OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: [email protected] Series 150 - 1206 Standard IR high intensity 880 nm Features - size 1206: 3,2(L) x 1,6(W) x 1,2(H) mm circuit substrate: glass laminated epoxy devices are ROHS conform lead free solderable, soldering pads: gold plated taped in 8 mm blister tape, cathode to transporting perforation - all devices sorted into luminous intensity classes - taping: face-up (TU) or face-down (TD) possible - high radiation intensity type Absolute Maximum Ratings IF, max[mA] 50 IF,P [mA] tp ≤ 100 µs τ=1: 10 250 VR [V] IR, max [µA] 5 100 Thermal resistance R thJA [K / W] 450 TOp [°C] TSt °[C] -40...85 -55...85 50 40 IF [mA] 30 Maximal forward current (DC) characteristic 20 10 0 -40 -20 0 20 40 Top[°C] 60 80 100 Electro-Optical Characteristics Type OIS-150 880 Marking at cathode Measurement Switching time (rise & fall) IF [mA] typ [ns] max [ns] 50 20 80 VF[V] typ max 1,4 1,7 λp [nm] 875 ±15 Ie[mW/sr] min typ 1.2 2.5 © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 02/08 90 120 1,0 60 150 30 0,5 view angle 0,0 180 0 IF (mA) 10 UF – IF characteristic 880 1 1,0 1,1 1,2 1,3 1,4 UF (V) 5 Ie rel (at 10 mA ) 4 880 3 IF – Ie, rel characteristic 2 1 10 20 30 40 50 IF (mA) © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 02/08 Outline Drawing Recommended Soldering Patterns Soldering Conditions 300 250 Temperature (°C) 10-20 s 230°C 200 150 IR reflow soldering profile Max. 40 s 100 50 0 50 100 150 200 250 300 Time (sec) IR reflow soldering profile for lead free soldering Manual soldering: max power of iron 25W/ 3s/ 300°C © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 02/08 Ordering Code For Parts Series Color OIS-150 - ??????? Encapsulation - X - Packaging ? TU - taped up TD - taped down X - uncolored clear Type definition, e.g. OIS-150 880-X -TU LED Luminous Intensity Groups And Subgroups [ mW/sr ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: M: N: P: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18 28 45 - 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 28 45 71 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 - 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 - 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] edition 02/08 Tape And Reel Packing D 180 mm 330 mm Packing: Parts/reel 3000 12000 The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. XXXXXXXXX Type OIS-150 ?????-??-T Intensity group ZZ Charge No. 1122-AAAAAA Quantity 9999 Customer order No. 11 Week – 22 year – A internal identification Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose! © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected]