M630x Series 5x7 mm, 1.8/2.5/3.3 V, LVPECL/LVDS/CML/CMOS, TCXO/TCVCXO Ordering Information QiK Chip™ M6300 2 J B V P N 00.0000 MHz Product Series M6300 = 3.3 V M6301 = 2.5 V M6302 = 1.8 V Temperature Range 1: 0 °C to +70 °C 6: -20 °C to +70 °C 2: -40 °C to +85 °C Stability Features: G: ±0.5 ppm H: ±2.5 ppm • TCXO/TCVCXO Featuring QiK Chip Technology • Superior Jitter Performance (comparable to SAW based) • Frequencies from 50 MHz to 1.4 GHz • Designed for a short 2 week cycle time TM J: ±1.0 ppm L: ±4.6 ppm K: ±2.0 ppm E: ±10 ppm Enable/Disable Function B: Enable High (Pad 1) G: Enable High (Pad 2) S: Enable Low (Pad 1) M: Enable Low (Pad 2) U: No Enable/Disable Function Output Type F: No Voltage Control (TCXO) V: Voltage Control (TCVCXO) Output Waveform Applications: P: LVPECL • Telecommunications such as SONET / SDH / DWDM / FEC / SERDES / OC-3 thru OC-192 • Wireless base stations / WLAN / Gigabit Ethernet • Avionic flight controls and military communications PIN 1 ENABLE L: LVDS M: CML C: CMOS Package/Lead Configurations N: Leadless Ceramic (9 Pad) C: Leadless Ceramic (6 Pad) Frequency (customer specified) M6300Sxxx, M6301Sxxx & M6302Sxxx - Custom datasheets. PIN 2 ENABLE Pad 1: Enable/Disable Pad 2: N/C Pad 3: GND Pad 4: Output Q (LVPECL, LVDS, CML, CMOS) Pad 5: Output Q ¯ (LVPECL, LVDS, CML) Pad 6: VCC Temperature vs. Stability 0 °C to +70 °C -20 °C to +70 °C -40 °C to +85 °C -55 °C to +105 °C -55 °C to +125 °C 3: -55 °C to +105 °C 4: -55 °C to +125 °C ±0.5 ppm ±1.0 ppm A A N A N A N N N N A = Available N = Contact Factory Pad 1: N/C, V Control Pad 2: Enable/Disable Pad 3: GND Pad 4: Output Q (LVPECL, LVDS, CML, CMOS) Pad 5: Output Q ¯ (LVPECL, LVDS, CML) Pad 6: VCC ±2.0 ppm A A A N N ±2.5 ppm A A A N N ±4.6 ppm A A A A A MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Rev: 05/22/2013 M630x Series 5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/CMOS, TCXO/TCVCXO Parameter Frequency Range Operating Temperature Storage Temperature Frequency Stability Frequency Tolerance at +25°C Frequency Vs. Aging Symbol F TA TSTG Frequency Vs. Supply Voltage Frequency Vs. Reflow Frequency Vs. Load Operating Voltage Electrical Specifications Operating Current Vcc/Vs/Vdd ICC Rise/Fall Time Tr/Tf Logic “1” Level VOH Logic “0” Level VOL Common Mode Output Voltage Symmetry (Duty Cycle) Vcm Output Voltage Level Tuning Range Voltage Control Range Output Skew Output Load 50 to (VCC-2) VDC 100 Differential 15 80% Enable/Disable Function 10 Hz -60 -73 -80 80% 100 Hz -90 -97 -102 1 kHz -120 -123 -130 Units MHz MHz °C °C ppm ppm ppm ppm ppm ppm ppm V V V mA mA mA mA ns ns V V V V V % % % Vp-p ppm V ps ps ps pF 0.5 0.5 V V 10 kHz -127 -131 -137 100 kHz -133 -136 -141 Conditions/Notes LVPECL, LVDS, CML (Note 4) CMOS (Fmax - Fmin)/2 See Note 1 See Note 1 st 1 year Per year thereafter. 5% voltage variation 2 reflows max. 5% supply voltage variation M6300 M6301 M6302 LVPECL LVDS CML CMOS PECL, LVPECL, LVDS CMOS LVPECL CMOS LVPECL CMOS LVDS @ 50% Vdd (CMOS) @ 50% of waveform (LVPECL) @ 1.25 V (LVDS) CML VCTCXO only. See Note 2. VCTCXO. Pad 2 only. LVPECL CML LVDS See Note 3 LVPECL LVDS, CML CMOS Outputs enabled (Option B or G) Outputs disabled Outputs enabled (Option S or M) Outputs disabled Offset from carrier dBc/Hz dBc/Hz dBc/Hz Environmental Phase Noise (Typical) @ 622.080 MHz (LVPECL) @ 100.000 MHz (HCMOS) @ 50.000 MHZ (HCMOS) Min. Typ. Max. 50 1400 50 135 See Ordering Information -55 +125 See Ordering Information -1.0 +1.0 -3.0 + 3.0 -1.0 + 1.0 ± 0.4 ± 0.75 ± 0.2 3.135 3.3 3.465 2.375 2.5 2.625 1.71 1.8 1.89 125 100 110 90 0.35 6 VCC-1.02 90% Vdd VCC-1.63 10% Vdd 1.2 45 55 45 55 45 55 0.7 0.95 1.2 ±5 0.3 1.35 3.0 20 15 20 Shock Per MIL-STD-202, Method 213, Condition C Vibration Per MIL-STD-202, Methods 201 & 204 Solderability Per EIAJ-STD-002 -8 Hermeticity 1 X 10 atm cc/sec of helium (Crystal only) Thermal Shock Per MIL-STD-883, Method 1011, Condition A Thermal Cycle Per MIL-STD-883, Method 1010, Condition B Note 1: Contact factory for less than ± 1ppm frequency stability. Note 2: Contact factory for other Tuning Range options. Note 3: See Load Circuit Diagram in this data sheet. Note 4: Contact factory for frequencies over 945 MHz. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Load Circuit Diagrams Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.