F-3113 5/06 CERAMIC HIGH VOLTAGE, HIGH TEMPERATURE CAPACITORS Ceramic High Voltage, High Temperature Capacitors KEMET Series Performance Information Page 1-4 HT/HP 5-7 High Temperature, High Voltage Radial HV 8-9 High Voltage Conformally Coated Radial HV 10-14 High Voltage MIL-PRF-49467 (Equivalent) HV 15-17 High Voltage Space Quality HS 18-22 High Voltage Ceramic Chip 1515/1812/1825/2020/ 2225/2520/3333//3530 4040/4540/5440/5550/6560 23-27 SM20/SM21/SM22/SM23 SM24/SM25/SM26/SM30/ SM31/SM33/SM34/SM35/SM36 28-32 D30/40/50/75/90/100/120 33-34 High Voltage Disc Multiplie Stacks D30/40/50/75/90/100/120 35 High Voltage L & J Leaded High Voltage Disc © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com CERAMIC HIGH VOLTS & TEMPERATURE High Temperature, High Voltage Axial/Radial HIGH TEMPERATURE, HIGH VOLTAGE PERFORMANCE CHARACTERISTICS GENERAL SPECIFICATIONS ENVIRONMENTAL Working Voltage: C0G 50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k, 15k, 20k X7R 50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k, 15k, 20k, 30k, 40k, 50k X5U 3k, 4k, 5k, 7.5k, 10k, 15k, 20k Temperature Characteristics: C0G 0 + 30 PPM / °C from - 55°C to + 125°C (1) X7R + 15% from - 55°C to + 125°C X5U + 22%, -56% from -55°C to + 85°C Capacitance Tolerance: C0G +0.5pF, +1%, +2%, +5%, +10% X7R +10%, +20%, +80% / -20%, +100% / -0% X5U +10%, +20%, +80% / -20%, +100% / -0% Construction: Epoxy encapsulated - meets flame test requirements of UL Standard 94V-0. High-temperature solder - meets EIA RS-198, Method 302, Condition B (260°C for 10 seconds) Termination Material: Check individual Series: Part Number and Ordering Information for Termination Materials offered in each series. Solderability: MIL-STD 202, Method 208 (Test Method: ANSI/J-STD-002) Test A for through-hole mount and surface mount leaded. Test B for surface mount leadless components. Terminal Strength: MIL-STD 202, Method 208, Condition A (2.3kg or 5 lbs) Resistance to Solvents: MIL-STD 202, Method 215 Resistance to Soldering Heat: MIL-STD 202, Method 210, Test Condition C Vibration: MIL-STD 202, Method 204, Condition D (20g) Shock: MIL-STD 202, Method 213, Condition I (100g) Life Test: MIL-STD 202, Method 108 <200V C0G - 200% rated voltage @ +125°C X7R - 200% rated voltage @ +125°C >500V C0G - rated voltage @ +125°C X7R - rated voltage @ +125°C X5U - rated voltage @ +85°C Post Test Limits @ 25°C are: Capacitance Change: C0G (< 200V) - +3% or 0.25pF, whichever is greater. C0G (> 500V) - +3% or 0.50pF, whichever is greater. X7R - + 20% of initial value (2) Dissipation Factor: C0G - 0.25% maximum X7R & X5U - 3.0% maximum Insulation Resistance: C0G & X7R: 100 gigohm or 1 gigohm x uF, whichever is less. <500V test @ rated voltage, >1kV test @ 500V. ELECTRICAL Capacitance @ 25°C: Within specified tolerance and following test conditions per MILSTD 202, Method 305. C0G, X7R & X5U > 100pF with 1.0 vrms @ 1 kHz with 1.0 vrms < 100pF with 1.0 vrms @ 1 MHz with 1.0 vrms Dissipation Factor @ 25°C: Same test conditions as capacitance. C0G - 