ALUMINUM ELECTROLYTIC CAPACITORS AK Snap-in Terminal Type, 105°C Permissible Abnormal Voltage series Withstanding 2000 hours application of rated ripple current at 105°C. Extended voltage range at 200V, 400V and 420V. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Compliant the RoHS directive (2011/65/EU). AK Smaller AQ Specifications Performance Characteristics Item Category Temperature Range – 25 to +105°C Rated Voltage Range 200 Rated Capacitance Range 33 to31200µF CV Capacitance Tolerance 3 atCV ± 20% 120Hz, 20°C Leakage Current I Tangent of loss angle (tan δ) 0.20MAX. 120Hz at 20°C Rated voltage(V) Impedance ratio (MAX) Z – 25°C/Z+20°C Stability at Low Temperature 400 420V 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 400 200 8 420 Measurement frequency : 120Hz 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. Capacitance change tan δ Leakage current Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value Safety Performance The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and/or case. rating test conditions Voltage (V) Capacitance (µF) Limited DC current Test voltage 330 C < 330 4A 330 C < 470 200 300VDC and 375VDC 5A 470 C < 470 7A 330 C < 100 2A 100 C < 220 400 500VDC and 600VDC 4A 220 C < 470 7A 330 C < 100 2A 100 C < 220 420 520VDC and 630VDC 4A 220 C < 470 7A Marking Printed with white color letter on black sleeve Drawing Type numbering system (Example : 200V 680µF) Bottom plate (code ZB only) Polarity bar Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 φ D +1MAX. L A K 2 D 6 8 1 ME L A 5 0 Bottom Plate Case length code Case dia. code 10 Configuration L±2 Capacitance tolerance (±20%) 4.0±0.5 Pressure relief vent Rated capacitance (680µF) 0.8 .2 +0 .1 -0 Rated voltage (200V) Code Z A B C With Bottom Plate Without code less Bottom Plate Series name Type Please contact to us if other configurations are required. 2-2φ±0.1 (PC board hole dimensions) +0.2 -0.1 2.5 10 ± 0.1 4.0±0.5 0.8 φD 22 25 30 35 ZB 1.5 +0.2 -0.1 (Terminal dimensions) Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS AK series Dimensions 200V (2D) Cap. (µF) 400V (2G) Size φD × L(mm) Ripple (mA) Leakage Current × 20 × 20 25 × 20 22 × 25 30 × 20 22 × 25 22 × 30 25 × 25 35 × 20 22 × 30 25 × 30 30 × 25 22 × 35 25 × 30 30 × 25 22 × 40 25 × 35 30 × 25 22 × 45 25 × 40 30 × 35 35 × 25 25 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 50 0.29 Cap. (µF) Size φD × L(mm) 47 22 350 LAK2D470MELZ20 33 22 Ripple (mA) 220 100 22 500 0.42 LAK2D101MELZ20 39 22 300 0.37 650 0.51 LAK2D151MELA20 350 0.41 LAK2G470MELZ25 700 0.56 LAK2D181MELZ25 350 0.41 LAK2G470MELA20 700 0.56 LAK2D181MELB20 400 0.41 LAK2G470MELB20 740 0.62 LAK2D221MELZ25 380 0.44 LAK2G560MELZ25 900 0.69 LAK2D271MELZ30 380 0.44 LAK2G560MELA20 400 0.49 LAK2G680MELZ25 450 0.49 LAK2G680MELA25 500 0.49 LAK2G680MELB20 500 0.54 