Baumer electric Laser copy counter SCATEC-J Baumer electric is proud to introduce the SCATEC-J Laser Copy Counter, a member of the SCATEC family of non-contact laser-based sensors, designed to count newspapers, magazines and other printed matter in a lap or shingle stream. The competitively priced SCATEC-J is the perfect sensor for applications with a product thickness of more than 1.5 mm and a counting rate up to 280,000 pieces per hour. Your benefit! • Accurate counting Benefit from the performance of the well-known and successful SCATEC family: The Industry Standard! • Plug and Play Nothing to adjust, nothing to align. • Easy to mount The sensor is mounted parallel to the conveyer. Application hints Mount the sensor parallel to the conveyor at a distance of 40 mm and plug it in. No further alignment and adjustment needed! A diagram on the sensor label makes it easy to mount the sensor in the correct orientation towards the lap stream. Only edges facing the laser beam are counted, edges facing away from the laser beam are not detected. Photoelectric sensors Laser copy counter SCATEC-J FLDK 110G1010/S14 • non-contact laser-based detecting and counting of printed matter and other flat objects 13 • flat objects may overlap 98 24 56 6 ø6 M6 • for objects thicker than 1.5 mm Laser beam M 12 x1 110 • color independent • plug and play LED 65 ˚ 8,5 15 45 30 technical data measuring range sensitivity color insensitivity counting rate object speed object spacing product orientation light source laser spot size ( 40 mm beneath sensor) supply voltage range +Vs supply current average value / peak value input power output output pulse length dead time connector short circuit protection reverse polarity protection housing material weight operating temperature protection class recommended mounting 50 0...55 mm below the sensor for single sheet thickness >1.5 mm; highest sensitivity 30...45 mm below the sensor (test objects: neatly cut, matte white cardboard) insensitive to color changes of the object even near to the edge max. 250,000 copies/h 0...2 m/s > 12 mm at speed 1 m/s > 24 mm at speed 2 m/s folded edge leading laser diode 670 nm, visible red, mean output power < 0.5 mW, laser class 2 2 mm diameter +10...+30 VDC <170 mA / <180 mA <2 W push - pull 10 ms 12 ms M12 x 1, male socket, 5 pin yes yes plastic (PBTP) approx. 130 g 0...+50 °C (non condensing) IP 54 parallel to and 40 mm above the conveyer belts connection diagram laser caution CAUTION M12 - male socket LASER RADIATION DO NOT STARE INTO BEAM do not connect 2 LASERDIODE Wavelength: 650 - 670 nm Max. Output: < 1 mW IEC 825-1 / 2001 Class 2 LASER Product + Vs 1 5 do not connect 3 0V 4 signal output + Baumer Electric Ltd. 122 Spring Street, Unit C6, Southington, CT 06489 Phone: 800-937-9336 E-Mail: [email protected] www.baumerelectric.com