0.15% maximum X7R - 2.5% maximum X5U - 2.5% maximum Insulation Resistance @25°C: MIL-STD 202, Method 302 C0G & X7R: 100 gigohm or 1 gigohm x uF, whichever is less. <500V test @ rated voltage, >1kV test @ 500V. X5U: 10 gigohm or 100 megohm x uF, whichever is less. <500V test @ rated voltage, >1kV test @ 500V. Dielectric Withstanding Voltage: MIL-STD 202, Method 301 <200V test @ 250% of rated voltage 500V to 1250V test @ 150% of rated voltage >1251V test @ 120% of rated voltage X5U: 10 gigohm or 100 megohm x uF, whichever is less. <500V test @ rated voltage, >1kV test @ 500V. Moisture Resistance: MIL-STD 202, Method 106 Post Test Limits @ 25°C are: Capacitance Change: C0G (< 200V) - +3% or 0.25pF, whichever is greater. C0G (> 500V) - +3% or 0.50pF, whichever is greater. X7R - + 20% of initial value (2) Dissipation Factor: C0G - 0.25% maximum X7R & X5U - 3.0% maximum Insulation Resistance: C0G & X7R: 100 gigohm or 1 gigohm x uF, whichever is less. <500V test @ rated voltage, >1kV test @ 500V. X5U: 10 gigohm or 100 megohm x uF, whichever is less. <500V test @ rated voltage, >1kV test @ 500V. Thermal Shock: MIL-STD 202, Method 107, Condition A C0G & X7R: -55°C to 125°C X5U: -55°C to 85°C (1) (2) +53 PPM -30 PPM/ °C from +25°C to -55°C, + 60 PPM below 10pF. X7R & X5U dielectrics exhibit aging characteristics; therefore, it is highly recommended that capacitors be deaged for 2 hours at 150°C and stabilized at room temperature for 48 hours before capacitance measurements are made. 1 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com KEMET HIGH VOLTAGE TECHNICAL SUMMARY HIGH TEMPERATURE HIGH VOLTAGE Avionics X X Radar Systems X X MILITARY & AEROSPACE X Telemetry, Data Tx/Rx Control Systems X MEDICAL .5 to 1.5 Tesla MR1 & X NM1 Tuning Coils X 1 to 3 Tesla MR1 Gradient X Coils & Magnetic Rings X CT-Scanner X X Medical MRI X-Ray Generator X X SEMICONDUCTOR X RF Tuning Networks X RF Power Supplies Semiconductor Manufacturing X SECURITY Handheld Scanners X Intruder Detection Systems X Luggage Scanners X Metal/Explosive Detector X OTHER X LCD Backlight Inverter Electric Ballast for CFL X X Electric Ballast for Fluorescent Lamp X X Measurement Equipment X X Microwave/Convection Ovens X X X X POWER SUPPLY HV Power Supply X Power Station Equipment X Power Supply for Air Conditioner, Washing Machine Inverter Power Supply-AC X TELECOM Base Station Power amps X Broadcasting Equipment X MODEM DAA Modem X xDSL Modem X LAN, Router, HUB, Switches X RF Power Amplifiers X INDUSTRIAL Oil Rigging, Down Hole, Mining X X 2 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com KEMET HIGH VOLTAGE TECHNICAL SUMMARY ELECTRICAL Voltage Range Capacitance Range ENVIRONMENTAL Dissipation Factor Operating Temperature Range MECHANICAL Configuration CATALOG See page(s) for detail HIGH VOLTAGE 5 Radial Conformally Coated C0G/X7R: 500 to 10k VDC C0G:12 pF - .330µF X7R: 220 pF - 5.6 µF C0G: 0.15% max X7R: 2.5% max C0G: -55°C to + 125°C X7R: -55°C to + 125°C Radial Mil-PRF-49467 Equivalent C0G/X7R: 600 to 5k VDC