TB 40-63 Bimetal Thermometer Main Features Multi-purpose standard thermometer Class 1 and 2 according to EN 13190 Immersion tube stainless steel Immersion length 100 – 400 mm Applications Food & Beverage Chemical Water & Waste water Energy Machinery Technical Data Nominal size 40, 63 mm Window Instrument glass Temperature range -30 ... 500°C Dial Aluminium, brush finished Accuracy According to EN 13190 up to 250°C: class 1 above 250°C: class 2 Pointer Aluminium, black Minimum immersion ranges ≤ 60°C: LE ≥ 59 mm ranges > 60°C: LE ≥ 39 mm length Protection rating IP 52 (EN 60529) Immersion tube Stainless steel 1.4571 (AISI 316 Ti) Case Stainless steel 1.4301 (AISI 304) Bezel ring Stainless steel 1.4301 (AISI 304) Options Acrylic window (PMMA or Plexiglass) (1) Code 0752 Silicon free, label marking Code 0793 Silicon free, marking on dial Code 0794 Red mark Code 9700 Green mark Code 9701 90001188 The case must not be constantly heated over 75°C. Design and specifications subject to change without notice (1) To be ordered separately Calibration certificate (3 points) Temperature ranges Code Range 61T -30 ... 30 11T 0 ... 60 20T 0 ... 120 13T 0 ... 160 14T 0 ... 250 15T 0 ... 400 30T 100 ... 500 www.baumer.com 2014-06-25 °C Data sheet B21 T1.105 TB 40-63 Page 1 / 2 TB 40-63 Bimetal Thermometer Drawing (dimensions in mm) Ø 40, 63 lT l lE Weight (kg) 40 0.022 63 0.047 Add per 100 mm lH = 13 Ø4 5 NS Ø 4 mm 0.005 lE + 5 lH = 14 lS Ordering details TB TB Model Bimetal Thermometer Nominal size 40 mm 63 mm – . 2 . 1 / TB 0 0 4 6 0 3 – Case Stainless steel 1.4301 (AISI 304) Connection Without connection (direct mounting) Immersion tube outlet Center back 2 1 2 . Indication EN 13190 (Standard) Immersion tube / diameter / material Ø 4 mm, stainless steel 1.4571 (AISI 316 Ti) Immersion tube / installed length L 60 mm 100 mm 160 mm 250 mm 400 mm 1 2 1 2 4 6 7 . Unit of measurement / Temperature ranges (1) °C Options to be added behind the / (see example below) xxT / Available standard temperature ranges, see table on page 1. For ranges not listed, please contact Baumer. Ordering example with options TB 040 – 2 1 2 . 1 2 2 . 20T / 9700 Bimetal thermometer Nominal size 40 mm Case material stainless steel 1.4301 (AISI 304) Without connection (direct mounting) Immersion tube outlet: Center back Indication EN 13190 (standard) Immersion tube Ø 4 mm, stainless steel 1.4571 (AISI 316 Ti) Immersion length (L) 100 mm 2014-06-25 Temperature range: 0 ... 120°C Option: Red mark www.baumer.com Design and specifications subject to change without notice (1) xxx Data sheet B21 T1.105 TB 40-63 Page 2 / 2