Snap-In Aluminum Electrolytic Capacitors ELG Series, +105ºC Overview Applications KEMET's ELG Series of aluminum electrolytic snap-in capacitors are designed with snap-lock terminals for printed circuit board mounting. The case is aluminum with an insulated sleeve and safety vent at the bottom. Typical applications include general purpose power electronics, UPS, SMPS and battery chargers. Benefits • • • • Suited for high reliability, low ESR applications Operating temperature of up to 105°C 2,000 hour operating life RoHS Compliant and lead-free Part Number System ELG 129 M 6R3 A Q1 AA Series Capacitance Code (pF) Tolerance Rated Voltage (VDC) Electrical Parameters Size Code Packaging Snap-In Aluminum Electrolytic Digits 4 – 5 represent the first two digits of the capacitance value. The final digit indicates the number of zeros to be added. M = ±20% See Dimension Table See Ordering Options Table 6R3 = 6.3 010 = 10 016 = 16 025 = 25 035 = 35 050 = 50 063 = 63 080 = 80 100 = 100 160 = 160 180 = 180 200 = 200 250 = 250 350 = 350 400 = 400 450 = 450 A = Standard Ordering Options Table Packaging Type Lead Length (mm) Lead and Packaging Code Standard Bulk Packaging Options Bulk (box) 5.8 ± 1.0 AA Bulk (box) 4.0 ± 0.2 AV One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 1 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Dimensions – Millimeters Safety vent L 0.8 ±0.1 0.8 ±0.1 3 ±0.5 D 5.8±1 1.5 +/-0.1 5.8 ±1 Insulated Sleeve d Size Code PCB Layout P D L p Nominal Tolerance Nominal Tolerance Nominal Tolerance Q7 Q1 Q2 Q3 Q4 Q5 Q6 R7 R1 R2 R3 R4 R5 R6 S1 S2 22 22 22 22 22 22 22 25 25 25 25 25 25 25 30 30 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 20 25 30 35 40 45 50 20 25 30 35 40 45 50 25 30 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 S3 S4 S5 S6 T1 T2 T3 T4 T5 T6 T8 30 30 30 30 35 35 35 35 35 35 35 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 35 40 45 50 25 30 35 40 45 50 60 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 +2.0/-0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 2 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Performance Characteristics Item Performance Characteristics Capacitance Range Capacitance Tolerance 560 – 82,000 µF ±20% at 120 Hz / 20°C Rated Voltage Life Test 6.3 – 100 VDC 160 – 450 VDC 2,000 hours (see conditions in Test Methods & Performance) Operating Temperature Leakage Current 47 – 2,200 µF -40°C to +105°C -25°C to +105°C I = 0.02 CV (mA) or 3 mA, whichever is smaller C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at 20°C. Impedance Z Characteristics at 120 Hz Rated Voltage (VDC) 6.3 – 16 25 35 50 – 63 80 – 100 160 – 400 450 Z (-25°C) / Z (20°C) 4 3 3 2 2 4 8 Z (-40°C) / Z (20°C) 15 10 8 6 5 Compensation Factor of Ripple Current (RC) vs. Frequency Rated Voltage (VDC) 50 Hz 60 Hz 120 Hz 1 kHz 10 – 100 kHz 6.3 – 100 0.88 0.90 1.00 1.15 1.16 160 – 250 0.85 0.88 1.00 1.15 1.20 350 – 450 0.88 0.90 1.00 1.10 1.15 Compensation Factor of Ripple Current (RC) vs. Temperature Temperature 40°C 60°C 70°C 85°C 105°C Coefficient 2.47 2.37 2.17 1.67 1.00 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 3 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Test Method & Performance Conditions Load Life Test Shelf Life Test Temperature 105°C 105°C Test Duration 2,000 hours 1,000 hours Ripple Current Maximum ripple current specified at 120 kHz 105°C specified in table No ripple current applied The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor No voltage applied Voltage Performance Capacitance Change Dissipation Factor Leakage Current The following specifications will be satisfied when the capacitor is restored to 20°C: Within ±20% of the initial value Does not exceed 200% of the specified value Does not exceed 150% of the specified value Does not exceed initial requirement Environmental Compliance As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers’ obligations to guarantee their products and fulfill these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. Because of customer requirements, there may appear additional markings such as LF = Lead Free or LFW = Lead Free Wires on the label. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 4 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Table 1A – Ratings & Part Number Reference VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 20 20 20 20 20 20 20 20 12000 15000 15000 18000 18000 22000 22000 22000 27000 27000 27000 27000 33000 33000 33000 33000 39000 39000 39000 47000 47000 56000 56000 68000 68000 82000 10000 12000 15000 15000 18000 18000 22000 22000 22000 27000 27000 27000 27000 33000 33000 33000 39000 39000 39000 47000 47000 56000 56000 68000 6800 8200 8200 10000 10000 12000 12000 12000 22 x 25 22 x 30 25 x 25 22 x 30 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 30 x 30 35 x 25 22 x 45 25 x 40 30 x 30 35 x 25 25 x 50 30 x 35 35 x 30 25 x 50 30 x 40 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 30 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 50 22 x 25 22 x 30 25 x 25 22 x 30 25 x 25 22 x 35 25 x 30 30 x 25 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 1.55 1.70 1.70 1.95 1.95 2.25 2.25 2.30 2.55 2.55 2.55 2.55 2.90 2.95 