C0G: 12 pF - .68 µF X7R: 27 pF - .47 µF C0G: 0.15% max X7R: 2.5% max C0G/X7R: -55°C to + 125°C Radial Space Quality C0G/X7R: 500 to 10k VDC C0G/X7R: 560 pF 2.20µF C0G: 0.15% max X7R: 2.5% max C0G/X7R: -55°C to + 125°C Radial Std 6 7-10 Ceramic Surface Mount Chip 11-13 Military C0G/X7R: 500 to 5k VDC C0G: 12 pF- .10 µF X7R: 270 pF -2.50 µF C0G: 0.15% max X7R: 2.5% max C0G/X7R: -55°C to + 125°C Chip Leaded Chips J or L lead C0G/X7R: 500 to 10k VDC C0G: 12 pF-.330 µF X7R: 220 pF-5.6 uF C0G: 0.15% max X7R: 2.5% max C0G/X7R: -55°C to + 125°C Leaded Chip J or L Lead Disc C0G/X5U: 3k to 20k VDC, X7R:3k to 50k VDC C0G: 1.2 pF-236 pF X7R: 10 p -7400 pF X5U: 80 pF-17300 pF C0G: 0.15% max X7R: 2.5% max X5U: 2.5% max C0G/X7R: -55°C to + 125°C X5U: -55°C to + 85°C Disc Disc Stack C0G/X7R/X5U: 5k to 20k VDC C0G: 1.2 pF-141 pF X7R: 37 pF-4400 pF X5U: 80 pF-10400 pF C0G: 0.15% max X7R: 2.5% max X5U: 2.5% max C0G/X7R: -55°C to + 125°C X5U: -55°C to + 85°C Disc Stack 14-16 17-19 HIGH TEMPERATURE 20-21 22-23 Hi Temp (HT/HP) 100 to 200 VDC C0G: 22 pF-.100 µF X7R:1000 pF-1.0µF C0G 0.15% X7R Type 2.0% X7R 2.50% -55°C to + 200°C Axial/Radial Hi Temp Hi Volt (HV) 500 to 4000 VDC C0G: 390 pF-.015 µF X7R:1400 pF- .270 µF C0G 0.15% X7R Type 2.0% X7R 2.50% -55°C to + 200°C Radial 2425 2627 Ceramic Cased Capacitor Std 125°C (SCR/SRR/SCA/SRA) 50 to 200 VDC C0G: 1.0 pF- .12 µF X7R:100 pF- 6.8 µF C0G 0.15% X7R 2.50% -55°C to + 125°C Axial/Radial 200°C (ACR/ARR/ACA/ARA) 50 to 100 VDC C0G: 1.0 pF- .12 µF X7R:100 pF- 3.3 µF C0G 0.15% X7R 2.50% -55°C to + 200°C Axial/Radial 260°C (TCR/TRR/TCA/TRA) 50 to 100 VDC C0G: 1.0 pF- .12 µF X7R:100 pF- 3.3 µF C0G 0.15% X7R 2.50% -55°C to + 260°C Axial/Radial Hi Temp Hi Volt (VCR/VRR) 500 to 5000 VDC C0G: 10 pF-.056 µF X7R:330 pF-1.2µF C0G 0.15% X7R 2.50% -55°C to + 200°C Radial 2831 3233 3435 3 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TECHNICAL SUMMARY DIELECTRIC COMPARISONS Features Dielectric Type Ultra Stable Semi-Stable High Voltage Semi-Stable Hi-Temp Temp/Volt Dependent C0G (NPO) X7R X7R type X5U Temperature Coefficient 0 ±30ppm/ºC ±15% +15/-40% +22-56% Operating Temp. Range -55 to +200ºC -55 to +125ºC -55 to +200ºC -55 to +125ºC 0.1% max. 2.5% max. 2.0% max. 2.5% max. None -2.0% max/dec. hour -2.0% max/dec. hour -2.0% max/dec. hour 25 to 20k VDC 50 to 50k VDC 25 to 4k VDC Up to 20K VDC Dissipation Factor Aging Rate Voltage Range Standard Tolerance Coefficient of Thermal Expansion @ 25ºC J, K, M K, M, P, Z K, M, P, Z M, P, Z 9 X 10-6 IN/IN ºC 11 X 10-6 IN/IN ºC 11 X 10-6 IN/IN ºC 11 X 10-6 IN/IN ºC TYPICAL INSULATION RESISTANCE VS. TEMP (C°) FOR C0G, NPO & X7R DIELECTRICS Ohm-Farads 10,000.00 1,000.00 100.00 10.00 25 75 125 175 225 275 325 TEMP (°C) 4 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH TEMPERATURE (+200ºC) AXIAL/RADIAL CERAMIC CAPACITORS HT/HP SERIES CAPACITOR OUTLINE DRAWING FEATURES L The HT/HP Series is used in robust applications W 1.25 Min. • Down Hole • Industrial • Harsh Environments H Where a Radial/Axial coated capacitor can