CMO3 Series 5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator CMO3 Series THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE M23.3V PRODUCT 5x7mm SERIES. Surface Mount Crystal Clock Oscillators CMOS Compatible Tri-State Feature for Auto Test Systems Tape & Reel Packaging ±20ppm Available - Please Contact Factory MODEL Frequency MODEL Range (MHz) E L E C T R I C A L S P E C I F I C AT I O N S E L E C T R I C A LCMO3 S P E C I F I C AT I O N S 1.5 to 156.250 CMO3 Frequency Stability Frequency Range(ppm) (MHz) Overall (Typical) Frequency Stability (ppm) Overall 0ºC to 70ºC(Typical) 1.5 to 156.250 Inclusive of calibration, temperature, voltage, load, shock, vibration, aging Inclusive of calibration, temperature, ±25 voltage, load, shock,vibration, aging 70°C -40ºC0°C to to +85ºC ±25 ±50 -40°C to +85°C ±50 Temperature Range (°C) Temperature Range (°C) Operating -40°C to +85°C Storage -40°C to +125°C Operating -40°C to +85°C Storage Supply Voltage (V)(V) Supply Voltage InputInput Current (mA) Current (mA) Symmetry CMOS Symmetry (%)(%) CMOS Transistion Transition TimeTimes Time (ns) 20% Rise to 80% Vdd Time (ns) Rise Fall Time (ns) LoadTime (ns) Fall “0” Level (VOL) Load “1” Level (V -40°C to +125°C +3.3 ±10% +3.3 ±10% >67 MHz to 156.25 MHz 1.5 MHz1.5MHz to 20 MHz >20 >35MHz MHz to to 5050MHz MHz >50MHz >50 MHztoto 67 MHz to 35MHz 100MHz >100MHz to 156.25MHz <25 <30<55 <10 <10 <20<15 <30 45/55 45/55 1.5MHz to 50MHz >50MHz to 156.250MHz 1.5 MHz to 50 MHz >50 MHz to 156.250 MHz <5 <3 <5 <5 <5 ) <3<3 15pF 0.3 15pF OH “0” Level (VOL) max 3.0 10% Vdd “1” Level (VOH) min 90% Vdd Start up Time (ms) <10 Start up Time (ms) <3 <10 PA R T N U M B E R I N G G U I D E CMO3XXXC - Specify Frequency “Blank” = 0oC to 70oC Operating Temp. “M” = -40oC to 85oC Operating Temp. “A” = ±25ppm (-40oC to 85oC Excluding Aging) “B” = ±50ppm “C” = ±100ppm “D” = ±20ppm Excluding Aging (Contact Factory) “Blank” = Fixed Frequency “E” = Tri-State MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 Rev: 10/23/2014 CMO3 Series 3.3V 5x7mm Surface Mount Crystal Clock Oscillators CMO3 Series PIN 5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator THIS PRODUCT IS NOT RECOMMENDED FOR PLEASE REFER TO THE M2 PRODUCT OUTPUT WAVEFORM FUNCTION 1 N/C / Tri-State 2 Ground 3 Output NEW DESIGNS. + VCC 4 SERIES. TEST CIRCUIT DIAGRAM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II 2 KV to 4 KV Threshold Solderability Hermeticity MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Resistance to Soldering Lead Integrity MIL-STD-202, Mtd 210D, Cond. J 235°C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress Marking Permanence Life Test MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents 125°C, powered, 1000 hours minimum 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 800-888-1499 or www.champtech.com 2 herein without notice. No liability is assumed as a result of their use or application. MtronPTI reserves the right to make changes to the product(s) and service(s) described Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 09-26-14 MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.