M630x Series 5x7 mm, 1.8/2.5/3.3 V, LVPECL/LVDS/CML/CMOS, TCXO/TCVCXO Ordering Information M6300 2 J B V P N 00.0000 MHz Product Series M6300 = 3.3 V M6301 = 2.5 V M6302 = 1.8 V Temperature Range 1: 0 °C to +70 °C 6: -20 °C to +70 °C 2: -40 °C to +85 °C Stability Features: G: ±0.5 ppm H: ±2.5 ppm • Superior Jitter Performance (comparable to SAW based) • Frequencies from 50 MHz to 1.4 GHz • Designed for a short 2 week cycle time K: ±2.0 ppm E: ±10 ppm Enable/Disable Function Output Type F: No Voltage Control (TCXO) V: Voltage Control (TCVCXO) • Telecommunications such as SONET / SDH / DWDM / FEC / SERDES / OC-3 thru OC-192 • Wireless base stations / WLAN / Gigabit Ethernet • Avionic flight controls and military communications PIN 1 ENABLE J: ±1.0 ppm L: ±4.6 ppm B: Enable High (Pad 1) G: Enable High (Pad 2) S: Enable Low (Pad 1) M: Enable Low (Pad 2) U: No Enable/Disable Function Applications: Output Waveform P: LVPECL L: LVDS M: CML C: CMOS Package/Lead Configurations N: Leadless Ceramic (9 Pad) C: Leadless Ceramic (6 Pad) Frequency (customer specified) M6300Sxxx, M6301Sxxx & M6302Sxxx - Custom datasheets. PIN 2 ENABLE Pad 1: Enable/Disable Pad 2: N/C Pad 3: GND Pad 4: Output Q (LVPECL, LVDS, CML, CMOS) Pad 5: Output Q ¯ (LVPECL, LVDS, CML) Pad 6: VCC Temperature vs. Stability 0 °C to +70 °C -20 °C to +70 °C -40 °C to +85 °C -55 °C to +105 °C -55 °C to +125 °C 3: -55 °C to +105 °C 4: -55 °C to +125 °C ±0.5 ppm ±1.0 ppm A A N A N A N N N N A = Available N = Contact Factory Pad 1: N/C, V Control Pad 2: Enable/Disable Pad 3: GND Pad 4: Output Q (LVPECL, LVDS, CML, CMOS) Pad 5: Output Q ¯ (LVPECL, LVDS, CML) Pad 6: VCC ±2.0 ppm A A A N N ±2.5 ppm A A A N N ±4.6 ppm A A A A A MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Rev: 10/14/2013 M630x Series Electrical Specifications 5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/CMOS, TCXO/TCVCXO Parameter Frequency Range Symbol FR Initial Accuracy Frequency Stability Frequency Vs. Aging FI ∆FT/F ∆FTIME/F Frequency Vs. Supply Voltage Frequency Vs. Reflow Frequency Vs. Load Operating Temperature Storage Temperature Operating Voltage ∆FVDD/F ∆FLOAD/F TA TSTG VCC/VS/VDD Operating Current ICC Rise/Fall Time tR/tF Logic “1” Level VOH Logic “0” Level VOL Min. Typ. Max. 50 1400 50 135 -1 +1 See Ordering Information -3 -1 ±0.40 ±0.75 ±0.20 See Ordering Information -55 3.135 2.375 1.71 VCC - 1.02 90 VCC - 1.63 Common Mode Output Voltage Symmetry (Duty Cycle) VCM tDC VC 1.2 45 45 45 0.7 ±5 0.18 0.25 0.30 Output Skew Output Load Enable/Disable Function (Option B or G) Enable/Disable Function (Option S or M) Phase Noise (Typical) @ 622.080 MHz (LVPECL) @ 100.000 MHz (HCMOS) @ 50.000 MHZ (HCMOS) Environmental +125 3.465 2.625 1.89 125 100 110 90 0.35 6 3.3 2.5 1.8 10 Output Voltage Level Tuning Range Voltage Control Range Note Note Note Note +3 +1 0.95 55 55 55 1.2 0.90 1.62 1.25 2.25 1.65 3.00 20 15 20 50 Ω to (VCC - 2) VDC 100 Ω Differential 15 pF 80 0.5 0.5 80 10 Hz -60 -70 -77 100 Hz -90 -103 -109 1 kHz -120 -123 -129 10 kHz -127 -131 -137 Units MHz MHz ppm ppm ppm ppm ppm ppm ppm °C °C V V V mA mA mA mA ns ns V % VDD V % VDD V % % % Conditions/Notes LVPECL, LVDS, CML (See Note 1) CMOS @ +25 °C (Fmax - Fmin)/2 (See Note 2) First year Thereafter (per year) 5% voltage variation 2 reflows max. 5% supply voltage variation M6300 M6301 M6302 LVPECL LVDS CML CMOS LVPECL, LVDS, CML CMOS LVPECL CMOS LVPECL CMOS LVDS @ 50% VDD (CMOS) @ 50% of waveform (LVPECL) @ 1.25 V (LVDS) Vpk-pk CML ppm VCTCXO only (See Note 3) V @ 1.8 V supply (VCTCXO only - Pad 2) V @ 2.5 V supply (VCTCXO only - Pad 2) V @ 3.3 V supply (VCTCXO only - Pad 2) ps LVPECL ps CML ps LVDS LVPECL (See Note 4) LVDS, CML (See Note 4) CMOS (See Note 4) % Output Enabled V Output Disabled V Output Enabled % Output Disabled 100 kHz Offset from carrier -133 dBc/Hz -136 dBc/Hz -141 dBc/Hz Per MIL-STD-202, Method 213, Condition C Shock Per MIL-STD-202, Methods 201 & 204 Vibration Per EIAJ-STD-002 Solderability -8 Hermeticity 1 X 10 atm cc/sec of helium (Crystal only) Per MIL-STD-883, Method 1011, Condition A Thermal Shock Per MIL-STD-883, Method 1010, Condition B Thermal Cycle 1: Contact factory for frequencies over 945 MHz. 2: Contact factory for less than ±1 ppm frequency stability. 3: Contact factory for other tuning range options. 4: Refer to the load circuit diagram in this data sheet. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Load Circuit Diagrams Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.