2.90 2.95 3.25 3.25 3.30 3.70 3.70 4.15 4.10 4.70 4.70 5.30 1.55 1.75 1.90 1.90 2.20 2.25 2.50 2.55 2.45 2.95 2.90 2.85 2.80 3.30 3.30 3.30 3.70 3.70 3.65 4.20 3.80 4.65 4.65 5.50 1.55 1.70 1.70 1.95 1.95 2.20 2.25 2.30 1.5 1.9 1.9 2.3 2.3 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.0 2.4 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.2 2.6 2.6 3.0 3.0 3.0 3.0 3.0 ELG129M6R3AQ1(1) ELG159M6R3AQ2(1) ELG159M6R3AR1(1) ELG189M6R3AQ2(1) ELG189M6R3AR1(1) ELG229M6R3AQ3(1) ELG229M6R3AR2(1) ELG229M6R3AS1(1) ELG279M6R3AQ4(1) ELG279M6R3AR3(1) ELG279M6R3AS2(1) ELG279M6R3AT1(1) ELG339M6R3AQ5(1) ELG339M6R3AR4(1) ELG339M6R3AS2(1) ELG339M6R3AT1(1) ELG399M6R3AR6(1) ELG399M6R3AS3(1) ELG399M6R3AT2(1) ELG479M6R3AR6(1) ELG479M6R3AS4(1) ELG569M6R3AS5(1) ELG569M6R3AT3(1) ELG689M6R3AS6(1) ELG689M6R3AT4(1) ELG829M6R3AT5(1) ELG109M010AQ1(1) ELG129M010AQ2(1) ELG159M010AQ2(1) ELG159M010AR1(1) ELG189M010AQ3(1) ELG189M010AR2(1) ELG229M010AQ4(1) ELG229M010AR3(1) ELG229M010AS1(1) ELG279M010AQ6(1) ELG279M010AR4(1) ELG279M010AS2(1) ELG279M010AT1(1) ELG339M010AR5(1) ELG339M010AS3(1) ELG339M010AT2(1) ELG399M010AR6(1) ELG399M010AS4(1) ELG399M010AT2(1) ELG479M010AS5(1) ELG479M010AT3(1) ELG569M010AS6(1) ELG569M010AT4(1) ELG689M010AT6(1) ELG688M016AQ1(1) ELG828M016AQ2(1) ELG828M016AR1(1) ELG109M016AQ2(1) ELG109M016AR1(1) ELG129M016AQ3(1) ELG129M016AR2(1) ELG129M016AS1(1) VDC VDC Surge Rated Capacitance Case Size DF RC LC Part Number (1) Insert packaging code. See Ordering Options Table for available options. * When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 5 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Table 1A – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 44 44 44 44 44 44 44 44 44 44 44 44 15000 15000 15000 15000 18000 18000 18000 18000 22000 22000 22000 27000 27000 27000 33000 33000 39000 39000 47000 4700 5600 5600 6800 6800 8200 8200 8200 10000 10000 10000 10000 12000 12000 12000 12000 15000 15000 15000 18000 18000 18000 22000 22000 27000 33000 3300 3900 3900 4700 4700 5600 5600 5600 6800 6800 6800 6800 22 x 40 25 x 35 30 x 30 35 x 25 22 x 45 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 30 25 x 25 22 x 30 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 30 x 30 35 x 25 22 x 45 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 35 30 x 45 35 x 35 35 x 45 35 x 50 22 x 25 22 x 30 25 x 25 22 x 35 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 30 x 30 35 x 25 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 35 35 35 35 35 35 35 35 35 35 35 35 2.55 2.60 2.60 2.65 2.90 2.90 2.90 2.95 3.30 3.30 3.30 3.80 3.75 3.75 4.30 4.25 4.80 4.80 5.45 1.50 1.65 1.65 1.85 1.85 2.10 2.10 2.15 2.40 2.40 2.40 2.40 2.70 2.75 2.70 2.75 3.15 3.15 3.25 3.55 3.55 3.55 4.05 3.80 4.70 5.40 1.40 1.55 1.55 1.80 1.80 1.95 1.95 2.00 2.20 2.25 2.30 2.35 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.3 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.3 2.7 2.7 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 ELG159M016AQ4(1) ELG159M016AR3(1) ELG159M016AS2(1) ELG159M016AT1(1) ELG189M016AQ5(1) ELG189M016AR4(1) ELG189M016AS2(1) ELG189M016AT1(1) ELG229M016AR5(1) ELG229M016AS3(1) ELG229M016AT2(1) ELG279M016AR6(1) ELG279M016AS4(1) ELG279M016AT2(1) ELG339M016AS5(1) ELG339M016AT3(1) ELG399M016AS6(1) ELG399M016AT4(1) ELG479M016AT5(1) ELG478M025AQ1(1) ELG568M025AQ2(1) ELG568M025AR1(1) ELG688M025AQ2(1) ELG688M025AR1(1) ELG828M025AQ3(1) ELG828M025AR2(1) ELG828M025AS1(1) ELG109M025AQ4(1) ELG109M025AR3(1) ELG109M025AS2(1) ELG109M025AT1(1) ELG129M025AQ5(1) ELG129M025AR4(1) ELG129M025AS2(1) ELG129M025AT1(1) ELG159M025AR5(1) ELG159M025AS3(1) ELG159M025AT2(1) ELG189M025AR6(1) ELG189M025AS4(1) ELG189M025AT3(1) ELG229M025AS5(1) ELG229M025AT3(1) ELG279M025AT5(1) ELG339M025AT6(1) ELG338M035AQ1(1) ELG388M035AQ2(1) ELG388M035AR1(1) ELG478M035AQ3(1) ELG478M035AR1(1) ELG568M035AQ3(1) ELG568M035AR2(1) ELG568M035AS1(1) ELG688M035AQ4(1) ELG688M035AR3(1) ELG688M035AS2(1) ELG688M035AT1(1) VDC VDC Surge Rated Capacitance Case Size DF RC LC Part Number (1) Insert packaging code. See Ordering Options Table for available options. * When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 6 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Table 1A – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 44 44 44 44 44 44 44 44 44 44 44 44 44 44 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 8200 8200 8200 8200 10000 10000 10000 12000 12000 12000 15000 15000 18000 22000 1800 2200 2200 2700 2700 3300 3300 3900 3900 3900 4700 4700 4700 4700 5600 5600 5600 5600 6800 6800 6800 8200 8200 10000 10000 12000 1200 1500 1500 1800 1800 2200 2200 2200 2700 2700 2700 3300 3300 3300 3300 3900 3900 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 35 x 40 30 x 50 22 x 25 22 x 30 25 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 22 x 45 25 x 40 30 x 30 35 x 25 22 x 50 25 x 40 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 30 25 x 25 22 x 30 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 30 x 25 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 2.55 2.50 2.75 2.75 2.85 2.90 2.95 3.25 3.25 3.15 3.70 3.65 4.35 4.90 1.30 1.55 1.55 1.70 1.70 1.95 1.85 2.15 2.20 1.95 2.45 2.45 2.45 2.50 2.75 2.70 2.75 2.75 3.30 3.30 3.25 3.60 3.55 4.05 4.00 4.55 1.20 1.30 1.30 1.50 1.50 1.70 1.75 1.80 2.00 2.00 1.95 2.30 2.30 2.25 2.10 2.55 2.55 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 1.8 2.2 2.2 2.7 2.7 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 1.5 1.9 1.9 2.3 2.3 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 ELG828M035AQ6(1) ELG828M035AR4(1) ELG828M035AS2(1) ELG828M035AT1(1) ELG109M035AR5(1) ELG109M035AS3(1) ELG109M035AT2(1) ELG129M035AR6(1) ELG129M035AS4(1) ELG129M035AT2(1) ELG159M035AS5(1) ELG159M035AT3(1) ELG189M035AT4(1) ELG229M035AS6(1) ELG188M050AQ1(1) ELG228M050AQ2(1) ELG228M050AR1(1) ELG278M050AQ2(1) ELG278M050AR1(1) ELG338M050AQ3(1) ELG338M050AR2(1) ELG398M050AQ4(1) ELG398M050AR3(1) ELG398M050AS1(1) ELG478M050AQ5(1) ELG478M050AR4(1) ELG478M050AS2(1) ELG478M050AT1(1) ELG568M050AQ6(1) ELG568M050AR4(1) ELG568M050AS3(1) ELG568M050AT2(1) ELG688M050AR6(1) ELG688M050AS4(1) ELG688M050AT2(1) ELG828M050AS5(1) ELG828M050AT3(1) ELG109M050AS6(1) ELG109M050AT4(1) ELG129M050AT5(1) ELG128M063AQ1(1) ELG158M063AQ2(1) ELG158M063AR1(1) ELG188M063AQ2(1) ELG188M063AR1(1) ELG228M063AQ3(1) ELG228M063AR2(1) ELG228M063AS1(1) ELG278M063AQ4(1) ELG278M063AR3(1) ELG278M063AS1(1) ELG338M063AQ6(1) ELG338M063AR4(1) ELG338M063AS2(1) ELG338M063AT1(1) ELG398M063AR5(1) ELG398M063AS3(1) VDC VDC Surge Rated Capacitance Case Size DF RC LC Part Number (1) Insert packaging code. See Ordering Options Table for available options. * When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 7 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Table 1A – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number 63 63 63 63 63 63 63 63 63 63 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 79 79 79 79 79 79 79 79 79 79 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 3900 4700 4700 4700 5600 5600 6800 6800 8200 10000 820 1000 1000 1200 1200 1500 1500 1500 1800 1800 1800 2200 2200 2200 2200 2700 2700 2700 3300 3300 3300 3900 3900 4700 4700 5600 6800 560 680 820 820 1000 1000 1200 1200 1200 1500 1500 1500 1500 1800 1800 1800 2200 2200 2200 2700 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25 x 25 22 x 30 25 x 25 25 x 35 25 x 30 30 x 25 22 x 40 25 x 35 30 x 25 22 x 45 25 x 35 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 22 x 45 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 2.55 2.85 2.85 2.80 3.20 3.20 3.65 3.65 3.90 4.40 1.10 1.20 1.20 1.40 1.40 1.60 1.60 1.65 1.80 1.85 1.80 2.05 2.00 2.05 2.05 2.35 2.35 2.35 2.70 2.70 2.55 3.00 3.00 3.40 3.40 3.80 3.90 1.05 1.20 1.30 1.33 1.50 1.50 1.70 1.70 1.70 1.95 2.00 1.95 2.00 2.20 2.50 2.45 2.55 2.70 2.55 2.90 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 1.3 1.6 1.6 1.9 1.9 2.4 2.4 2.4 2.9 2.9 2.9 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 1.1 1.4 1.6 1.6 2.0 2.0 2.4 2.4 2.4 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 ELG398M063AT2(1) ELG478M063AR6(1) ELG478M063AS4(1) ELG478M063AT2(1) ELG568M063AS5(1) ELG568M063AT3(1) ELG688M063AS6(1) ELG688M063AT4(1) ELG828M063AT5(1) ELG109M063AT6(1) ELG827M080AQ1(1) ELG108M080AQ2(1) ELG108M080AR1(1) ELG128M080AQ2(1) ELG128M080AR1(1) ELG158M080AR3(1) ELG158M080AR2(1) ELG158M080AS1(1) ELG188M080AQ4(1) ELG188M080AR3(1) ELG188M080AS1(1) ELG228M080AQ5(1) ELG228M080AR3(1) ELG228M080AS2(1) ELG228M080AT1(1) ELG278M080AR5(1) ELG278M080AS3(1) ELG278M080AT2(1) ELG338M080AR6(1) ELG338M080AS4(1) ELG338M080AT2(1) ELG398M080AS5(1) ELG398M080AT3(1) ELG478M080AS6(1) ELG478M080AT4(1) ELG568M080AT5(1) ELG688M080AT6(1) ELG567M100AQ1(1) ELG687M100AQ1(1) ELG827M100AQ2(1) ELG827M100AR1(1) ELG108M100AQ3(1) ELG108M100AR2(1) ELG128M100AQ4(1) ELG128M100AR3(1) ELG128M100AS1(1) ELG158M100AQ5(1) ELG158M100AR4(1) ELG158M100AS2(1) ELG158M100AT1(1) ELG188M100AR5(1) ELG188M100AS3(1) ELG188M100AT2(1) ELG228M100AR6(1) ELG228M100AS4(1) ELG228M100AT2(1) ELG278M100AS5(1) VDC VDC Surge Rated Capacitance Case Size DF RC LC Part Number (1) Insert packaging code. See Ordering Options Table for available options. * When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 8 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Table 1A – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number 100 100 100 100 100 100 100 100 125 125 125 125 125 125 125 125 2700 3300 3300 3900 3900 4700 4700 6800 35 x 35 30 x 50 35 x 40 30 x 50 35 x 45 35 x 40 35 x 50 35 x 50 25 25 25 25 25 25 25 25 2.85 3.25 3.25 3.70 3.70 3.20 3.80 3.90 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 ELG278M100AT3(1) ELG338M100AS6(1) ELG338M100AT4(1) ELG398M100AS6(1) ELG398M100AT5(1) ELG478M100AT4(1) ELG478M100AT6(1) ELG688M100AT6(1) VDC VDC Surge Rated Capacitance Case Size DF RC LC Part Number Table 1B – Ratings & Part Number Reference Rated Capacitance Case Size 120 Hz 20°C D x L (mm) (µF) DF 120 Hz 20°C (tan δ %)* ESR Maximum 20 kHz 25°C (Ω) RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number VDC VDC Surge Voltage 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 180 180 180 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 225 225 225 220 270 330 330 390 390 470 470 470 560 560 560 560 680 680 680 820 820 820 820 1000 1000 1000 1200 1200 1200 1500 1500 1800 1800 1800 2200 2200 180 220 270 22 x 20 22 x 25 22 x 25 25 x 20 22 x 30 25 x 25 22 