LAK2G820MELZ30 500 0.54 LAK2G820MELA25 500 0.54 LAK2G820MELB20 550 0.60 LAK2G101MELZ35 530 0.60 LAK2G101MELA30 530 0.60 LAK2G101MELB25 550 0.60 LAK2G101MELC20 600 0.65 LAK2G121MELZ40 600 0.65 LAK2G121MELA30 600 0.65 LAK2G121MELB25 700 0.73 LAK2G151MELZ45 700 0.73 LAK2G151MELA35 700 0.73 LAK2G151MELB30 700 0.73 LAK2G151MELC25 800 0.80 LAK2G181MELZ50 800 0.80 LAK2G181MELA40 800 0.80 LAK2G181MELB30 800 0.80 LAK2G181MELC25 900 0.88 LAK2G221MELA45 900 0.88 LAK2G221MELB35 900 0.88 LAK2G221MELC30 980 0.98 LAK2G271MELB40 960 0.98 LAK2G271MELC35 1210 1.08 LAK2G331MELB50 1210 1.08 LAK2G331MELC40 1320 1.18 LAK2G391MELC45 1450 1.30 LAK2G471MELC50 150 180 220 270 330 390 470 560 680 820 1000 1200 (mA) Code 850 0.69 LAK2D271MELA25 1100 0.69 LAK2D271MELC20 1050 0.77 LAK2D331MELZ30 1050 0.77 LAK2D331MELA30 1050 0.77 LAK2D331MELB25 1200 0.83 LAK2D391MELZ35 1200 0.83 LAK2D391MELA30 1200 0.83 LAK2D391MELB25 1300 0.91 LAK2D471MELZ40 1300 0.91 LAK2D471MELA35 1350 0.91 LAK2D471MELB25 1500 1.00 LAK2D561MELZ45 1500 1.00 LAK2D561MELA40 1550 1.00 LAK2D561MELB35 1550 1.00 LAK2D561MELC25 1700 1.10 LAK2D681MELA50 1700 1.10 LAK2D681MELB40 1700 1.10 LAK2D681MELC30 1990 1.21 LAK2D821MELB45 1990 1.21 LAK2D821MELC35 2100 1.34 LAK2D102MELB50 2100 1.34 LAK2D102MELC40 2300 1.46 LAK2D122MELC50 420V (W6) Cap. (µF) 33 47 56 68 82 100 120 150 180 220 270 330 Size φD × L(mm) Ripple (mA) Leakage Current × 25 22 × 25 22 × 25 22 × 30 25 × 25 22 × 35 25 × 30 22 × 40 25 × 30 30 × 25 22 × 45 25 × 35 30 × 30 35 × 25 25 × 40 30 × 30 35 × 25 25 × 45 30 × 35 35 × 30 30 × 40 35 × 35 30 × 45 35 × 40 35 × 45 250 0.35 LAKW6330MELZ25 350 0.42 LAKW6470MELZ25 380 0.46 LAKW6560MELZ25 450 0.50 LAKW6680MELZ30 450 0.50 LAKW6680MELA25 640 0.55 LAKW6820MELZ35 640 0.55 LAKW6820MELA30 690 0.61 LAKW6101MELZ40 690 0.61 LAKW6101MELA30 690 0.61 LAKW6101MELB25 750 0.67 LAKW6121MELZ45 750 0.67 LAKW6121MELA35 750 0.67 LAKW6121MELB30 750 0.67 LAKW6121MELC25 820 0.75 LAKW6151MELA40 820 0.75 LAKW6151MELB30 820 0.75 LAKW6151MELC25 900 0.82 LAKW6181MELA45 900 0.82 LAKW6181MELB35 900 0.82 LAKW6181MELC30 1000 0.91 LAKW6221MELB40 1000 0.91 LAKW6221MELC35 1100 1.01 LAKW6271MELB45 1100 1.01 LAKW6271MELC40 1.11 LAKW6331MELC45 22 1200 (mA) Code Rated ripple current (mArms) at 105°C 120Hz 47 56 68 82 100 120 150 180 220 270 330 390 470 × 20 × 20 22 × 25 25 × 20 30 × 20 22 × 25 25 × 20 22 × 25 25 × 25 30 × 20 22 × 30 25 × 25 30 × 20 22 × 35 25 × 30 30 × 25 35 × 20 22 × 40 25 × 30 30 × 25 22 × 45 25 × 35 30 × 30 35 × 25 22 × 50 25 × 40 30 × 30 35 × 25 25 × 45 30 × 35 35 × 30 30 × 40 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 Leakage Current 0.34 LAK2G330MELZ20 LAK2G390MELZ20 Code (mA) Frequency coefficient of rated ripple current Frequency (Hz) 200V Coefficient 400 • 420V 50 0.85 0.88 60 0.88 0.90 120 1.00 1.00 1k 1.15 1.10 10k or more 1.20 1.15 CAT.8100D