Laser copy counter SCATEC-2

Baumer electric
Laser copy counter
SCATEC-2
Baumer electric is proud to introduce the SCATEC-2
Laser Copy Counter, a member of the SCATEC family
of non-contact laser-based sensors, designed to count
newspapers, magazines and other printed matter in a
lap or shingle stream.
The SCATEC-2 detects sheets down to a thickness of
0.2 mm at up to 600,000 pieces per hour. The sensor
is adjustable via a simple dip-switch.
Your benefit!
• High sensitivity
Paper thickness down to 0.2 mm can be easily
detected.
• High counting rate
Up to 600,000 copies per hour are possible.
• Settings
The sensor can be optimized via dip-switch.
• Easy to mount
The sensor is mounted parallel to the conveyer at
a 40 mm distance.
• Fast error diagnostics
If you ever suspect an error, the ScaDiag diagnostic
software can help pinpoint the source, saving significant
time, effort and money usually wasted in traditional
troubleshooting.
Application hints
Mount the sensor parallel to the conveyor at a distance
of 40 mm and plug it in. No further alignment and
adjustment needed!
A diagram on the sensor label makes it easy to mount the
sensor in the correct orientation towards the lap stream.
Only edges facing the laser beam are counted, edges
facing away from the laser beam are not detected.
Sensitivity, multiple-pulse suppression mode, and output pulse length are set via dip-switches.
Additionally, a flexible diagnostic and parameter-setting
software called ScaDiag is available. Using this software, the sensor can be controlled via serial interface.
Furthermore ScaDiag allows remote access to the
counter value (totalizer), sensor information and error
codes. A graphic diagram of the signal characteristics
helps when analyzing critical applications.
Baumer electric
Photoelectric sensors
Laser copy counter
SCATEC-2
FLDK 110G1003/S14 / FLDK 110G1003/S42
FLDK 110C1003/S42
30
15
ø6
M6
*)
Dip switches
LED
45
M 12 x1
98
110
technical data
range
sensitivity
6
50
24
*) connector /S42 :
M16 x 0.75
0...60 mm below the sensor
single sheet detection down to 0.2 mm* are recognized in the range of 37...43 mm
below the sensor (* test object: neatly cut, matte white paper)
color insensitivity
multi colored objects like magazines and other printed objects with a color range from
black to shiny white are recognized, even if the bright / dark transitions are near
to the edge
counting rate
object speed
distance between objects
stream condition
multiple pulse suppression
light source
voltage supply range +Vs
max. supply current
output
output pulse duration
connector
housing dimensions
housing material
weight
temperature range
protection class
recommended mounting
max. 600,000 copies/h
0...2 m/s for > 0.3 mm edges
0...1 m/s for > 0.2 mm edges
min. 1 mm at speed 0.2 m/s
min. 5 mm at speed 1 m/s
folded edge leading, in certain cases also cut edge leading
on / off switchable
laserdiode 670 nm, visible red, mean output power < 0.3 mW, laser class 2
10 - 30 VDC
150 mA
push-pull (FLDK 110G1003/S14 / FLDK 110G1003/S42)
opto isolated, open collector output (FLDK 110C1003/S42)
5, 10, 15 and 20 ms selectable
M12 x 1 or DIN 45322
110x50x30 mm
plastic (PBTP)
approx. 130 g
0...+50 °C (non condensing)
IP 54
parallel, to the conveyer belts and 40 mm above them
laser caution
CAUTION
LASER RADIATION
Do not stare
into beam
Wave length 650-670 nm
Max. output < 1 mW
IEC 825-1 / 2001
CLASS 2 LASER Product
Baumer Electric Ltd. 122 Spring Street, Unit C6, Southington, CT 06489 Phone: 800-937-9336 E-Mail: [email protected]
www.baumerelectric.com
FLDK 110G1003_S14/S42_DAB.pmd
1
30.04.2004, 16:46 Uhr