8.0 14.0 27.0 10.0 16.5 33.0 10.5 18.0 33.0 12.0 21.0 33.0 13.0 23.0 37.0 15.0 24.0 43.0 15.0 26.0 47.0 15.0 28.0 47.0 18.0 31.0 250VDC/160VAC L T H 11.0 5.0 8.0 11.0 5.0 8.0 11.0 5.0 8.0 11.0 5.0 8.0 11.0 5.0 8.0 14.0 5.0 8.0 14.0 5.0 9.0 19.0 5.0 9.5 19.0 6.0 10.5 25.0 7.0 11.5 27.0 7.0 12.5 27.0 8.0 13.5 33.0 8.5 15.0 33.0 10.0 17.5 37.0 12.5 21.0 43.0 11.0 21.0 47.0 14.0 25.0 47.0 15.0 25.0 48.0 18.0 30.0 48.0 18.0 31.0 48.0 19.5 34.0 - 400VDC/200VAC L T H 11.0 5.0 8.0 14.0 5.0 8.0 14.0 5.0 8.0 14.0 5.5 9.0 14.0 6.0 10.0 14.0 6.0 11.0 19.0 5.5 10.5 19.0 6.5 11.0 25.0 7.0 14.0 27.0 7.5 13.5 32.0 8.5 17.0 33.0 9.0 16.5 33.0 10.5 19.0 38.0 13.0 22.0 44.0 16.0 24.0 47.0 16.0 26.0 48.0 18.0 28.0 48.0 23.0 34.0 48.0 25.0 36.0 48.0 28.0 37.0 - 630VDC/220VAC L T H 14.0 5.0 8.0 14.0 5.5 9.0 14.0 6.0 9.0 19.0 6.0 10.0 19.0 6.0 10.0 19.0 7.0 11.5 25.0 6.5 11.5 27.0 8.0 14.0 27.0 9.0 15.0 33.0 10.0 15.0 33.0 12.0 19.0 38.0 15.0 20.5 47.0 16.0 23.0 47.0 20.0 28.0 47.0 22.0 30.0 48.0 21.5 34.5 - ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 81 Metallized Polypropylene Film Capacitors NPRM Series EPOXY COATED, NON-INDUCTIVE, METALLIZED POLYPROPYLENE FILM CAPACITORS, RADIAL LEAD RoHS FEATURES Compliant • HIGH RELIABILITY AND SELF-HEALING PERFORMANCE includes all homogeneous materials • LOW DISSIPATION FACTOR *See Part Number System for Details • RECOMMENDED FOR HIGH FREQUENCY COUPLING AND DECOUPLING CIRCUITS (E.G. S-CURVE COMPENSATING CIRCUIT) SPECIFICATIONS Operating Temperature -40°C ~ +85°C PART NUMBER SYSTEM Rated Voltage (VDC) Capacitance Range Capacitance Tolerance Insulation Resistance Dissipation Factor Dielectric Strength 100V, 250V, 400V, 630V 0.01μF ~ 10μF ±10% (K), ±5% (J) C < 0.33μF IR > 30,000 Megohm C > .33μF IR > 10,000 Megohm/μF <0.002 (at 1KHz) (Typical 0.001) <0.002 (at 10KHz) For 0.01<C<0.1μF <0.003 (at 10KHz) For 0.1<C<1.0μF 150% of Rated Voltage for 5 Seconds NPRM 104 K 250 TR F2 F RoHS compliant Special Lead Forming Tape & Reel Packaging Voltage (VDC) Tolerance Code J = ±5%, K = ±10% Series Capacitance code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF T L H *2mm max. L > 20mm 1.5mm max. L < 20mm LL = 25mm min. SPECIAL LEAD FORMING AVAILABLE, PLEASE CONSULT FACTORY dφ LEAD SPACING AND DIAMETER(mm) L S dφ 13.0 10.0 0.6 18.0 15.0 0.8 26.0 22.5 0.8 31.0 27.5 0.8 S ± 1mm STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Cap. (μF) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 100VDC/63VAC L T H 10.0 5.5 9.0 10.0 5.5 9.0 10.0 6.0 9.5 10.0 6.0 9.5 13.0 6.0 10.5 13.0 6.5 11.0 13.0 6.5 11.0 13.0 7.0 11.0 18.0 6.5 12.0 18.0 7.5 14.0 18.0 8.5 15.0 26.0 9.0 16.0 26.0 11.0 17.5 26.0 13.0 19.0 31.0 13.0 20.0 31.0 15.0 21.5 31.0 17.0 23.0 31.0 21.0 25.0 31.0 23.0 26.0 31.0 24.0 28.0 250VDC/220VAC L T H 13.0 5.0 9.0 13.0 6.0 9.5 13.0 5.0 9.0 13.0 5.5 9.0 13.0 6.0 10.0 13.0 6.0 11.0 13.0 7.0 11.0 18.0 7.0 12.0 18.0 7.5 12.5 18.0 8.5 14.0 26.0 8.5 15.0 26.0 9.5 17.0 26.0 12.0 20.5 31.0 13.0 20.5 31.0 15.0 14.5 31.0 17.0 26.0 31.0 19.0 28.0 42.0 19.0 33.0 42.0 21.0 36.0 42.0 22.0 38.0 400VDC/250VAC L T H 13.0 5.0 9.0 13.0 6.0 9.5 13.0 5.5 10.5 13.0 7.0 11.0 13.0 7.5 12.5 18.0 6.5 12.5 18.0 7.5 13.5 26.0 7.5 14.5 26.0 8.5 15.5 26.0 10.0 17.5 31.0 10.0 18.0 31.0 12.5 21.5 31.0 15.0 24.0 31.0 17.5 26.5 - 630VDC/300VAC L T H 13.0 6.5 11.5 13.0 7.5 12.0 13.0 9.0 13.5 18.0 8.0 14.0 18.0 8.5 13.5 18.0 9.5 15.5 26.0 8.5 15.5 26.0 9.5 17.5 31.0 10.0 17.0 31.0 13.0 21.5 31.0 15.5 24.5 31.0 17.5 27.0 - ® 82 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Metallized Polypropylene Film Capacitors NPTM Series WRAP AND FILL, NON-INDUCTIVE, METALLIZED POLYPROPYLENE FILM CAPACITORS, AXIAL LEAD FEATURES RoHS • LOW INDUCTANCE, LOW ESR AND EXCELLENT Compliant includes all homogeneous materials FOR HIGH RIPPLE ..CURRENT • IDEAL FOR HIGH PERFORMANCE INPUT FILTER, *See Part Number System for Details DC BLOCKING AND OUTPUT FILTER APPLICATIONS IN HIGH FREQUENCY SWITCHED-MODE POWER SUPPLIES • AVAILABLE ON TAPE AND REEL FOR AUTOMATIC INSERTION SPECIFICATIONS Operating Temperature Rated Voltage (VDC) Capacitance Range Capacitance Tolerance Insulation Resistance Dissipation Factor Dielectric Strength PART NUMBER SYSTEM -40°C ~ +85°C 100V, 250V, 400V, 630V 0.01μF ~ 10μF ±10% (K), ±5% (J) C < 0.33μF IR > 30,000 Megohm C > .33μF IR > 10,000 Megohm/μF <0.002 (at 1KHz) (Typical 0.001) <0.002 (at 10KHz) For 0.01<C<0.1μF <0.003 (at 10KHz) For 0.1<C<1.0μF 150% of Rated Voltage for 5 Seconds NPTM 104 J 160 TR F RoHS compliant Tape & Reel Packaging Voltage (VDC) Tolerance Code J = ±5%, K = ±10% Series Capacitance code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF dφ ± 0.06 LEAD DIAMETER (mm) OD up to 8.0mm over 8.0mm 13.0 0.6mm 0.8mm 38mm min. L max. 38mm min. Dφ max. 400VDC/250VAC OD L 5.5 14.0 6.0 14.0 7.0 14.0 7.5 14.0 8.0 14.0 8.0 19.0 8.5 19.0 10.0 27.0 9.5 27.0 11.5 27.0 13.0 32.0 15.0 33.0 17.0 33.0 20.5 37.0 24.0 38.0 26.0 47.0 30.0 47.0 - 630VDC/300VAC OD L 6.5 14.0 7.0 14.0 8.0 14.0 8.0 19.0 9.0 19.0 10.5 27.0 11.0 27.0 13.0 32.0 14.0 33.0 16.0 33.0 19.0 33.0 19.0 37.0 20.0 47.0 22.0 47.0 24.0 47.0 - STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Cap. (μF) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 100VDC/63VAC OD L 5.0 14.0 5.5 14.0 5.5 14.0 6.0 14.0 7.5 14.0 9.0 14.0 8.0 19.0 9.0 19.0 11.0 19.0 13.0 19.0 12.0 27.0 15.0 27.0 18.0 27.0 15.5 32.0 18.0 47.0 20.0 47.0 22.0 47.0 160VDC/85VAC OD L 5.5 14.0 6.0 14.0 6.5 1.40 7.0 14.0 8.0 14.0 8.0 19.0 9.0 19.0 10.0 19.0 11.0 27.0 12.0 27.0 13.5 32.0 16.5 32.0 20.0 32.0 19.0 47.0 22.5 47.0 25.0 47.0 27.0 47.0 Working Voltage (VDC) 250VDC/120VAC OD L 5.0 14.0 5.5 14.0 6.0 14.0 6.0 14.0 6.5 14.0 7.5 14.0 8.0 14.0 8.5 19.0 9.0 19.0 10.5 27.0 10.5 27.0 12.5 27.0 12.5 32.0 15.0 33.0 18.0 33.0 19.0 47.0 22.0 47.0 27.0 47.0 29.5 47.0 32.5 47.0 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 83 Interference Suppression Capacitor NPX Series MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES • UL, CSA, VDE, SEV, SEMKO, NEMKO, DEMKO, FIMKO, CE APPROVALS • “X2” SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS • METALLIZED POLYPROPYLENE FILM • NON-INDUCTIVE & SELF-HEALING CONTRUCTION RoHS • RoHS COMPLIANT & Pb-FREE FINISH Compliant includes all homogeneous materials • MOLDED CASE MEETS UL-94V-0 FLAMMABILITY TEST *See Part Number System for Details STANDARD VALUES AND CASE SIZE (mm) Cap. Value Capacitance (μF) Code 0.001 102 0.0012 122 0.0015 152 0.0018 182 0.0022 222 0.0027 272 0.0033 332 0.0039 392 0.0047 472 0.0056 562 0.0068 682 0.0082 822 0.01 103 0.012 0.015 0.018 123 153 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.1 104 0.12 124 0.15 154 0.18 184 L±0.5 T±0.5 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 13.0 18.0 13.0 18.0 13.0 18.0 18.0 13.0 18.0 13.0 18.0 13.0 18.0 13.0 18.0 13.0 18.0** 18.0 18.0* 18.0* 18.0* 18.0* 18.0* 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 6.0 5.0 6.0 6.0 7.5 6.2 8.5 8.5 H±0.5 LS±0.5#1 LD±0.08 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 12.0 12.0 12.0 11.0 12.0 12.0 13.5 13.5 14.5 14.5 SPECIFICATIONS Operating Temperature Rated Voltage Capacitance Range Capacitance Tolerance Insulation Resistance (min.) 10.0 0.6 -40°C ~ +100°C 250VAC/275VAC* 0.001μF ~ 1.0μF ±10% (K), ±20% (M) C < 0.33μF IR > 15,000 Megohm C > 0.33μF IR > 5,000 Megohm < 0.1% max. @ 1KHz/25°C 2000VDC (1414VAC rms) for 1 second Dissipation Factor Dielectric Strength *250 VAC for UL & CSA 275 VAC for VDE, SEV, SEMKO, NEMKO, DEMKO,FIMKO, CE DV/DT RATINGS 15.0 0.8 10.0 15.0 10.0 15.0 10.0 0.6 0.8 0.6 0.8 0.6 15.0 0.8 10.0 15.0 10.0 15.0 10.0 15.0 10.0 15.0 10.0 0.6 0.8 0.6 0.8 0.6 0.8 0.6 0.8 0.6 Capacitance Value (μF) 0.001 0.0015 0.0022 ~ 0.0047 0.0068 ~ 0.022 0.033 ~ 0.047 0.068 ~ 1.0 DV/DT (V/μS) 1,000 600 450 300 200 100 L T H 25mm min. 15.0 0.8 LD LS Miniature Version - Add "M" to part number suffix **Alternate Miniature Version - Add "M2" to part number suffix *These value are not available tape & box #1 - ±0.4mm tolerance available special order Meets the requirements of DIN EN132400 (VDO565 Teil 101):1999-06, IEC60384-14:1993-07, Table II +A1:1995-06, and EN132400, UL1414, UL1283 AND CSA C22.2 No. 1 & 2 ® 84 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Interference Suppression Capacitor NPX Series STANDARD VALUES AND CASE SIZE (mm) Cap. Value Capacitance (μF) Code 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 L±0.5 T±0.5 18.0* 18.0** 26.5* 26.5* 18.0* 26.5* 26.5* 18.0* 26.5** 32.0* 32.0* 26.5* 32.0* 32.0* 26.5* 32.0* 8.5 10.0 7.0 8.5 10.0 8.5 10.0 10.0 10.0 11.0 11.0 10.0 11.0 13.0 12.5 13.0 H±0.5 LS±0.5#1 LD±0.08 14.5 16.0 16.5 17.0 16.0 17.0 19.0 16.0 19.0 20.0 20.0 19.0 20.0 22.0 21.5 22.0 15 PART NUMBER SYSTEM NPX 103 M 275V X2 M or M2 TB F RoHS Compliant Optional Tape & Box Packaging** Miniature Size (see values table) 22.5 15.0 22.5 22.5 15.0 22.5 Safety Classification Voltage (VAC)* Tolerance Code K = ±10%, M = ± 20% 0.8 Capacitance code in PFD, first two digits are significant, third digit is no. of zeros. E.G. 103 = .01μF, 104 = .1μF, 105 = 1.0μF