OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: [email protected] Series 440 - Ceramics IR high intensity 880 nm Features - size 3.8(L) x 3.8(W) x 0.9(H) mm circuit substrate: AlN Ceramics devices are ROHS conform lead free solderable. soldering pads: silver plated taped in 16 mm blister tape. cathode to transporting perforation - all devices sorted into luminous intensity classes - taping: face-up (T) - high radiation intensity type Absolute Maximum Ratings IF, max[mA] 350 IF,P [mA] tp 100 s=1: 10 350 VR [V] IR, max [A] 5 100 Thermal resistance R thJC [K / W] 10 TOp [C] TSt [C] -40...85 -45...85 400 350 300 IF [mA] 250 Maximal forward current (DC) characteristic 200 150 100 50 0 -40 -20 0 20 40 60 80 100 Top[°C] Electro-Optical Characteristics Type OCI-440 880 Marking at anode Measurement Switching time (rise & fall) IF [mA] typ [ns] max [ns] 350 VF[V] typ max 1.5 2.0 p [nm] 875 ±10 Ie[mW/sr] min typ 20 30 © 2010 OSA Opto Light GmbH · Tel. +49-(0)30-65 76 26 83 · Fax +49-(0)30-65 76 26 81 · [email protected] edition 11/10 90 120 1,0 60 30 150 0,5 view angle 0,0 180 0 IF (mA) 100 U F – IF characteristic 10 1 1,1 1,2 1,3 1,4 1,5 1,6 UF (V) Iv rel (at 350 mA ) 1,0 IF – Ie, rel characteristic 0,5 0,0 0 50 100 150 200 250 300 350 400 IF (mA) © 2010 OSA Opto Light GmbH · Tel. +49-(0)30-65 76 26 83 · Fax +49-(0)30-65 76 26 81 · [email protected] edition 11/10 Outline Drawing Recommended Soldering Patterns Soldering Conditions 300 Temperature (°C) 250 10-20 s 230°C 200 150 IR reflow soldering profile Max. 40 s 100 50 0 50 100 150 200 Time (sec) 250 300 IR reflow soldering profile for lead free soldering Manual soldering: max power of iron 25W/ 3s/ 300°C © 2010 OSA Opto Light GmbH · Tel. +49-(0)30-65 76 26 83 · Fax +49-(0)30-65 76 26 81 · [email protected] edition 11/10 Ordering Code For Parts Series Color OCI-440 - ??????? Encapsulation - X - Packaging T T - taped X - uncolored clear Type definition, e.g. OCI-440 880-X -T LED Luminous Intensity Groups And Subgroups [ mW/sr ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: M: N: P: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18 28 45 - 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 28 45 71 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 - 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 - 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. © 2010 OSA Opto Light GmbH · Tel. +49-(0)30-65 76 26 83 · Fax +49-(0)30-65 76 26 81 · [email protected] edition 11/10 Tape And Reel Packing D 180 mm 330 mm Packing: Parts/reel 500 2000 The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. XXXXXXXXX Type OCI-440 ?????-??-T Intensity group ZZ Charge No. 1122-AAAAAA Quantity 9999 Customer order No. 11 Week – 22 year – A internal identification Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. OSA opto light does not have the responsibility for the reliability and the degradation behaviour of products made with OSA opto light diodes because they depend not only on the diode but also on the conditions of manufacture or design of the final products. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose! © 2010 OSA Opto Light GmbH · Tel. +49-(0)30-65 76 26 83 · Fax +49-(0)30-65 76 26 81 · [email protected] edition 11/10 © 2010 OSA Opto Light GmbH · Tel. +49-(0)30-65 76 26 83 · Fax +49-(0)30-65 76 26 81 · [email protected]