x 30 22 x 35 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 30 x 25 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 45 35 x 50 22 x 20 22 x 25 22 x 25 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 0.34 0.34 0.28 0.28 0.23 0.23 0.21 0.21 0.22 0.18 0.18 0.18 0.18 0.15 0.15 0.15 0.12 0.12 0.12 0.12 0.11 0.11 0.11 0.11 0.11 0.12 0.09 0.09 0.09 0.09 0.09 0.08 0.08 0.38 0.35 0.27 0.80 1.00 1.20 1.15 1.30 1.30 1.40 1.40 1.40 1.50 1.50 1.50 1.50 1.70 1.70 1.70 1.95 2.00 2.00 1.90 2.20 2.20 2.20 2.45 2.45 2.45 2.80 2.80 3.30 3.30 3.30 3.75 3.75 0.75 0.85 0.95 1.0 0.9 1.0 1.6 1.2 1.2 1.5 1.5 1.5 1.8 1.8 1.8 1.8 2.2 2.2 2.2 2.6 2.6 2.6 2.6 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 1.0 0.8 1.0 ELG227M160AQ7(1) ELG277M160AQ1(1) ELG337M160AQ1(1) ELG337M160AR7(1) ELG397M160AQ2(1) ELG397M160AR1(1) ELG477M160AQ2(1) ELG477M160AQ3(1) ELG477M160AR1(1) ELG567M160AQ3(1) ELG567M160AQ4(1) ELG567M160AR2(1) ELG567M160AS1(1) ELG687M160AQ5(1) ELG687M160AR3(1) ELG687M160AS1(1) ELG827M160AQ6(1) ELG827M160AR4(1) ELG827M160AS2(1) ELG827M160AT1(1) ELG108M160AR5(1) ELG108M160AS3(1) ELG108M160AT2(1) ELG128M160AR6(1) ELG128M160AS4(1) ELG128M160AT2(1) ELG158M160AS5(1) ELG158M160AT3(1) ELG188M160AS6(1) ELG188M160AT4(1) ELG188M160AT5(1) ELG228M160AT5(1) ELG228M160AT6(1) ELG187M180AQ7(1) ELG227M180AQ1(1) ELG277M180AQ1(1) VDC VDC Surge Rated Capacitance Case Size DF ESR RC LC Part Number (1) Insert packaging code. See Ordering Options Table for available options. * When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 9 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Table 1B – Ratings & Part Number Reference cont'd Rated Capacitance Case Size 120 Hz 20°C D x L (mm) (µF) DF 120 Hz 20°C (tan δ %)* ESR Maximum 20 kHz 25°C (Ω) RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number VDC VDC Surge Voltage 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 270 330 330 330 390 390 470 470 470 470 560 560 560 680 680 680 680 680 820 820 820 820 820 820 1000 1000 1000 1000 1000 1200 1200 1200 1200 1200 1500 1500 1500 1500 1800 1800 2200 2200 150 180 220 220 270 270 330 330 390 390 390 390 390 470 470 25 x 20 22 x 25 22 x 30 25 x 25 22 x 30 25 x 25 22 x 30 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 30 x 25 22 x 45 22 x 50 25 x 40 30 x 30 35 x 25 22 x 50 25 x 40 25 x 45 30 x 30 30 x 35 35 x 25 25 x 45 25 x 50 30 x 35 30 x 40 35 x 30 25 x 50 30 x 40 30 x 45 35 x 30 35 x 35 30 x 45 30 x 50 35 x 35 35 x 40 35 x 40 35 x 50 35 x 45 35 x 50 22 x 20 22 x 20 22 x 25 25 x 20 22 x 25 25 x 25 22 x 30 25 x 25 22 x 30 22 x 35 25 x 25 25 x 30 30 x 25 22 x 35 22 x 40 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 0.27 0.24 0.24 0.24 0.20 0.20 0.17 0.17 0.17 0.17 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.11 0.11 0.11 0.11 0.11 0.11 0.09 0.09 0.09 0.09 0.09 0.08 0.08 0.08 0.08 0.08 0.07 0.07 0.07 0.07 0.07 0.07 0.05 0.05 0.35 0.35 0.32 0.32 0.26 0.26 0.22 0.22 0.18 0.18 0.18 0.18 0.18 0.15 0.15 0.90 1.10 1.10 1.10 1.30 1.30 1.35 1.40 1.40 1.40 1.50 1.55 1.50 1.70 1.70 1.75 1.70 1.70 2.00 2.00 2.00 2.00 2.00 1.90 2.20 2.20 2.25 2.25 2.25 2.50 2.50 2.50 2.50 2.50 2.90 2.90 2.90 2.90 3.30 3.30 3.60 3.60 0.65 0.70 0.80 0.80 0.85 0.85 1.20 1.20 1.30 1.30 1.30 1.30 1.30 1.40 1.40 1.4 1.2 1.2 1.2 1.4 1.4 1.7 1.7 1.7 1.7 2.0 2.0 2.0 2.4 2.4 2.4 2.4 2.4 2.9 2.9 2.9 2.9 2.9 2.9 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 0.9 1.0 0.9 1.3 1.1 1.1 1.3 1.3 1.6 1.6 1.6 1.6 1.6 1.9 1.9 ELG277M180AR7(1) ELG337M180AQ1(1) ELG337M180AQ2(1) ELG337M180AR1(1) ELG397M180AQ2(1) ELG397M180AR1(1) ELG477M180AQ2(1) ELG477M180AQ3(1) ELG477M180AR2(1) ELG477M180AS1(1) ELG567M180AQ4(1) ELG567M180AR3(1) ELG567M180AS1(1) ELG687M180AQ5(1) ELG687M180AQ6(1) ELG687M180AR4(1) ELG687M180AS2(1) ELG687M180AT1(1) ELG827M180AQ6(1) ELG827M180AR4(1) ELG827M180AR5(1) ELG827M180AS2(1) ELG827M180AS3(1) ELG827M180AT1(1) ELG108M180AR5(1) ELG108M180AR6(1) ELG108M180AS3(1) ELG108M180AS4(1) ELG108M180AT2(1) ELG128M180AR6(1) ELG128M180AS4(1) ELG128M180AS5(1) ELG128M180AT2(1) ELG128M180AT3(1) ELG158M180AS5(1) ELG158M180AS6(1) ELG158M180AT3(1) ELG158M180AT4(1) ELG188M180AT4(1) ELG188M180AT6(1) ELG228M180AT5(1) ELG228M180AT6(1) ELG157M200AQ7(1) ELG187M200AQ7(1) ELG227M200AQ1(1) ELG227M200AR7(1) ELG277M200AQ1(1) ELG277M200AR1(1) ELG337M200AQ2(1) ELG337M200AR1(1) ELG397M200AQ2(1) ELG397M200AQ3(1) ELG397M200AR1(1) ELG397M200AR2(1) ELG397M200AS1(1) ELG477M200AQ3(1) ELG477M200AQ4(1) VDC VDC Surge Rated Capacitance Case Size DF ESR RC LC Part Number (1) Insert packaging code. See Ordering Options Table for available options. * When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 10 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Table 1B – Ratings & Part Number Reference cont'd Rated Capacitance Case Size 120 Hz 20°C D x L (mm) (µF) DF 120 Hz 20°C (tan δ %)* ESR Maximum 20 kHz 25°C (Ω) RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number VDC VDC Surge Voltage 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 470 470 560 560 560 560 680 680 680 680 820 820 820 820 1000 1000 1000 1000 1200 1200 1200 1200 1500 1800 120 150 180 180 220 220 220 270 270 270 270 270 330 330 330 330 390 390 390 390 470 470 470 470 470 470 560 560 560 560 