Series 27.5 22.5 **Tape & Box available for values up to 0.1μF with a lead-space of 10mm and 15mm 27.5 22.5 27.5 Miniature Version - Add "M" to part number suffix **Alternate Miniature Version - Add "M2" to part number suffix *These value are not available tape & box #1 - ±0.4mm tolerance available special order AMMO PACK TAPING DIMENSIONS 12.9mm 25.4mm 10mm 8.4mm 20.6mm 9.0mm 13mm 18mm 4.0mm 25.4mm AMMO PACK BOX DIMENSIONS PACKAGING QUANTITIES 55mm ±3.0 260mm ±5.0 330mm ±5.0 Ammo Pack: 10mm LS = 500/Box 15mm LS = 350/Box Bulk Packaging: 0.001μF ~ 0.12μF/500/Bag 0.15μF ~ 0.18μF/300/Bag 0.22μF ~ 0.27μF/250/Bag 0.33μF/200/Bag 0.39μF ~ 0.47μF*/150/Bag 0.47μF ~ 1.0μF/100/Bag *Mini-size ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 85 General Data For Capacitors EIA Capacitance Code vs. Pico-Nano-Micro Farad EIA Code 1R0 1R5 2R2 3R3 4R7 6R8 100 150 220 250 330 390 470 500 560 680 750 820 101 121 151 181 221 251 271 301 331 PicoFarard (pF) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 25 33 39 47 50 56 68 75 82 100 120 150 180 220 250 270 300 330 NanoFarad (nF) 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.025 0.033 0.039 0.047 0.050 0.056 0.068 0.075 0.082 0.1 0.12 0.15 0.18 0.22 0.25 0.27 0.30 0.33 MicroFarad (μF) 0.0001 0.00012 0.00015 0.00018 0.00022 0.00025 0.00027 0.0003 0.00033 EIA Code Capacitance Value 102 1,000 pF = 1 nF = .001 µF 103 10,000pF = 10 nF = .01 µF 104 100,000 pF= 100 nF = 0.1 µF 105 1,000,000 pF = 1,000 nF = 1.0 µF 106 10,000,000 pF = 10,000 nF = 10 µF CAPACITANCE TOLERANCE CODES Code A B C D E F G H J K L Tol. ±0.05pF ±0.1pF ±0.25pF ±0.5pF ±0.5% ±1.0% ±2.0% ±3.0% ±5.0% ±10% ±15% Code M N P Q S T U W Y Z - EIA Code 391 401 471 511 561 681 751 821 102 122 152 182 202 222 242 272 302 332 362 392 472 562 682 752 822 103 123 PicoFarard (pF) 390 400 470 510 560 680 750 820 1,000 1,200 1,500 1,800 2,000 2,200 2,400 2,700 3,000 3,300 3,600 3,900 4,700 5,600 6,800 7,500 8,200 10,000 12,000 EIA Code 153 183 223 243 273 333 363 393 473 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 106 107 108 NanoFarad MicroFarad (nF) (μF) 0.39 0.00039 0.4 0.0004 0.47 0.00047 0.51 0.00051 0.56 0.00056 0.68 0.00068 0.75 0.00075 0.82 0.00082 1.0 0.001 1.2 0.0012 1.5 0.0015 1.8 0.0018 2.0 0.002 2.2 0.0022 2.4 0.0024 2.7 0.0027 3.0 0.003 3.3 0.0033 3.6 0.0036 3.9 0.0039 4.7 0.0047 5.6 0.0056 6.8 0.0068 7.5 0.0075 82 0.0082 10 0.01 12 0.012 TEMPERATURE CONVERSION CENTIGRADE TO FAHRENHEIT 1 Micro Farad (µF) = 1x10-6Farad 1 Nano Farad (nF) = 1x10-9Farad 1 Pico Farad (pF) = 1x10-12Farad °C -80 -55 -45 -40 -35 -30 -20 -10 0 20 25 45 65 70 80 85 DC VOLTAGE CODES Tol. ± 20% ± 30% -0~+100% -10~+30% ± 22% -10~+50% -10~+75% -10~+100% -20~+5% -20~+80% - Code 0G 0L 0J 1A 1C 1E 1V 1H 1J 1K 2A Vdc 4.0 5.5 6.3 10 16 25 35 50 63 80 100 Code 2Q 2B 2C 2Z 2D 2P 2E 2F 2V 2G 2W Vdc 110 125 160 180 200 220 250 315 350 400 450 EFFECTIVE CAPACITANCE RANGE BY DIELECTRIC CERAMIC DISC PicoFarard NanoFarad MicroFarad (pF) (nF) (μF) 15,000 15 0.015 18,000 18 0.018 22,000 22 