Sensors OHD™ Series Thermal Guard Overview Applications The OHD™ Series Thermal Guard is developed for thermal problem countermeasures and safety standard conformity, which are becoming increasingly important for electronic devices in recent years. Typical applications include atmospheric temperature detection and overheating monitoring of power transistors, power modules, room heaters, hot gas heaters, PPCs, amplifiers, motors, HDDs, FDDs and other general appliances. Benefits • Extremely simple circuit design • High reliability for on/off operations • Compatibility with extremely low (0.1 mW or lower) signals to high power (6 W) levels • Compact, light and easy to handle • Dust, explosion and corrosion-proof • High-speed response • Wide range of operating temperatures available in 5°C increments from +30°C to +120°C Ordering Information OHD 1- 40 B Series Model Number Operating Temperature (°C) Contact Type OHD 1 3 5R 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 B = Break M = Make (OHD1 and OHD3 Series only) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com One world. One KEMET SE0202_OHD • 8/20/2015 1 Sensors – OHD™ Series Thermal Guard Dimensions in mm φ0.7 Maximum OHD1 Mounting Bracket Marked surface φ3.3 5.6 10.0 OHD1 Mounting surface 18.0 6.1 8.0 *Mounting brackets exclusively for the OHD1 type are provided optionally (at separate cost). 0.3 6.0 5.5 45.0 Maximum OHD3 OHD5R 6.7 φ3.2 2.65 Mounting surface 12.0 13.5 6.5 0.5 3.7 Mounting surface 2.65 0.5 10.0 φ3.2 1.0 φ6.2 5.0 3.0 Minimum 6.0 3.0 23.0 6.1 12.5 Maximum 6.0 27.0 Maximum 0.3 5.08 Environmental Compliance All OHD sensors are RoHS compliant. Insulation Characteristics 1 Series Insulation Withstand Voltage1 Minimum Insulation Resistance1 OHD1 2,500 VAC/1 minute or 3,000 VAC/1 second 500 VDC to 100 MΩ OHD3 2,500 VAC/1 minute or 3,000 VAC/1 second 500 VDC to 100 MΩ OHD5R 1,500 VAC /1 minute or 1,800 VAC /1 second 500 VDC to 100 MΩ Between terminals and mounting resin surface © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com SE0202_OHD • 8/20/2015 2 Sensors – OHD™ Series Thermal Guard Table 1 – Ratings & Part Number Reference Part Number Operating Temp. (°C) Contact Type Maximum Opening/ Closing Voltage (V) OHD1-40M OHD1-45M OHD1-50M OHD1-55M OHD1-60M OHD1-65M OHD1-70M OHD1-75M OHD1-80M OHD1-85M OHD1-90M OHD1-95M OHD1-100M OHD1-105M OHD1-110M OHD1-115M OHD1-120M OHD1-30B OHD1-35B OHD1-40B OHD1-45B OHD1-50B OHD1-55B OHD1-60B OHD1-65B OHD1-70B OHD1-75B OHD1-80B OHD1-85B OHD1-90B OHD1-95B OHD1-100B OHD1-105B OHD1-110B OHD1-115B OHD1-120B OHD3-40M OHD3-45M OHD3-50M OHD3-55M OHD3-60M OHD3-65M OHD3-70M OHD3-75M OHD3-80M OHD3-85M OHD3-90M OHD3-95M OHD3-100M OHD3-105M OHD3-110M OHD3-115M OHD3-120M OHD3-30B OHD3-35B OHD3-40B OHD3-45B OHD3-50B OHD3-55B 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 30 35 40 45 50 55 Make Make Make Make Make Make Make Make Make Make Make Make Make Make Make Make Make Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Make Make Make Make Make Make Make Make Make Make Make Make Make Make Make Make Make Break Break Break Break Break Break 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 110 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC Part Number Operating Temperature (°C) Contact Type Maximum Opening/ Closing Current (A) Maximum Opening/ Closing Power (W) Minimum Opening/ Closing Current Maximum Contact Resistance (mΩ) 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Maximum Opening/ Maximum Opening/ Maximum Opening/ Minimum Opening/ Maximum Contact Closing Voltage (V) Closing Current (A) Closing Power (W) Closing Current Resistance (mΩ) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com SE0202_OHD • 8/20/2015 3 Sensors – OHD™ Series Thermal Guard Table 1 – Ratings & Part Number Reference cont’d Part Number Operating Temp. (°C) Contact Type Maximum Opening/ Closing Voltage (V) OHD3-60B OHD3-65B OHD3-70B OHD3-75B OHD3-80B OHD3-85B OHD3-90B OHD3-95B OHD3-100B OHD3-105B OHD3-110B OHD3-115B OHD3-120B OHD5R-60B OHD5R-65B OHD5R-70B OHD5R-75B OHD5R-80B OHD5R-85B OHD5R-90B OHD5R-95B OHD5R-100B OHD5R-105B OHD5R-110B OHD5R-115B OHD5R-120B 60 65 70 75 80 85 90 95 100 105 110 115 120 60 65 70 75 80 85 90 95 100 105 110 115 120 Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break Break 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 100 AC/DC 30 DC 30 DC 30 DC 30 DC 30 DC 30 DC 30 DC 30 DC 30 DC 30 DC 30 DC 30 DC 30 DC Part Number Operating Temperature (°C) Contact Type Maximum Opening/ Closing Current (A) Maximum Opening/ Closing Power (W) Minimum Opening/ Closing Current Maximum Contact Resistance (mΩ) 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.3 AC/DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 0.1 DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 6 AC/DC 1 DC 1 DC 1 DC 1 DC 1 DC 1 DC 1 DC 1 DC 1 DC 1 DC 1 DC 1 DC 1 DC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 0.1 mA / 1 VDC 150 150 150 150 150 150 150 150 150 150 150 150 150 300 300 300 300 300 300 300 300 300 300 300 300 300 Maximum Opening/ Maximum Opening/ Maximum Opening/ Minimum Opening/ Maximum Contact Closing Voltage (V) Closing Current (A) Closing Power (W) Closing Current Resistance (mΩ) Precautions Before Using Thermal Guard • Please read specifications and check the content thoroughly before the actual use. • Do NOT use product under mechanical weight load. • Do NOT use with a greater load than specified. • Do NOT use in close proximity to strong magnetic parts and avoid exposure to a magnetic field. • Do NOT use if dropped or severely shocked. • The OHD1 and OHD5R are designed for printed circuit board insertion. The OHD3 is a reed wire soldered type. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com SE0202_OHD • 8/20/2015 4 Sensors – OHD™ Series Thermal Guard KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Wyboston, United Kingdom Tel: 44-1480-273082 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Northeast Wilmington, MA Tel: 978-658-1663 Southeast Lake Mary, FL Tel: 407-855-8886 Central Novi, MI Tel: 248-994-1030 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Irving, TX Tel: 972-915-6041 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com SE0202_OHD • 8/20/2015 5 Sensors – OHD™ Series Thermal Guard Disclaimer This product has been made available through a Private Label Agreement and a Development and Cross-Licensing Agreement between KEMET and NEC TOKIN to expand market and product offerings for both companies and their respective customers. For more information, please visit http://www.kemet.com/nectokin. All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com SE0202_OHD • 8/20/2015 6