TBX - TBW Bimetal Thermometer with conical immersion tube Main Features Conical immersion tube Class 1 according to EN 13190 Immersion tube brass Installed length 62 mm Applications Water & Waste water Energy Machinery HVAC Technical Data Nominal size 80, 100, 160 mm Window Instrument glass Temperature range -20 ... 250°C Dial Aluminium, white Accuracy Class 1 (according to EN 13190) Pointer Aluminium, black Protection rating TBX: IP 50 (EN 60529) TBW: IP 65 (EN 60529) Minimum immersion LE ≥ 36 mm length Immersion tube Brass Case Stainless steel 1.4301 (AISI 304) Bezel ring Stainless steel 1.4301 (AISI 304) Options Code 0581 Acrylic window (PMMA or Plexiglass) (1) (2) Code 0752 Silicon free, label marking Code 0793 Silicon free, marking on dial Code 0794 Red mark Code 9700 Green mark Code 9701 According to customer data Code 9709 Customer logo on dial Code 9710 Specific technical data on dial Code 9711 (1) 90001188 The case must not be constantly heated over 75°C. Only NS 80 and NS 100. 2014-07-11 (2) To be ordered separately Calibration certificate (3 points) Design and specifications subject to change without notice Dampening grease www.baumer.com Data sheet B21 T1.206 TBX - TBW Page 1 / 3 (see VSM 33 713) TBX - TBW Bimetal Thermometer with conical immersion tube Dimensions (mm) TBX (center back) TBW (center back) Morse cone 1 (see VSM 33 713) Morse cone 1 (see VSM 33 713) NS Morse cone 1 (see VSM 33 713) Morse cone 1 (see VSM 33 713) Center back 80 cone 0.250 Morse 1 100 VSM0.300 (see 33 713) Correcting 0.200device 160 0.430 − Morse cone 1 (see VSM 33 713) 0.160 Thermowells Mors (see V Correcting device Only TBW 100/212.111 Weight (kg) Bottom TBX (bottom) Morse cone 1 (see VSM 33 713) Correcting device G 3/4 G 1/2 Welding Only TBW 100/212.111 Only TBW 100/212.111 Ordering codes for Thermowells Connection Material Technical Data Ordering code Weight (kg) Max. Temp. °C Max. Pressure (bar) Brass Steel St. Steel Brass T 06696.0001 0.110 G¾ Stainless steel 1.4435 (AISI 316L) T 06696.0005 0.110 100 64 125 250 G½ Brass T 06697.0001 0.080 250 25 80 160 G½ Stainless steel 1.4435 (AISI 316L) T 06697.0005 0.080 welded Steel, black finish T 06698.0001 0.080 welded Stainless steel 1.4435 (AISI 316L) T 06698.0002 0.080 Design and specifications subject to change without notice G¾ Temperature ranges Code Range °C 52T -20 ... 11T 0 ... 60 20T 0 ... 120 13T 0 ... 160 14T 0 ... 250 www.baumer.com 2014-07-11 40 Data sheet B21 T1.206 TBX - TBW Page 2 / 3 TBX - TBW Bimetal Thermometer with conical immersion tube Ordering details TBX - TBW TBX Model Bimetal Thermometer, conical (IP 50) Bimetal Thermometer, conical (IP 65) (1) Nominal size 80 mm (2) 100 mm 160 mm (2) Case Stainless steel 1.4301 (AISI 304) Connection Without connection (direct mounting) Immersion tube outlet Bottom Center back – . 2 . 1 xxx / TBX TBW 0 1 1 8 0 6 0 0 0 – 2 1 (only for NS 80 and NS 100) 1 2 Indication EN 13190 (Standard) Immersion tube / shape / material Morse cone 1, L = 62 mm, Cu−Leg. . 1 1 1 . Unit of measurement / Temperature ranges (3) °C Options to be added behind the / (see example below) xxT / The watertight design TBW can be supplied only with case NS 100 and the immersion tube outlet at the rear and exterior indicator correction. Only TBX. (3) Available standard temperature ranges, see table on page 2. For ranges not listed, please contact Baumer. (1) (2) Ordering example with options TBX 100 – 2 1 2 . 1 11 . 20T / 9710 _ 9700 _ 0793 Bimetal thermometer, conical (IP 50) Nominal size 100 mm Case material stainless steel 1.4301 (AISI 304) Without connection (direct mounting) Immersion tube outlet: Center back Design and specifications subject to change without notice Indication EN 13190 (standard) Immersion tube Morse cone 1, L = 62 mm, Cu−Leg. Temperature range: 0 ... 120°C Option: Customer logo on dial Option: Red mark 2014-07-11 Option: Silicon free, label marking www.baumer.com Data sheet B21 T1.206 TBX - TBW Page 3 / 3