0.022 24,000 24 0.024 27,000 27 0.027 33,000 33 0.033 36,000 36 0.036 39,000 39 0.039 47,000 47 0.047 68,000 68 0.068 82,000 82 0.082 100,000 100 0.1 120,000 120 0.12 150,000 150 0.15 180,000 180 0.18 220,000 220 0.22 270,000 270 0.27 330,000 330 0.33 390,000 390 0.39 470,000 470 0.47 560,000 560 0.56 680,000 680 0.68 820,000 820 0.82 1,000,000 1,000 1.0 10,000,000 10,000 10 100,000,000 100,000 100 1,000,000,000 1,000,000 1,000 °F -112 -67 -49 -40 -31 -22 -4 14 32 68 77 113 149 158 176 185 °C 90 100 105 115 125 140 150 175 190 200 220 250 275 300 400 500 °F 194 212 221 239 257 284 302 347 374 392 428 482 527 572 752 932 .22µF MULTI-LAYER CERAMIC POLYESTER FILM POLYESTER, METALIZED POLYESTER AND POLYPROPYLENE 18µF TANTALUM & TANTALUM POLMER ELECTROLYTIC 680µF 82,000µF ALUMINUM ELECTROLYTIC DOUBLE LAYER CAPACITORS 4.7F 1.0pF 1000pF .01µF NIC COMPONENTS CORP. .1µF 1.0µF www.niccomp.com 10µF www.lowESR.com 100µF 1000µF 10,000µF www.RFpassives.com 1.0F 10F www.SMTmagnetics.com NMC SERIES - LAND PATTERN DIMENSIONS Component Outline D Solder Resist A C Land Pads B 1. Flow Soldering 0201 N/A N/A N/A N/A 0402 N/A N/A N/A N/A 0603 0.8 ~ 1.0 2.6 ~ 3.2 0.7 ~ 0.8 0.8 ~ 1.2 0805 0.8 ~ 1.4 3.0 ~ 4.0 0.9 ~ 1.2 0.8 ~ 1.6 Size 1206 1210 1.8 ~ 2.4 1.8 ~ 2.4 4.2 ~ 5.2 4.2 ~ 5.2 1.2 ~ 1.6 1.8 ~ 2.5 0.9 ~ 1.7 0.9 ~ 1.7 1808 N/A N/A N/A N/A 1812 2.5 ~ 32. 6.2 ~ 7.2 2.4 ~ 3.0 1.5 ~ 2.4 2220 N/A N/A N/A N/A 2225 N/A N/A N/A N/A 0201 0.2 ~ 0.3 0.7 ~ 1.0 0.3 ~ 0.4 0.25 ~ 0.35 0402 0.6 ~ 0.6 1.5 ~ 1.7 0.5 ~ 0.6 0.5 ~ 0.5 0603 0.8 ~ 1.0 2.6 ~ 3.2 0.7 ~ 0.8 0.8 ~ 1.2 0805 0.8 ~ 1.4 3.0 ~ 4.5 0.9 ~ 1.5 0.8 ~ 1.9 Size 1206 1210 1.8 ~ 2.4 1.8 ~ 2.4 4.2 ~ 5.8 4.2 ~ 5.8 1.2 ~ 1.8 1.8 ~ 2.8 0.9 ~ 2.0 0.9 ~ 2.0 1808 2.8 ~ 3.4 6.4 ~ 7.4 1.5 ~ 1.8 1.0 ~ 2.8 1812 2.5 ~ 3.2 6.2 ~ 7.8 2.4 ~ 3.3 1.5 ~ 2.7 2220 4.0 ~ 4.6 8.0 ~ 9.0 3.5 ~ 4.8 1.0 ~ 4.0 2225 4.0 ~ 4.6 7.6 ~ 10.0 6.0 ~ 6.6 1.5 ~ 2.7 Dimension (mm) A B C D 2. Reflow Soldering Dimension (mm) A B C D ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 31 Multilayer Ceramic Chip Capacitors REEL Taping Specifications REEL DIMENSIONS (mm) Reel Diameter (A) 7” (178 ± 2.0) 10” (250 ± 2.0) 13” (330 ± 2.0) B D B 13 ± 0.5 C 50 min. 100 ± 1.0 100 ± 1.0 D T max. 21 ± 1.0 8.4 +1.0/-0 (1812 case size 12.4 +2.0/-0) 7 INCH REEL QUANTITIES* Size Tape Size Min. Qty Per Reel Max. Qty Per Reel C 0201 8mm 0402 8mm 0603 8mm 0805 8mm 1206 8mm 1210 8mm 1812 12mm 20,000 10,000 4,000 4,000 4,000 2,000 1,000 20,000 10,000 4,000 5,000 5,000 5,000 2,000 *Quantity dependent on chip thickness. Contact NIC for reel quantities on larger diameter reels. CARRIER TAPE MATERIAL T Parts with a thickness of >1mm will be taped on embossed plastic carrier. Parts with a thickness of less then 1mm will be taped on paper carrier A EMBOSSED PLASTIC CARRIER TAPE DIMENSIONS (mm) Tape Size W F 8mm 8.0 ± 0.2 3.5 ± 0.05 12mm 12 ± 0.2 5.5 ± 0.05 E P0 1.75 ± 0.10 P2 4.0 ± 0.1 D K max. 1.5 +0.1-0.0 2.0 ± 0.5 Notes: 1. Specifications are in compliance with EIA RS481-1-A “Taping of surface Mount