withstand high temperatures (200°C). L 1.25 Min. D NOTE: Other tolerances, higher capacitance values, voltages, or special package configurations are available upon request. S DIMENSIONS Molded (HT) and Conformal Coated (HP), Radial Lead Types Style HT05 HT55 HT06 HT08 HT09 Sizes in Inches (mm) max Length (L) Height (H) Thickness (W) .200 (5.08) .200 (5.08) .100 (2.54) .200 (5.08) .200 (5.08) .100 (2.54) .300 (7.62) .300 (7.62) .150 (3.81) .500 (12.70) .500 (12.70) .250 (6.35) .700 (17.78) .400 (10.16) .200 (5.08) Tubular Case, Axial Lead Types Lead Spacing ±0.030 (S) .100 (2.54) .200 (5.08) .200 (5.08) .400 (10.16) .500 (12.70) Style HT11 HT13 HT14 HT15 HT16 Sizes in Inches (mm) max Length (L) Diameter (D) .170 (4.32) .100 (2.54) .260 (6.60) .135 (3.43) .400 (10.16) .155 (3.94) .500 (12.70) .200 (5.08) .750 (19.05) .375 (9.52) PART NUMBER AND ORDERING INFORMATION HT06 A W 472 K C STYLE OPTIONAL COPPER LEAD HT=Molded HP= Conformal Coated Solder coated. Add to part number only if required VOLTAGE A=25V B=50V C=100V D=200V TOLERANCE DIELECTRIC MATERIAL CAPACITANCE VALUE B, W=X7R type N=C0G (NP0) J=±5% K=±10% M=±20% Other tolerance available upon request MARKING (HT05, HT55, HT11) 472K KEC (All other sizes) HT06AW472K KEC Date Code First two digits are significant, last digit is number of zeros, i.e., 472=4700pF For CONFORMAL COATED types, change style number to HPXX. HP dimensions will be reduced slightly. 5 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH TEMPERATURE (+200ºC) AXIAL/RADIAL CERAMIC CAPACITORS HT/HP SERIES COG & X7R DIELECTRIC Radial Series C0G Radial Series X7R HT/HP05 HT/HP55 HT/HP06 HT/HP08 HT/HP09 HT/HP05 HT/HP55 HT/HP06 HT/HP08 HT/HP09 Wmax .200(5.08) .200(5.08) .300(7.62) .500(12.70) .700(17.78) Wmax .200(5.08) .200(5.08) .300(7.62) .500(12.70) .700(17.78) Hmax .200(5.08) .200(5.08) .300(7.62) .500(12.70) .400(10.16) Hmax .200(5.08) .200(5.08) .300(7.62) .500(12.70) .400(10.16) Tmax .100(2.54) .100(2.54) .150(3.81) .250(6.35) .200(5.08) Tmax .100(2.54) .100(2.54) .150(3.81) .250(6.35) .200(5.08) S +.030 .100(2.54) .200(5.08) .200(5.08) .400(10.16) 500(12.70) S +.030 .100(2.54) .200(5.08) .200(5.08) .400(10.16) 500(12.70) LeadDia. .025(.635) .025(.635) .025(.635) .025(.635) .025(.635) LeadDia. .025(.635) .025(.635) .025(.635) .025(.635) .025(.635) WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC Cap Cap Code Cap Cap Code 1.0pF 109 100pF 101 1.2 129 120 121 1.5 159 150 151 1.8 189 180 181 2.2 229 220 221 2.7 279 270 271 3.3 339 330 331 3.9 399 390 391 4.7 479 470 471 5.6 569 560 561 6.8 689 680 681 8.2 829 820 821 10 100 1000 102 12 120 1200 122 15 150 1500 152 18 180 1800 182 22 220 2200 222 27 270 2700 272 33 330 3300 332 39 390 3900 392 47 470 4700 472 56 560 5600 562 68 680 6800 682 82 820 8200 822 100 101 .010uF 103 120 121 .012 123 150 151 .015 153 180 181 .018 183 220 221 .022 223 270 271 .027 273 330 331 .033 333 390 391 .039 393 470 471 .047 473 560 561 .056 563 680 681 .068 683 820 821 .082 823 1000 102 .10 104 1200 122 .12 124 1500 