, One. ^zmi-Con TELEPHONE: (973) 376-2922 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 (212)227-6005 FAX: (973) 376-8960 U.S.A. TRANSZORB® Transient Voltage Suppressors P4KE6.8A thru P4KE540A FEATURES • Glass passivated chip junction DO-204AL (DO-41) • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time PRIMARY CHARACTERISTICS VWM 5.8 V to 459 V VBR uni-directional 6.8 V to 540 V VBR bi-directional 6.8 V to 440 V PPPM 400 W PD 1.5W IFSM (uni-directional only) 40 A Tj max. 175°C Polarity Uni-directional, bi-directional Package DO-204AL (DO-41) • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional types, use CA suffix (e.g. P4KE440CA). Electrical characteristics apply in both directions. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Peak pulse power dissipation with a 10/1000 us waveform(1) (fig.1) PPPM 400 W Peak pulse current with a 10/1000 us waveform (1> IPPM See next table A Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) PD 1.5 W Peak forward surge current 8.3 ms single half-sine wave uni-directional only <2* 'FSM 40 A Maximum instantaneous forward voltage at 25 A for uni-directional only <3) Operating junction and storage temperature range VF 3.5/5.0 V TJ. TSTG -5510 + 175 °C Notes (1> Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 P) 8.3 ms single half-sine wave or equivalent square wave, duty cycle = 4 pulses per minute maximum <3> VF = 3.5 V for P4KE220A and below; VF = 5.0 V for P4KE250A and above Quality Semi-Conductors ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE P4KE6.8A P4KE7.5A P4KE8.2A P4KE9.1A P4KE10A P4KE11A P4KE12A P4KE13A P4KE15A P4KE16A P4KE18A P4KE20A P4KE22A P4KE24A P4KE27A P4KE30A P4KE33A P4KE36A P4KE39A P4KE43A P4KE47A P4KE51A P4KE56A P4KE62A P4KE68A P4KE75A P4KE82A P4KE91A P4KE100A P4KE110A P4KE120A P4KE130A P4KE150A P4KE160A BREAKDOWN VOLTAGE VBRATIT<1> (V) MIN. MAX. 6.45 7.13 7.79 8.65 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21.0 23.1 25.2 28.4 31.5 34.7 37.8 41.0 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID<3> (MA) MAXIMUM PEAK PULSE CURRENT IPPM12' (A) 38.1 35.4 33.1 29.9 27.6 25.6 24.0 . 22.0 18.9 17.8 15.9 14.4 13.1 12.0 10.7 MAXIMUM CLAMPING VOLTAGE AT IPPM VC(V) MAXIMUM TEMPERATURE COEFFICENT ATVBR (%/°C) 0.057 0.061 0.060 0.068 0.073 10 10 10 1.0 1.0 5.80 1000 6.40 500 7.02 200 50 8.55 10 1.0 9.40 5.0 1.0 10.2 1.0 1.0 11.1 1.0 1.0 12.8 1.0 1.0 13.6 1.0 1.0 15.3 1.0 1.0 17.1 1.0 1.0 1.0 18.8 1.0 20.5 1.0 1.0 23.1 1.0 1.0 25.6 1.0 9.7 1.0 28.2 1.0 8.8 1.0 30.8 1.0 8.0 1.0 33.3 1.0 7.4 1.0 36.8 1.0 6.7 1.0 40.2 1.0 6.2 1.0 43.6 1.0 5.7 1.0 47.8 1.0 5.2 1.0 53.0 1.0 4.7 1.0 58.1 1.0 4.3 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 1.0 64.1 1.0 3.9 103 1.0 70.1 1.0 3.5 113 1.0 77.8 1.0 3.2 105 1.0 85.5 1.0 2.9 125 137 105 114 116 1.0 94.0 1.0 2.6 152 126 1.0 102 1.0 2.4 165 124 137 1.0 111 1.0 2.2 179 143 158 1.0 128 1.0 1.9 207 1.0 1.8 219 1.0 1.7 234 1.0 1.6 1.0 1.5 246 274 1.0 1.2 328 1.0 1.2 344 1.0 1.00 0.83 0.73 0.66 0.61 0.57 0.54 414 9.5 10.5 11.4 12.4 14.3 15.2 17.1 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95.0 7.78 152 168 1.0 136 162 179 1.0 145 P4KE170A P4KE180A 171 154 189 1.0 P4KE200A 190 171 210 1.0 P4KE220A 209 1.0 231 185 214 P4KE250A 237 1.0 263 P4KE300A 285 315 1.0 256 P4KE350A 333 368 1.0 300 P4KE400A 380 1.0 342 420 P4KE440A 418 1.0 462 376 P4KE480A 456 504 1.0 408 P4KE510A 485 535 1.0 434 P4KE540A 513 567 1.0 459 Notes 0) Pulse test: tp < 50 ms (2> Surge current waveform per fig. 3 and derate per fig. 2 <3> For bi-directional types with VWM of 10 V and less the ID limit is doubled '4> All terms and symbols are consistent with ANSI/EEE CA62.35 1.0 1.0 1.0 1.0 1.0 1.0 482 548 602 658 698 740 0.075 0.078 0.081 0.084 0.086 0.088 0.090 0.092 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 P4KE6.8A thru P4KE540A THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER VALUE SYMBOL Typical thermal resistance, junction to lead Typical thermal resistance, junction to ambient L[_6ad = 10 mm RejL 66 RBJA 100 UNIT °c/w ORDERING INFORMATION (Example) PREFERRED PIN UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE P4KE6.8A-E3/54 0.350 54 5500 13" diameter paper tape and reel P4KE6.8AHE3/54 (1) 0.350 54 5500 13" diameter paper tape and reel Note (1>AEC-Q101 qualified PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) WIN. 1.0(25.4) MIN. 0.034 (0.86) 0.028(0.71) DIA.