OM7650 550 MHz, 34 dB gain push-pull amplifier Rev. 01 — 31 May 2006 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module in SOT115BA package operating at a supply voltage of 24 V (DC). CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling. 1.2 Features n n n n n n n Excellent linearity Extremely low noise High gain Silicon nitride passivation Rugged construction TiPtAu metallized crystals ensure excellent reliability Surface mount transformers 1.3 Applications n Single module line extender in CATV systems operating in the 40 MHz to 550 MHz frequency range. 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit Gp power gain f = 50 MHz 33.0 - 35.0 dB 33.2 - - dB 300 - 340 mA f = 550 MHz Itot [1] total current VB = 24 V [1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. OM7650 Philips Semiconductors 550 MHz, 34 dB gain push-pull amplifier 2. Pinning information Table 2. Pinning Pin Description 1 input 2 common 3 common 5 +VB 7 common 8 common 9 output Simplified outline Symbol 5 1 3 5 7 9 1 9 2 3 7 8 sym095 3. Ordering information Table 3. Ordering information Type number OM7650 Package Name Description Version - rectangular single-ended package; aluminium flange; SOT115BA 2 vertical mounting holes; 2 × 6-32 UNC; 7 Sn-plated in-line leads 4. Marking Table 4. Marking Type number Marking OM7650 INDI 50 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Vi Conditions Min Max Unit input voltage - 55 dBmV Tstg storage temperature −40 +100 °C Tmb mounting base temperature −20 +100 °C OM7650_1 Product data sheet © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Rev. 01 — 31 May 2006 2 of 7 OM7650 Philips Semiconductors 550 MHz, 34 dB gain push-pull amplifier 6. Characteristics Table 6. Characteristics Bandwidth 40 MHz to 550 MHz; VB = 24 V; Tcase = 35 °C; ZS = ZL = 75 Ω unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Gp power gain f = 50 MHz 33.0 - 35.0 dB f = 550 MHz 33.2 - - dB SL slope cable equivalent f = 40 MHz to 550 MHz 0.2 - 2.0 dB FL flatness of frequency response f = 40 MHz to 550 MHz - - ±0.5 dB S11 input return losses f = 40 MHz to 160 MHz 15 - - dB f = 160 MHz to 550 MHz 10 - - dB S22 output return losses f = 40 MHz to 160 MHz 15 - - dB f = 160 MHz to 550 MHz 10 - - dB CTB composite triple beat 77 channels flat; Vo = 44 dBmV; measured at 547.25 MHz - - −45 dB CSO composite second-order distortion 77 channels flat; Vo = 44 dBmV; measured at 548.5 MHz - - −57 dB NF noise figure f = 50 MHz - - 8 dB 300 - 340 mA total current Itot [1] VB = 24 V [1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. OM7650_1 Product data sheet © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Rev. 01 — 31 May 2006 3 of 7 OM7650 Philips Semiconductors 550 MHz, 34 dB gain push-pull amplifier 7. Package outline Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC; 7 Sn-plated in-line leads SOT115BA D E Z A2 1 2 3 5 7 8 9 A L F S W c b e d w M e1 U2 Q q1 B y M x B M B p U1 q 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A2 max. max. mm 20.8 9.1 OUTLINE VERSION b c d D E max. max. max. e e1 F 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 L min. p Q max. 8.8 4.15 3.85 2.4 q 38.1 25.4 REFERENCES IEC JEDEC q1 JEITA S U1 U2 W w 4.2 44.75 8.2 6-32 0.25 44.25 7.8 UNC EUROPEAN PROJECTION x y Z max. 0.7 0.1 3.8 ISSUE DATE 05-06-15 05-11-11 SOT115BA Fig 1. Package outline SOT115BA OM7650_1 Product data sheet © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Rev. 01 — 31 May 2006 4 of 7 OM7650 Philips Semiconductors 550 MHz, 34 dB gain push-pull amplifier 8. Revision history Table 7. Revision history Document ID Release date Data sheet status Change notice Supersedes OM7650_1 20060531 Product data sheet - - OM7650_1 Product data sheet © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Rev. 01 — 31 May 2006 5 of 7 OM7650 Philips Semiconductors 550 MHz, 34 dB gain push-pull amplifier 9. Legal information 9.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.semiconductors.philips.com. 9.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Philips Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Philips Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 9.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, Philips Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — Philips Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Philips Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a Philips Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Philips Semiconductors accepts no liability for inclusion and/or use of Philips Semiconductors products in such equipment or applications and therefore such inclusion and/or use is for the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — Philips Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.semiconductors.philips.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Philips Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 9.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 10. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] OM7650_1 Product data sheet © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Rev. 01 — 31 May 2006 6 of 7 OM7650 Philips Semiconductors 550 MHz, 34 dB gain push-pull amplifier 11. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 9.1 9.2 9.3 9.4 10 11 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 2 3 4 5 6 6 6 6 6 6 7 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © Koninklijke Philips Electronics N.V. 2006. All rights reserved. For more information, please visit: http://www.semiconductors.philips.com. For sales office addresses, email to: [email protected]. Date of release: 31 May 2006 Document identifier: OM7650_1