152 .15 154 1800 182 .18 184 2200 222 .22 224 2700 272 .27 274 3300 332 .33 334 3900 392 .39 394 4700 472 .47 474 5600 562 .56 564 6800 682 .68 684 8200 822 .82 824 .010uF 103 1.0 105 .012 123 1.2 125 .015 153 1.5 155 .018 183 1.8 185 .022 223 2.2 225 .027 273 2.7 275 .033 333 3.3 335 .039 393 3.9 395 .047 473 4.7 475 .056 563 .068 683 .082 823 .10 104 .12 124 .15 154 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 6 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com 50 100 200 HIGH TEMPERATURE (+200ºC) AXIAL/RADIAL CERAMIC CAPACITORS HT/HP SERIES COG & X7R DIELECTRIC Radial Series C0G Radial Series X7R HT/HP05 HT/HP55 HT/HP06 HT/HP08 HT/HP09 HT/HP05 HT/HP55 HT/HP06 HT/HP08 HT/HP09 Wmax .200(5.08) .200(5.08) .300(7.62) .500(12.70) .700(17.78) Wmax .200(5.08) .200(5.08) .300(7.62) .500(12.70) .700(17.78) Hmax .200(5.08) .200(5.08) .300(7.62) .500(12.70) .400(10.16) Hmax .200(5.08) .200(5.08) .300(7.62) .500(12.70) .400(10.16) Tmax .100(2.54) .100(2.54) .150(3.81) .250(6.35) .200(5.08) Tmax .100(2.54) .100(2.54) .150(3.81) .250(6.35) .200(5.08) S +.030 .100(2.54) .200(5.08) .200(5.08) .400(10.16) 500(12.70) S +.030 .100(2.54) .200(5.08) .200(5.08) .400(10.16) 500(12.70) LeadDia. .025(.635) .025(.635) .025(.635) .025(.635) .025(.635) LeadDia. .025(.635) .025(.635) .025(.635) .025(.635) .025(.635) WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC Cap Cap Code Cap Cap Code 1.0pF 109 100pF 101 1.2 129 120 121 1.5 159 150 151 1.8 189 180 181 2.2 229 220 221 2.7 279 270 271 3.3 339 330 331 3.9 399 390 391 4.7 479 470 471 5.6 569 560 561 6.8 689 680 8.2 829 820 821 10 100 1000 102 12 120 1200 122 15 150 1500 152 18 180 1800 182 22 220 2200 222 27 270 2700 272 33 330 3300 332 39 390 3900 392 47 470 4700 472 56 560 5600 562 68 680 6800 682 82 820 8200 822 100 101 .010uF 103 120 121 .012 123 150 151 .015 153 180 181 .018 183 220 221 .022 223 270 271 .027 273 330 331 .033 333 390 391 .039 393 470 471 .047 473 560 561 .056 563 680 681 .068 683 820 821 .082 823 1000 102 .10 104 1200 122 .12 124 1500 152 .15 154 1800 182 .18 184 2200 222 .22 224 2700 272 .27 274 3300 332 .33 334 3900 392 .39 394 4700 472 .47 474 5600 562 .56 564 6800 682 .68 684 8200 822 .82 824 .010uF 103 1.0 105 .012 123 1.2 125 .015 153 1.5 155 .018 183 1.8 185 .022 223 2.2 225 .027 273 2.7 275 .033 333 3.3 335 .039 393 3.9 395 .047 473 4.7 475 .056 563 .068 683 .082 823 .10 104 .12 124 .15 154 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 681 7 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH TEMPERATURE (+200ºC), HIGH VOLTAGE RADIAL CERAMIC CAPACITORS HV SERIES CAPACITOR OUTLINE DRAWING FEATURES The HV series not only withstands high temperatures (200°C) , but also offers high voltage (500-4000 VDC) L To be used in robust applications T H • Down Hole • Industrial • Harsh Environments 1.25 Min. NOTE: Other tolerances, higher capacitance values, voltages, or special package configurations are available upon request. S DIMENSIONS Style HV10 HV11 HV12 HV13 HV14 HV15 HV16 Sizes in Inches (mm) max. Length (L) .250 (6.35) .320 (8.13) .420 (10.67) .520 (13.21) .620 (15.75) .720 (18.29) .820 (20.83) Height (H) .220 (5.59) .300 (7.62) .400 (10.16) .500 (12.70) .500 (12.70) .700 (17.78) .700 (17.78) Thickness (T) .150 (3.81) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) .300 (7.62) .350 (8.89) Lead Spacing ±0.030 (S) .170 (4.32) .200 (5.08) .300 (7.62) .400 (10.16) .500 (12.70) .600 (15.24) .700 (17.78) PART NUMBER AND ORDERING INFORMATION 10 HV12 B 472 VOLTAGE 05=500V 10=1000V 20=2000V 30=3000V 40=4000V K C M GROUP A SCREENING* Add to part number if required *MIL-PRF-49467 (Subgroup 1) except Corona OPTIONAL COPPER LEAD Solder coated. Add to part number only if required MARKING (HV10, HV11) 472M KEC Date Code STYLE HV12, etc TEMPERATURE COEFFICIENT B, W=X7R type N=C0G (NP0) TOLERANCE J=±5% K=±10% M=±20% Other tolerances available upon request (All other sizes) HV12B472M 1kV KEC Date Code CAPACITANCE VALUE First two digits are significant, last digit is number of zeros, i.e., 472=4700pF 8 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH TEMPERATURE (+200ºC), HIGH VOLTAGE RADIAL CERAMIC CAPACITORS HV SERIES COG DIELECTRIC 9 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE RADIAL CONFORMALLY COATED CERAMIC CAPACITORS HV SERIES CAPACITOR OUTLINE DRAWING L DIMENSIONS T HV20 HV21 HV22 HV23 HV24 HV25 HV26 HV30 HV31 HV33 HV34 HV35 HV36 H 1.25 Min. S Sizes in Inches (mm) max. Style .025 (22 ga.) solder plated Cu-clad Steel (CCFE) Length (L) Height (H) .250 (6.35) .320 (8.13) .370 (9.40) .470 (11.94) .570 (14.48) .670 (17.02) .770 (19.56) .450 (11.43) .550 (13.97) .850 (21.59) 1.050 (26.67) 1.250 (31.75) 1.450 (36.83) .220 (5.59) .280 (7.11) .300 (7.62) .400 (10.16) .500 (12.70) .600 (15.24) .720 (18.29) .220 (5.59) .280 (7.11) .400 (10.16) .500 (12.70) .600 (15.24) .720 (18.29) Thickness (T) .200 .250 .250 .270 .270 .270 .270 .200 .250 .270 .270 .270 .270 (5.08) (6.35) (6.35) (6.89) (6.89) (6.89) (6.89) (5.08) (6.35) (6.89) (6.89) (6.89) (6.89) Lead Spacing ±0.030 (S) .170 (4.32) .220 (5.59) .275 (6.98) .375 (9.52) .475 (12.06) .575 (14.60) .675 (17.14) .300 (7.62) .400 (10.16) .700 (17.78) .975 (24.76) 1.175 (29.84) 1.375 (34.92) PART NUMBER AND ORDERING INFORMATION 10 HV23 N 102 K M GROUP A SCREENING VOLTAGE 05 10 20 30 = 500V = 1000V = 2000V = 3000V Add to part number only if required MILPRF-49467 (subgroup1) except Corona 40 = 4000V 50 = 5000V 75 = 7500V 100 = 10000V TOLERANCE COG J=±5% K=±10% M=±20% STYLE HV23, etc. X7R K=±10% M=±20% P=0/+100% Z= -20/+80% Other tolerances available upon request DIELECTRIC MATERIAL CAPACITANCE VALUE N = COG (NPO) B = X7R First two digits are significant, last digit is number of zeros, i.e., 102=1000pF MARKING (HV20, HV21) 103K 1 kV KEC Date Code (All Other Sizes) HV24A103K 1 kV KEC Date Code 10 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE RADIAL CONFORMALLY COATED CERAMIC CAPACITORS HV SERIES COG DIELECTRIC 11 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE RADIAL CONFORMALLY COATED CERAMIC CAPACITORS