680 680 680 25 x 30 30 x 25 22 x 40 22 x 45 25 x 35 30 x 30 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 25 x 50 30 x 35 35 x 30 30 x 40 30 x 45 35 x 30 35 x 35 30 x 45 30 x 50 35 x 35 35 x 40 35 x 45 35 x 50 22 x 20 22 x 25 22 x 25 25 x 20 22 x 25 22 x 30 25 x 25 22 x 30 22 x 35 25 x 25 25 x 30 30 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 40 22 x 45 25 x 35 30 x 30 22 x 45 22 x 50 25 x 35 25 x 40 30 x 30 35 x 25 25 x 45 30 x 30 30 x 35 35 x 30 25 x 50 30 x 35 30 x 40 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 0.15 0.15 0.13 0.13 0.12 0.12 0.12 0.12 0.12 0.13 0.10 0.10 0.10 0.10 0.09 0.09 0.09 0.09 0.08 0.08 0.08 0.08 0.07 0.06 0.66 0.49 0.37 0.37 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.22 0.23 0.23 0.23 0.19 0.19 0.19 0.19 0.16 0.16 0.16 0.17 0.17 0.17 0.13 0.13 0.13 0.13 0.11 0.11 0.11 1.40 1.50 1.55 1.55 1.55 1.55 1.75 1.75 1.75 1.70 2.05 2.05 2.00 2.05 2.30 2.30 2.30 2.30 2.60 2.60 2.65 2.65 3.10 3.50 0.60 0.65 0.80 0.75 0.95 0.95 0.95 1.15 1.15 1.15 1.15 1.15 1.25 1.25 1.20 1.25 1.50 1.50 1.50 1.50 1.55 1.55 1.55 1.55 1.55 1.55 1.80 1.80 1.80 1.80 1.95 2.00 2.00 1.9 1.9 2.2 2.2 2.2 2.2 2.7 2.7 2.7 2.7 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 0.9 0.7 0.9 1.3 1.1 1.1 1.1 1.3 1.3 1.3 1.3 1.3 1.6 1.6 1.6 1.6 1.9 1.9 1.9 1.9 2.3 2.3 2.3 2.3 2.3 2.3 2.8 2.8 2.8 2.8 3.0 3.0 3.0 ELG477M200AR2(1) ELG477M200AS1(1) ELG567M200AQ4(1) ELG567M200AQ5(1) ELG567M200AR3(1) ELG567M200AS2(1) ELG687M200AQ6(1) ELG687M200AR4(1) ELG687M200AS2(1) ELG687M200AT1(1) ELG827M200AR5(1) ELG827M200AR6(1) ELG827M200AS3(1) ELG827M200AT2(1) ELG108M200AS4(1) ELG108M200AS5(1) ELG108M200AT2(1) ELG108M200AT3(1) ELG128M200AS5(1) ELG128M200AS6(1) ELG128M200AT3(1) ELG128M200AT4(1) ELG158M200AT5(1) ELG188M200AT6(1) ELG127M250AQ7(1) ELG157M250AQ1(1) ELG187M250AQ1(1) ELG187M250AR7(1) ELG227M250AQ1(1) ELG227M250AQ2(1) ELG227M250AR1(1) ELG277M250AQ2(1) ELG277M250AQ3(1) ELG277M250AR1(1) ELG277M250AR2(1) ELG277M250AS1(1) ELG337M250AQ3(1) ELG337M250AQ4(1) ELG337M250AR2(1) ELG337M250AS1(1) ELG397M250AQ4(1) ELG397M250AQ5(1) ELG397M250AR3(1) ELG397M250AS2(1) ELG477M250AQ5(1) ELG477M250AQ6(1) ELG477M250AR3(1) ELG477M250AR4(1) ELG477M250AS2(1) ELG477M250AT1(1) ELG567M250AR5(1) ELG567M250AS2(1) ELG567M250AS3(1) ELG567M250AT2(1) ELG687M250AR6(1) ELG687M250AS3(1) ELG687M250AS4(1) VDC VDC Surge Rated Capacitance Case Size DF ESR RC LC Part Number (1) Insert packaging code. See Ordering Options Table for available options. * When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 11 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Table 1B – Ratings & Part Number Reference cont'd Rated Capacitance Case Size 120 Hz 20°C D x L (mm) (µF) DF 120 Hz 20°C (tan δ %)* ESR Maximum 20 kHz 25°C (Ω) RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number VDC VDC Surge Voltage 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 300 300 300 300 300 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 680 680 820 820 820 820 1000 1000 1200 1200 1500 56 68 82 82 100 100 120 120 120 150 150 150 180 180 180 180 220 220 220 220 270 270 270 330 330 390 390 470 560 47 56 68 68 82 82 100 100 120 120 120 150 150 150 150 150 180 35 x 30 35 x 35 30 x 40 30 x 45 35 x 30 35 x 35 35 x 35 35 x 40 35 x 40 35 x 45 35 x 50 22 x 20 22 x 25 22 x 25 25 x 20 22 x 30 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 30 30 x 25 22 x 45 25 x 30 25 x 35 30 x 30 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 30 x 40 35 x 35 30 x 45 35 x 35 35 x 40 35 x 45 22 x 20 22 x 20 22 x 25 25 x 20 22 x 30 25 x 25 22 x 35 25 x 30 22 x 35 25 x 30 30 x 25 22 x 40 25 x 30 25 x 35 30 x 30 35 x 25 22 x 50 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 0.11 0.11 0.11 0.11 0.11 0.11 0.09 0.09 0.08 0.08 0.07 1.25 0.89 0.72 0.72 0.60 0.60 0.51 0.51 0.51 0.41 0.41 0.41 0.34 0.34 0.34 0.34 0.29 0.29 0.29 0.29 0.25 0.25 0.25 0.21 0.21 0.18 0.18 0.15 0.11 1.420 1.210 0.852 0.852 0.706 0.706 0.582 0.582 0.485 0.485 0.485 0.388 0.388 0.388 0.388 0.388 0.323 2.00 2.00 2.15 2.15 2.10 2.10 2.30 2.30 2.45 2.45 3.63 0.40 0.45 0.55 0.50 0.70 0.70 0.75 0.75 0.75 0.80 0.85 0.85 0.90 0.90 0.90 0.90 1.05 1.05 1.00 1.05 1.20 1.20 1.20 1.35 1.35 1.50 1.50 1.70 1.90 0.35 0.40 0.50 0.50 0.60 0.65 0.65 0.65 0.70 0.70 0.75 0.80 0.85 0.85 0.85 0.80 0.95 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 0.6 0.5 0.6 0.9 0.7 0.7 0.8 0.8 0.8 1.0 1.0 1.0 1.3 1.3 1.3 1.3 1.5 1.5 1.5 1.5 1.9 1.9 1.9 2.3 2.3 2.7 2.7 3.0 3.0 0.60 0.70 0.50 0.80 0.60 0.60 0.80 0.80 1.00 1.00 1.00 1.20 1.20 1.20 1.20 1.20 1.40 ELG687M250AT2(1) ELG687M250AT3(1) ELG827M250AS4(1) ELG827M250AS5(1) ELG827M250AT2(1) ELG827M250AT3(1) ELG108M250AT3(1) ELG108M250AT4(1) ELG128M250AT4(1) ELG128M250AT5(1) ELG158M250AT6(1) ELG566M350AQ7(1) ELG686M350AQ1(1) ELG826M350AQ1(1) ELG826M350AR7(1) ELG107M350AQ2(1) ELG107M350AR1(1) ELG127M350AQ3(1) ELG127M350AR2(1) ELG127M350AS1(1) ELG157M350AQ4(1) ELG157M350AR2(1) ELG157M350AS1(1) ELG187M350AQ5(1) ELG187M350AR2(1) ELG187M350AR3(1) ELG187M350AS2(1) ELG227M350AQ6(1) ELG227M350AR4(1) ELG227M350AS2(1) ELG227M350AT1(1) ELG277M350AR5(1) ELG277M350AS3(1) ELG277M350AT2(1) ELG337M350AS4(1) ELG337M350AT3(1) ELG397M350AS5(1) ELG397M350AT3(1) ELG477M350AT4(1) ELG567M350AT5(1) ELG476M400AQ7(1) ELG566M400AQ7(1) ELG686M400AQ1(1) ELG686M400AR7(1) ELG826M400AQ2(1) ELG826M400AR1(1) ELG107M400AQ3(1) ELG107M400AR2(1) ELG127M400AQ3(1) ELG127M400AR2(1) ELG127M400AS1(1) ELG157M400AQ4(1) ELG157M400AR2(1) ELG157M400AR3(1) ELG157M400AS2(1) ELG157M400AT1(1) ELG187M400AQ6(1) VDC