Components for Automatic Placement” 2. Dimensions Ao (max.) equals component width dimension plus 0.5mm 3. Dimension Bo (max.) equals component length dimension plus 0.5mm T max. P 2.0 4.0 ± 0.1 4.5 8.0 ± 0.1 0.3 EMBOSSED PLASTIC CARRIER TAPE D Po T E P2 F W Bo P Ao K See notes 3 & 4 regarding dimensions Ao and Bo CARDBOARD CARRIER TAPE DIMENSIONS (mm) Type Ao Bo 0201 0.37 ± 0.03 0.67 ± 0.05 0402 0.65 ± 0.05 1.15 ± 0.05 0603 1.1 ± 0.2 1.9 ± 0.2 0805 1.65 ± 0.2 2.4 ± 0.2 1206 2.0 ± 0.2 3.6 ± 0.2 W F E P1 P2 P0 - 4.0 ± 0.1 2.0 ± 0.5 4.0 ± 0.05 2.0 ± 0.05 8.0 ± 0.3 3.5 ± 0.5 1.75 ± 0.1 4.0 ± 0.1 D0 1.5 +0.1/-0.0 T1 T2 - 0.8 max. 1.1 max. 1.4 max. Mounting Hole Angular Punch Hole CARDBOARD CARRIER TAPE D Po t1 E P2 F W Bo ® 30 NIC COMPONENTS CORP. t2 www.niccomp.com Ao P1 Component Pitch www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Ceramic Disc Capacitors Taping Specifications DIMENSIONS (mm) ∆h T P P2 D P1 H1 S H L W d P0 Diameters up to 22mm max. are available on tape. P2 P D D T = 2 ~ 7mm DEPENDENT ON T.C. AND CV S H1 P1 H H0 L t W d P0 Symbol D d P* P0 Value Max. 12.0 0.6 12.7 25.4 12.7 Tolerance --- +0.06 ±1.0 -0.05 ±0.2 P1 5.1 3.85 3.18 2.6 ±0.7 P2 6.35 ±1.0 Dφ S 2.5 5.0 6.35 7.5 ±0.8 -0.2 H H0 H1 Dφ W L t ∆h 20.0 16.0 Max. 32.25 4.0 18.0 Max. 11.00 0.7 0 +1.5 -1.0 ±0.5 --- ±0.2 ±0.5 --- ±0.2 ±2.0 * -Dimension “P” is 12.7mm, for diameters up to 12mm, and 25.4mm for diameters 13-22mm. AMMO PACK H H ≤ 372 (14.64") L ≤ 377 (14.84") W ≤ 55 (2.16") REEL B L W D W Acceptable to standard radial type cartridge. D< = 354 (13.93") > B = 21 (.83") but < 30 (1.18") = W< = 55 (2.16") Acceptable to standard radial type cartridge with a few extra accessories. ® 42 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Film Chip Capacitor Special Precautions Soldering and Washing Guidelines 1. Use only flux and cream solders iwth a halogen content of 0.1% or less (by weight). 2. Parts supplied in special moisture resistant packaging should be soldered within 72 hours of breaking the packaging seal and stored during that time at +25°C and <70% relative humidity. 3. Since surface mount film chip capacitors do not have a protective coating care should be exercised when subjecting them to ultrasonic cleaning (durations up to 5 minutes at temperatures up to +50°c) or high pressure spray washing. Test the method of cleaning to insure that peeling of the top film layer and/or electrode separation does not occur. 4. Some of the acceptable cleaning agents are Ethanol, Isoproyl Alcohol, Ashahi Clean AK-225AES, HCFC141b-MS, P3 Cold Cleaner 225S, FRW-17, FRW-1N and FRW-100. Contact NIC regarding usage of other types of cleaning solvents. 5. Water washing using de-ioned water is possible, although care must be taken to eliminate moisture that may have penetrated the part. Experimentation underf actual production cleaning and drying conditions is highly suggested. The de-ioned water should be free of detergents and chemicals. Drying should be performed for 30 minutes a +85°C. Visual Inspection Guidelines Surface mount film chip capacitors are high performance stacked film components and as such can present some unique cosmetic appearance related issues. The following are post soldering visual inspection guidelines. 