HV SERIES COG DIELECTRIC 12 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE RADIAL CONFORMALLY COATED CERAMIC CAPACITORS HV SERIES X7R DIELECTRIC 13 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE RADIAL CONFORMALLY COATED CERAMIC CAPACITORS HV SERIES X7R DIELECTRIC 14 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE MIL-PRF-49467 (EQUIVALENT) HV SERIES FEATURES CAPACITOR OUTLINE DRAWING 1. Electrical characteristics and environmental information on these parts may be obtained by referring to MIL-PRF-49467. 2. All parts are conformal coated multilayer ceramic. 3. Designed to provide excellent long-term reliability. 4. Parts are Group A screened per MIL-PRF-49467 which includes 100% Corona testing and meet all other specification requirements. 5. Designed for surface, sea and airborne military and commercial high-reliability applications. 6. No IR degradation over life. 7. BR (X7R) V/TC is -40% at rated voltage and BZ (X7R) V/TC is -40% at 60% rated voltage. 8. BX characteristic (-25%) on BR parts is approximately 52% rated voltage. 9. 100% Non-destructive test by means of CSAM inspection available. SLAM available by special order. L W H 1.25 Min. S .025 (22 ga.) solder plated Cu-clad Steel (CCFE) DIMENSIONS Style HV60 HV61 HV62 HV63 HV64 HV65 HV66 HV68 HV69 Sizes in Inches (mm) max. Length (L) Height (H) .250 (6.35) .320 (8.13) .370 (9.40) .470 (11.94) .570 (14.48) .670 (17.02) .770 (19.56) 1.300 (33.02) 1.500 (38.10) .220 (5.59) .280 (7.11) .300 (7.62) .400 (10.16) .500 (12.70) .600 (15.24) .720 (18.29) .600 (15.24) .720 (18.29) Thickness (W) .200 .250 .250 .270 .270 .270 .270 .270 .270 (5.08) (6.35) (6.35) (6.86) (6.86) (6.86) (6.86) (6.86) (6.86) Lead Spacing ±0.030 (S) .170 (4.32) .220 (5.59) .275 (6.98) .375 (9.52) .475 (12.06) .575 (14.60) .675 (17.14) 1.175 (29.84) 1.375 (34.92) PART NUMBER AND ORDERING INFORMATION 10 HV60 R 102 K Voltage 06 10 20 30 = = = = 600V 1000V 2000V 3000V C C=CSAM 40 = 4000V 50 = 5000V S= SLAM Add to part number if required. Tolerance (C0G only) J=±5% K=±10% M=±20% Style HV60, etc. Dielectric Capacitance Value P = BP C0G (NP0) R = BR (X7R) Z = BZ (X7R) First two digits are significant, last digit is number of zeros, i.e., 102=1000pF MARKING (All Other Sizes) (HV60, HV61) 102K HV63R102K 1 kV 1 kV KEC KEC Date Code Date Code © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com 15 HIGH VOLTAGE MIL-PRF-49467 (EQUIVALENT) HV SERIES COG DIELECTRIC 16 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE MIL-PRF-49467 (EQUIVALENT) HV SERIES X7R DIELECTRIC 17 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC) HS SERIES CAPACITOR OUTLINE DRAWING FEATURES W L 1. Similar to NASA Spec. SSQ 21113 (1, 2 & 5kV). 2. Conforms to MIL-PRF-49467. (Group A Screening, Subgroup 1) 3. 100% Corona tested. 4. No IR degradation over life. 5. High density, low DF ceramic. 6. Conservative and proven design is recommended for non-repairable applications such as spacecraft. 7. CSAM inspections are available and is recommended for space applications. SLAM available by special order. 