VDC Surge Rated Capacitance Case Size DF ESR RC LC Part Number (1) Insert packaging code. See Ordering Options Table for available options. * When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 12 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Table 1B – Ratings & Part Number Reference cont'd Rated Capacitance Case Size 120 Hz 20°C D x L (mm) (µF) DF 120 Hz 20°C (tan δ %)* ESR Maximum 20 kHz 25°C (Ω) RC 120 Hz 105°C (A) LC 20°C 5 Minutes (mA) Part Number VDC VDC Surge Voltage 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 180 180 180 220 220 220 270 270 270 330 330 390 390 390 470 470 560 680 56 68 68 82 82 82 100 100 100 120 120 120 120 150 150 150 150 180 180 180 220 220 220 270 270 330 330 390 470 680 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 35 30 x 45 35 x 35 30 x 40 30 x 50 35 x 40 30 x 50 35 x 45 35 x 50 35 x 60 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 30 x 30 35 x 25 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 35 x 60 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 0.323 0.323 0.323 0.265 0.265 0.265 0.242 0.242 0.242 0.195 0.195 0.165 0.165 0.165 0.130 0.130 0.112 0.092 1.230 0.937 0.937 0.768 0.768 0.768 0.628 0.628 0.628 0.532 0.532 0.532 0.532 0.425 0.425 0.425 0.425 0.354 0.354 0.354 0.287 0.287 0.287 0.266 0.266 0.214 0.214 0.180 0.145 0.110 0.95 0.90 0.95 1.05 1.05 1.10 1.20 1.20 1.20 1.40 1.35 1.55 1.55 1.55 1.75 1.75 1.90 2.15 0.40 0.50 0.50 0.55 0.55 0.55 0.65 0.60 0.65 0.70 0.70 0.70 0.70 0.80 0.80 0.75 0.75 0.85 0.85 0.85 1.00 1.00 1.00 1.15 1.15 1.40 1.40 1.55 1.70 2.10 1.40 1.40 1.40 1.80 1.80 1.80 2.20 2.20 2.20 2.60 2.60 3.00 3.00 3.00 3.00 3.00 3.00 3.00 0.5 0.6 0.6 0.7 0.7 0.7 0.9 0.9 0.9 1.1 1.1 1.1 1.1 1.3 1.3 1.3 1.3 1.6 1.6 1.6 2.0 2.0 2.0 2.4 2.4 3.0 3.0 3.0 3.0 3.0 ELG187M400AR4(1) ELG187M400AS2(1) ELG187M400AT1(1) ELG227M400AR5(1) ELG227M400AS3(1) ELG227M400AT2(1) ELG277M400AR6(1) ELG277M400AS4(1) ELG277M400AT3(1) ELG337M400AS5(1) ELG337M400AT3(1) ELG397M400AS4(1) ELG397M400AS6(1) ELG397M400AT4(1) ELG477M400AS6(1) ELG477M400AT5(1) ELG567M400AT6(1) ELG687M400AT8(1) ELG566M450AQ1(1) ELG686M450AQ2(1) ELG686M450AR1(1) ELG826M450AQ3(1) ELG826M450AR2(1) ELG826M450AS1(1) ELG107M450AQ4(1) ELG107M450AR2(1) ELG107M450AS1(1) ELG127M450AQ5(1) ELG127M450AR3(1) ELG127M450AS2(1) ELG127M450AT1(1) ELG157M450AQ6(1) ELG157M450AR4(1) ELG157M450AS2(1) ELG157M450AT1(1) ELG187M450AR5(1) ELG187M450AS3(1) ELG187M450AT2(1) ELG227M450AR6(1) ELG227M450AS4(1) ELG227M450AT2(1) ELG277M450AS5(1) ELG277M450AT3(1) ELG337M450AS6(1) ELG337M450AT4(1) ELG397M450AT5(1) ELG477M450AT6(1) ELG687M450AT8(1) VDC VDC Surge Rated Capacitance Case Size DF ESR RC LC Part Number (1) Insert packaging code. See Ordering Options Table for available options. * When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 13 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Mounting Positions (Safety Vent) In operation, electrolytic capacitors will always conduct a leakage current which causes electrolysis. The oxygen produced by electrolysis will regenerate the dielectric layer but, at the same time, the hydrogen released may cause the internal pressure of the capacitor to increase. The overpressure vent (safety vent) ensures that the gas can escape when the pressure reaches a certain value. All mounting positions must allow the safety vent to work properly. Installing • A general principle is that lower-use temperatures result in a longer, useful life of the capacitor. For this reason, it should be ensured that electrolytic capacitors are placed away from heat-emitting components. Adequate space should be allowed between components for cooling air to circulate, particularly when high ripple current loads are applied. In any case, the maximum category temperature must not be exceeded. • Do not deform the case of capacitors or use capacitors with a deformed case. • Verify that the connections of the capacitors are able to insert on the board without excessive mechanical force. • If the capacitors require mounting through additional means, the recommended mounting accessories shall be used. • Verify the correct polarization of the capacitor on the board. • Verify that the space around the pressure relief device is according to the following guideline: Case Diameter Space Around Safety Vent ≤ 16 mm > 16 mm to ≤ 40 mm > 40 mm > 2 mm > 3 mm > 5 mm It is recommended that capacitors always be mounted with the safety device uppermost or in the upper part of the capacitor. • If the capacitors are stored for a long time, the leakage current must be verified. If the leakage current is superior to the value listed in this catalog, the capacitors must be reformed. In this case, they can be reformed by application of the rated voltage through a series resistor approximately 1 kΩ for capacitors with VR ≤ 160 V (5 W resistor) and 10 kΩ for the other rated voltages. • In the case of capacitors connected in series, a suitable voltage sharing must be used. In the case of balancing resistors, the approximate resistance value can be calculated as: R = 60/C KEMET recommends, nevertheless, to ensure that the voltage across each capacitor does not exceed its rated voltage. Application and Operation Guidelines Electrical Ratings: Capacitance (ESC) Capacitance is measured by applying an alternate voltage of ≤ 0.5 V at a frequency of 120 or 100 Hz and 20°C. Temperature Dependence of the Capacitance Capacitance of an electrolytic capacitor depends upon temperature: with decreasing temperature the viscosity of the electrolyte increases, thereby reducing its conductivity. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 14 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Capacitance will decrease if temperature decreases. Furthermore, temperature drifts cause armature dilatation and, therefore, capacitance changes (up to 20% depending on the series considered, from 0 to 80°C). This phenomenon is more evident for electrolytic capacitors than for other types. Frequency Dependence of the Capacitance Effective capacitance value is derived from the impedance curve, as long as impedance is still in the range where the capacitance component is dominant. C= 1 2π fZ C = Capacitance (F) f = Frequency (Hz) Z = Impedance (Ω) Dissipation Factor tan δ (DF) Dissipation Factor tan δ is the ratio between the active and reactive power for a sinusoidal waveform voltage. It can be thought of as a measurement of the gap between an actual and ideal capacitor. reactive δ ideal actual active Tan δ is measured with the same set-up used for the series capacitance ESC. tan δ = ω x ESC x ESR where: ESC = Equivalent Series Capacitance ESR = Equivalent Series Resistance Equivalent Series Inductance (ESL) Self inductance or Equivalent Series Inductance results from the terminal configuration and internal design of the capacitor. Capacitor Equivalent Internal Circuit Equivalent Series Capacitance (ESC) Equivalent Series Resistance (ESR) Equivalent Series Inductance (ESL) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 15 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Co L Re Equivalent Series Resistance (ESR) Equivalent Series Resistance is the resistive component of the equivalent series circuit. ESR value depends on frequency and temperature and is related to the tan δ by the following equation: Ce ESR = tan δ 2πf ESC ESR = Equivalent Series Resistance (Ω) tan δ = Dissipation Factor ESC = Equivalent Series Capacitance (F) f = Frequency (Hz) Tolerance limits of the rated capacitance must be taken into account when calculating this value. Impedance (Z) L Re Co Impedance of an electrolytic capacitor results from a circuit formed by the following individual equivalent series components: Co Re L Ce Ce Co = Aluminum oxide capacitance (surface and thickness of the dielectric) Re = Resistance of electrolyte and paper mixture (other resistances not depending on the frequency are not considered: tabs, plates, etc.) Ce = Electrolyte soaked paper capacitance L = Inductive reactance of the capacitor winding and terminals Impedance of an electrolytic capacitor is not a constant quantity that retains its value under all conditions; it changes depending on frequency and temperature. Impedance as a function of frequency (sinusoidal waveform) for a certain temperature can be represented as follows: Z [ohm] 1000 100 1/ω ω Ce 10 B Re 1 0.1 ωL A 1/ω ω Co 0.1 1 10 C 100 1000 10000 F [KHz] © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 16 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC • Capacitive reactance predominates at low frequencies • With increasing frequency, capacitive reactance Xc = 1/ωCo decreases until it reaches the order of magnitude of electrolyte resistance Re(A) • At even higher frequencies, resistance of the electrolyte predominates: Z = Re (A - B) • When the capacitor’s resonance frequency is reached (ω0), capacitive and inductive reactance mutually cancel each other 1/ωCe = ωL, ω0 = C√1/LCe • Above this frequency, inductive reactance of the winding and its terminals (XL = Z = ωL) becomes effective and leads to an increase in impedance Generally speaking, it can be estimated that Ce ≈ 0.01 Co. Impedance as a function of frequency (sinusoidal waveform) for different temperature values can be represented as follows (typical values): Z (oh m ) 10 µF 1000 100 -4 0°C 10 2 0°C 8 5°C 1 0.1 0.1 1 10 100 1000 1 0 0 00 F (K HElectrolyte z) Re is the most temperature-dependent component of an electrolytic capacitor equivalent circuit. resistivity will decrease if temperature rises. In order to obtain a low impedance value throughout the temperature range, Re must be as little as possible. However, Re values that are too low indicate a very aggressive electrolyte, resulting in a shorter life of the electrolytic capacitor at high temperatures. A compromise must be reached. Leakage Current (LC) Due to the aluminum oxide layer that serves as a dielectric, a small current will continue to flow even after a DC voltage has been applied for long periods. This current is called leakage current. A high leakage current flows after applying voltage to the capacitor then decreases in a few minutes, e.g., after prolonged storage without any applied voltage. In the course of continuous operation, the leakage current will decrease and reach an almost constant value. After a voltage-free storage the oxide layer may deteriorate, especially at high temperature. Since there are no leakage currents to transport oxygen ions to the anode, the oxide layer is not regenerated. The result is that a higher than normal leakage current will flow when voltage is applied after prolonged storage. As the oxide layer is regenerated in use, the leakage current will gradually decrease to its normal level. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 17 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC The relationship between the leakage current and voltage applied at constant temperature can be shown schematically as follows: I VR VS VF V Where: VF = Forming voltage If this level is exceeded, a large quantity of heat and gas will be generated and the capacitor could be damaged. VR = Rated voltage This level represents the top of the linear part of the curve. VS = Surge voltage This lies between VR and VF. The capacitor can be subjected to VS for short periods only. Electrolytic capacitors are subjected to a reforming process before acceptance testing. The purpose of this preconditioning is to ensure that the same initial conditions are maintained when comparing different products. Ripple Current (RC) The maximum ripple current value depends on: • Ambient temperature • Surface area of the capacitor (heat dissipation area) tan δ or ESR • Frequency The capacitor’s life depends on the thermal stress. Frequency Dependence of the Ripple Current ESR and, thus, the tan δ depend on the frequency of the applied voltage. This indicates that the allowed ripple current is also a function of the frequency. Temperature Dependence of the Ripple Current The data sheet specifies maximum ripple current at the upper category temperature for each capacitor. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 18 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Expected Life Calculation Expected life depends on operating temperature according to the following formula: L = Lo x 2 (To-T)/10 Where: L: Expected life Lo: Load life at maximum permissible operating temperature T: Actual operating temperature To: Maximum permissible operating temperature This formula is applicable between 40°C and To. Packaging Quantities Size Code Q7 Q1 Q2 Q3 Q4 Q5 Q6 R7 R1 R2 R3 R4 R5 R6 Diameter (mm) Length (mm) Bulk Standard Leads 22 22 22 22 22 22 22 25 25 25 25 25 25 25 20 25 30 35 40 45 50 20 25 30 35 40 45 50 400 400 400 400 400 400 400 200 200 200 200 200 200 200 Size Code Diameter (mm) Length (mm) Bulk Standard Leads 30 30 30 30 30 30 35 35 35 35 35 35 35 25 30 35 40 45 50 25 30 35 40 45 50 60 200 200 200 200 200 200 200 200 200 200 200 200 200 S1 S2 S3 S4 S5 S6 T1 T2 T3 T4 T5 T6 T8 Standard Marking for Surface Mount Types • KEMET logo •Series • Operating temperature (°C) • Rated voltage (VDC) • Rated capacitance (µF) • Negative polarity: white line • Date code © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 19 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Construction The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact. Extended cathode Anode foil The deck, complete with terminals, is attached to the tabs and then folded down to rest on top of the winding. The complete winding is impregnated with electrolyte before being housed in a suitable container, usually an aluminum can, and sealed. Throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte. Each capacitor is aged and tested before being sleeved and packed. The purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. Aging is normally carried out at the rated temperature of the capacitor and is accomplished by applying voltage to the device while carefully controlling the supply current. The process may take several hours to complete. Damage to the oxide layer can occur due to variety of reasons: • Slitting of the anode foil after forming • Attaching the tabs to the anode foil • Minor mechanical damage caused during winding A sample from each batch is taken by the quality department after completion of the production process. The following tests are applied and may be varied at the request of the customer. In this case the batch, or special procedure, will determine the course of action. Electrical: • Leakage current • Capacitance • ESR • Impedance • Tan Delta Mechanical/Visual: • Overall dimensions • Torque test of mounting stud • Print detail • Box labels • Packaging, including packed quantity © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Foil tabs Tissues Cathode foil Etching Forming Winding Decking Impregnation Assembly Aging Testing Sleeving Packing A4021_ELG • 5/15/2014 20 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop’s Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-306-9353 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 21 Snap-In Aluminum Electrolytic Capacitors – ELG Series, +105ºC Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4021_ELG • 5/15/2014 22