1. NORMAL IRREGULARITIES: a. Minor delamination: <30% of top cover layer of protective film (see figure 1) Figure 1 b. Minor curling: <30% of edges, corners of top and cover layer of protective film (see figure 2) Figure 2 ® 64 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Film Chip Capacitor Special Precautions Visual Inspection Guidelines (cont.) c. Splits in seams in the side walls < 0.1mm wide (see figure 3) Figure 3 d. Bulging: <30% of surface area (see figure 4) Figure 4 e. Separation of End Termination: <25% of termination length (see figure 5) Figure 5 1. ABNORMAL IRREGULARITIES (signs of overheating): a. Major delamination or curling: >50% of top cover layer of protective film (see figure 6) Figure 6 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 65 Notes f. Irregular surface: Raised bumps, evidence of melting in the top protective layer (see figure 7) Figure 7 g. Bulging of component body (see photograph 1) Photograph 1 h. Bulging of component body (see photograph 2) Photograph 2 ® 66 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Typical Temperature Characteristics NSFC and NSWC Series NSPC and NSHC Series ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 63 Stacked Film Capacitor Chips Taping Specificaitons REEL DIMENSIONS (mm) AND QUANTITY Case Code D ± 2.0 J1 A3 A4 B4 B5 178 B6 C4 C5 C6 C7 D2 ± 0.6 D3 ± 1.0 W ± 1.0 t ± 1.0 Qty/Reel 3,000 21.0 60.0 9.0 2.0 2,000 t REEL 13 .0 +/ − 2.0 +/− 0.5 0. D1 D3 5 D2 W EMBOSSED PLASTIC TAPE DIMENSIONS (mm) Case Code A ± 0.1 B ± 0.1 C ± 0.2 t ± 0.5 W ± 0.3 F ± 0.5 P ± 0.1 Dφ ± 0.2 J1 1.00 1.85 1.1 0.20 A3 1.3 1.55 2.3 A4 1.5 B4 1.5 B5 1.9 3.5 1.5 8.0 3.5 4.0 1.0 B6 1.9 0.25 C4 1.9 C5 1.9 2.8 3.5 C6 2.5 C7 2.5 4.0 ±0.1 P1 1.75 ±0.1 t 1.5 +0.1 -0 F W B Do A P ® C 62 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Radial Lead Taping Specifications Film Capacitors TAPE & REEL FOR RADIAL LEAD CAPACITOR REFER TO EIA STANDARD RS-468 CRIMPED LEAD TAPING (STANDARD) P2 STRAIGHT LEAD TAPING (SPECIAL) Contact NIC for Availability. P P1 P2 F P1 W2 H1 W1 W0 I0 P0 W2 F H2 H0 L P L W1 W W0 D0 I0 I W D0 P0 ∆h B max. Dimensions MM (inch) 12.7 ± 1.0 (0.5 ± 0.0394) 12.7 ± 0.2 (0.5 ± 0.008) 6.35 ± 1.3 (.025 ± 0.051) 3.85 ± 0.5 (0.152 ± 0.020) 5.0 ± 0.8 (0.197 ± 0.0315) 0 ± 2.0 (0 ± 0.0787) 18.0 ± 0.5 (0.709 ± 0.020) 9.0 ± 0.5 (0.354 ± 0.020) 20.0 ± 0.75 (0.787 ± 0.030) 18.0 ± 0.5 (0.709 ± 0.020) 16.0 ± 0.5 (0.630 ± 0.020) 2.0 max. (0.079 max.) 7.0 max. (0.276 max.) 4.0 ± 0.2 (0.157 ± 0.008) 12.5 min. (0.492 min.) 0.7 ± 0.2 (0.028 ± 0.008) 3.0 max. (0.118 max.) 11.0 max. (0.433 max.) P P0 P2 P1 F* ∆h W W1 H1 H2 H0 I I0 φD0 W0 t W2 L *-STANDARD LEAD SPACING ON TAPED PARTS IS 5MM. SPECIAL 7.5MM AND 10MM LEAD SPACING ARE AVAILABLE UPON SPECIAL REQUEST. TO SPECIFIC: LEAD SPACING