OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: [email protected] preliminary Series 604 - High current, PLCC2 size Features - size 1210: 3,3(L) x 2,9(W) x 1,4(H) mm - high current up to 200 mA - soldering pads: gold plated, all soldering methods applicable - taped in 8 mm blister tape, cathode to transporting perforation - all devices sorted into luminous intensity classes - high radiation intensity types Absolute Maximum Ratings IF, max[mA] 200 IF,P [mA] tp ≤ 100 µs τ=1: 10 1000 VR [V] IR, max [µA] 5 100 Thermal resistance R thJA [K / W] 24 TOp [°C] TSt °[C] -40...85 -55...85 200 180 160 IF [mA] 140 Maximal forward current (DC) characteristic 120 100 80 60 40 20 0 -40 -20 0 20 40 60 80 Top[°C] Electro-Optical Characteristics Type OHL-604 870F OHL-604 870 OHL-604 870H Marking at cathode cathode cathode Measurement Switching time (rise & fall) IF [mA] typ [ns] max [ns] 200 5 8 200 25 30 200 30 80 VF[V] typ max 1,45 1,75 1,45 1,75 1,45 1,75 λp [nm] 870 ±15 870 ±15 870 ±15 Ie[mW/sr] min typ 5.0 10 8.8 18 10 20 © 2006 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] preliminary edition 02/06 90 120 1,0 60 150 30 0,5 view angle 0,0 180 0 IF (mA) 100 870H UF – IF characteristic 10 1 1,2 1,3 1,4 UF (V) 1 Ie rel (at 200 mA ) 870H IF – Ie, rel characteristic 0 50 100 150 200 IF (mA) © 2006 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] preliminary edition 02/06 Outline Drawing Recommended Soldering Patterns Soldering Conditions 300 250 Temperature (°C) 10-20 s 230°C 200 150 IR reflow soldering profile Max. 40 s 100 50 0 50 100 150 200 250 300 Time (sec) IR reflow soldering profile for lead free soldering Manual soldering: max power of iron 25W/ 3s/ 300°C © 2006 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] preliminary edition 02/06 Ordering Code For Parts Series Color OHL-604 - ??????? Encapsulation - X - Packaging T T - taped X - uncolored clear Type definition, e.g. OHL-604 870F-X -T LED Luminous Intensity Groups And Subgroups [ mW/sr ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: M: N: P: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18 28 45 - 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 28 45 71 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 - 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 - 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. © 2006 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] preliminary edition 02/06 Tape And Reel Packing D 180 mm 330 mm Packing: Parts/reel 2000 8000 The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. XXXXXXXXX Type OHL-604 ?????-??-T Intensity group ZZ Charge No. 1122-AAAAAA Quantity 9999 Customer order No. 11 Week – 22 year – A internal identification Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose! © 2006 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected]