PHILIPS BAP70-04W

BAP70-04W
Silicon PIN diode
Rev. 02 — 3 April 2007
Product data sheet
1. Product profile
1.1 General description
Two planar PIN diodes in series configuration in a SOT323 small SMD plastic package.
1.2 Features
n High voltage current control RF resistor for RF attenuators
n Low diode capacitance
n Low series inductance
1.3 Applications
n RF attenuators and switches
2. Pinning information
Table 1.
Pinning
Pin
Description
1
anode
Simplified outline
2
cathode
3
common connection
Symbol
3
3
1
2
sym015
1
2
sot323_so
3. Ordering information
Table 2.
Ordering information
Type number
BAP70-04W
Package
Name
Description
Version
-
plastic surface-mounted package; 3 leads
SOT323
BAP70-04W
NXP Semiconductors
Silicon PIN diode
4. Marking
Table 3.
Marking codes
Type number
Marking code
BAP70-04W
1Np
5. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
Per diode
VR
continuous reverse voltage
-
50
V
IF
continuous forward current
-
100
mA
Ts = 90 °C
Ptot
total power dissipation
-
260
mW
Tstg
storage temperature
−65
+150
°C
Tj
junction temperature
−65
+150
°C
6. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Parameter
Rth(j-s)
thermal resistance from junction to soldering point
Conditions
Typ
Unit
230
K/W
7. Characteristics
Table 6.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Per diode
VF
forward voltage
IF = 50 mA
-
0.95
1.1
V
IR
reverse current
VR = 50 V
-
-
100
nA
Cd
diode capacitance
see Figure 1; f = 1 MHz
VR = 0 V
-
600
-
fF
VR = 1 V
-
430
-
fF
VR = 20 V
-
250
300
fF
-
77
100
Ω
IF = 1 mA
-
40
50
Ω
IF = 10 mA
-
5.4
7
Ω
IF = 100 mA
-
1.4
1.9
Ω
rD
diode forward
resistance
see Figure 2; f = 100 MHz
IF = 0.5 mA
τL
charge carrier life time
when switched from IF = 10 mA to IR = 6 mA;
RL = 100 Ω; measured at IR = 3 mA
-
1.25
-
µs
LS
series inductance
IF = 100 mA; f = 100 MHz
-
1.4
-
nH
BAP70-04W_2
Product data sheet
© NXP B.V. 2007. All rights reserved.
Rev. 02 — 3 April 2007
2 of 7
BAP70-04W
NXP Semiconductors
Silicon PIN diode
001aaa461
600
mce007
103
rD
(Ω)
Cd
(fF)
500
102
400
10
300
200
0
5
10
15
20
1
10−1
1
f = 1 MHz; Tj = 25 °C
f = 100 MHz; Tj = 25 °C
Fig 1. Diode capacitance as a function of reverse
voltage; typical values
Fig 2. Forward resistance as a function of forward
current; typical values
BAP70-04W_2
Product data sheet
102
10
IF (mA)
VR (V)
© NXP B.V. 2007. All rights reserved.
Rev. 02 — 3 April 2007
3 of 7
BAP70-04W
NXP Semiconductors
Silicon PIN diode
8. Package outline
Plastic surface-mounted package; 3 leads
SOT323
D
E
B
A
X
HE
y
v M A
3
Q
A
A1
c
1
2
e1
bp
Lp
w M B
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
max
bp
c
D
E
e
e1
HE
Lp
Q
v
w
mm
1.1
0.8
0.1
0.4
0.3
0.25
0.10
2.2
1.8
1.35
1.15
1.3
0.65
2.2
2.0
0.45
0.15
0.23
0.13
0.2
0.2
OUTLINE
VERSION
REFERENCES
IEC
SOT323
JEDEC
JEITA
SC-70
EUROPEAN
PROJECTION
ISSUE DATE
04-11-04
06-03-16
Fig 3. Package outline SOT323
BAP70-04W_2
Product data sheet
© NXP B.V. 2007. All rights reserved.
Rev. 02 — 3 April 2007
4 of 7
BAP70-04W
NXP Semiconductors
Silicon PIN diode
9. Revision history
Table 7.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BAP70-04W_2
20070403
Product data sheet
-
BAP70-04W_1
Modifications:
BAP70-04W_1
(9397 750 12557)
•
The format of this data sheet has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
•
•
Legal texts have been adapted to the new company name where appropriate.
Table 6: changed max value of reverse current from 20 nA to 100 nA.
20040305
Product data
BAP70-04W_2
Product data sheet
-
© NXP B.V. 2007. All rights reserved.
Rev. 02 — 3 April 2007
5 of 7
BAP70-04W
NXP Semiconductors
Silicon PIN diode
10. Legal information
10.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
10.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
10.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
10.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
11. Contact information
For additional information, please visit: http://www.nxp.com
For sales office addresses, send an email to: [email protected]
BAP70-04W_2
Product data sheet
© NXP B.V. 2007. All rights reserved.
Rev. 02 — 3 April 2007
6 of 7
BAP70-04W
NXP Semiconductors
Silicon PIN diode
12. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
8
9
10
10.1
10.2
10.3
10.4
11
12
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . .
General description. . . . . . . . . . . . . . . . . . . . . .
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pinning information . . . . . . . . . . . . . . . . . . . . . .
Ordering information . . . . . . . . . . . . . . . . . . . . .
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal characteristics. . . . . . . . . . . . . . . . . . .
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . .
Package outline . . . . . . . . . . . . . . . . . . . . . . . . .
Revision history . . . . . . . . . . . . . . . . . . . . . . . . .
Legal information. . . . . . . . . . . . . . . . . . . . . . . .
Data sheet status . . . . . . . . . . . . . . . . . . . . . . .
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact information. . . . . . . . . . . . . . . . . . . . . .
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
1
2
2
2
2
4
5
6
6
6
6
6
6
7
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2007.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 3 April 2007
Document identifier: BAP70-04W_2