P/N SUFFIX 5MM TR 7.5MM TR (7.5MMLS) 10MM TR (10MMLS) t REEL PACKING TR (TAPE/REEL) AMMO BOX PACKING TB (TAPE BOX) A A B B W1 C D W2 A – 15mm B – 80mm D – 370mm ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com W1 W2 – – 45mm 55mm www.RFpassives.com www.SMTmagnetics.com 79 Axial Lead Taping Specifications Film Capacitors TAPE & REEL OF AXIAL LEAD CAPACITORS FOR AUTOMATIC INSERTION EIA STANDARD RS-296-D Optional Design 6.35mm B Hub Recess I.D. “E” ≤ 1.2mm A Label Arbor Hole “C” Recess Depth 9.5mm (0.374") Minimum Dia “D” ≤ 0.8mm Core Diameter “F” Capacitor Body Diameter Capacitor Pitch "A" ± 0.5mm (0.020") < 5mm (<0.197") 5.01 ~ 10mm (0.197 ~ 0.394") 10.01 ~ 15mm (0.394 ~ 0.591") 5mm or 0.200" 10mm or 0.400" 15mm or 0.600" Capacitor Body Length Inside Tape Spacing "B" ± 1.5mm (0.059") < 16.50mm (<0.65") 16.51 ~ 28.45mm (0.651 ~ 1.12") 28.46 ~ 37.00mm (1.121 ~ 1.45") 52.4mm or 2.062" 63.5mm or 2.500" 73.0mm or 2.874" REEL DIMENSIONS C D E F 14.50mm (0.570") 381.0mm (15") 54.2mm (2.130") 61.0mm (2.401") MAXIMUM QUALITY OF COMPONENTS ON REEL Capacitor Body Dia. < 5mm 5.1 ~ 7.0mm 7.1 ~ 9.5mm Pitch 5mm 10mm 10mm Quantity pcs/reel 4,000 max. 2,000 max. 1,000 max. ® 78 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Cross Reference Guide NIC Series AVX Cornell NCA W3A4 *** NCD *** *** Epcos Kemet B37871 B37872 C1632 B37873 KOA Illinois Mallory Murata Nichicon Panasonic Phillips Rifa-Evox TDK Vitramon Wima Yageo *** *** *** GNM *** *** 0612 *** *** *** *** *** *** BCR GCR GHR GMR GQR CEC CMC CPC GE GH GM GP GS *** *** ECC ECK ECF D DTZ DD *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** M *** *** ECU-S *** *** P *** *** *** *** *** *** QYX *** *** *** *** *** *** *** *** ECU(Z) ECU(0) ECU(1) ECU(2) ECU(3) ECU(4) C..0201 C..0402 C..0603 C..0805 C..1206 C..1210 *** CC0201 CC0402 CC0603 CC0805 CC1206 CC1210 VJ0201 VJ0402 VJ0603 VJ0805 VJ1206 VJ1210 *** CC0201 CC0402 CC0603 CC0805 CC1206 CC1210 K CN CW CZ A A40 A41 A43 NCM SR *** *** C315 ~ C350 NCMA SA *** *** C410 ~ C440 NEM *** DLM DLR *** *** *** NMC 0201 0402 0603 0805 1206 1210 *** B37920 B37930 B37940 B37871 B37949 C0201 C0402 C0603 C0805 C1206 C1210 0201 0402 0603 0805 1206 1210 *** *** GRM03 GRM15 GRM18 GRM21 GRM31 GRM32 NRM NRM-S *** DMM *** *** *** MSR *** *** QXJ QXN ECQ-E MKT *** *** *** *** *** NSFC *** FCN *** *** *** *** 198 *** *** ECWU(B) *** GMC *** *** SMD2220 SMD2824 *** NSHC *** *** *** *** *** *** *** *** *** ECHU(X) SMC *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** PPS 390 ~ 394 *** *** FCP *** *** *** *** *** *** *** ECHU(B) *** NSPC *** FCA *** *** *** *** *** *** *** ECPU *** *** NSPU *** *** *** *** *** *** 198 *** *** ECWU(X) *** GMC NSWC *** MMWA *** *** *** MWR 150 *** QAS *** *** *** NTM Note: Crosses may not be exact for all characteristics. Please consult the datasheet for detailed specifications. (For additional cross reference information see our website cross reference search engine at: www.niccomp.com) T6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com