8. Burn-in in a non-contaminating inert fluid available. DIMENSIONS Sizes in Inches (mm) max. Length (L) Height (H) Thickness (W) Lead Spacing ±0.030 (S) HS20 .250 (6.35) .220 (5.59) .200 (5.08) .170 (4.32) HS21 .320 (8.13) .280 (7.11) .250 (6.35) .220 (5.59) HS22 .370 (9.40) .300 (7.62) .250 (6.35) .275 (6.98) HS30 .450 (11.43) .220 (5.59) .200 (5.08) .300 (7.62) HS23 .470 (11.94) .400 (10.16) .270 (6.89) .375 (9.52) HS31 .550 (13.97) .280 (7.11) .250 (6.35) .400 (10.16) HS24 .570 (14.48) .500 (12.70) .270 (6.89) .475 (12.06) HS25 .670 (17.02) .600 (15.24) .270 (6.89) .575 (14.60) HS26 .770 (19.56) .720 (18.29) .270 (6.89) .675 (17.14) HS33 .850 (21.59) .400 (10.16) .270 (6.89) .700 (17.78) HS34 1.050 (26.67) .500 (12.70) .270 (6.89) .975 (24.76) HS35 1.250 (31.75) .600 (15.24) .270 (6.89) 1.175 (29.84) HS36 1.450 (36.83) .720 (18.29) .270 (6.89) 1.375 (34.92) Style PART NUMBER AND ORDERING INFORMATION 10 VOLTAGE 05 = 500V 10 = 1000V 20 = 2000V 30 = 3000V HS24 B 103 K F INERT LIQUID (BURN-IN) Std. for >2kV; Add “F” if required for 500V or 1kV parts 40 = 4000V 50 = 5000V 75 = 7500V 100 = 10,000V C=CSAM S=SLAM Add to part number if required. STYLE HS24, etc. DIELECTRIC B = X7R N = BP C0G (NP0) CAPACITANCE VALUE First two digits are significant, last digit is number of zeros, i.e., 103=10000pF C MARKING (HS20, HV21) (All Other Sizes) 103K HS24B103K 1 kV 1 kV KEC KEC Date Code Date Code TOLERANCE J = ±5% (C0G only) K = ±10% M = ±20% P = 0/+100% Z = -20%/+80% 18 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC) HS SERIES COG DIELECTRIC 19 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC) HS SERIES COG DIELECTRIC 20 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC) HS SERIES X7R DIELECTRIC 21 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC) HS SERIES X7R DIELECTRIC 22 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE CERAMIC CHIP (+125ºC) Military Equivalent CERAMIC CHIP OUTLINE DRAWING FEATURES 1. The ceramic chip capacitors described in this section are the types used in our other high voltage ceramic multilayer product lines. 2. Types BP, BR and BZ available as described in MIL-PRF-49467. 3. Group A and B screening per MIL-PRF-49467 available. 4. Ceramic chip capacitors are extremely sensitive to thermal shock damage during installation. Wherever possible, processes involving infrared or vapor phase soldering systems should be utilized. 5. Higher voltages available upon request 6. Where nickel barrier termination is required, end band length dimensions may exceed the standard dimension listed. BW DIMENSIONS Style Length (L) Inches (mm) Width (W) Inches (mm) 1515 1812 1825 2020 2225 2520 3333 3530 4040 4540 5440 5550 6560 .150 ±.015 (3.81 ±.38) .180 ±.020 (4.57 ±.51) .180 ±.020 (4.57 ±.51) .200 ±.020 (5.08 ±.51) .220 ±.020 (5.59 ±.51) .250 ±.020 (6.35 ±.51) .330 ±.030 (8.38 ±.76) .350 ±.030 (8.89 ±.76) .400 ±.030 (10.2 ±.76) .450 ±.030 (11.43 ±.76) .540 ±.030 (13.7 ±.76) .550 ±.030 (14.0 ±.76) .650 ±.030 (16.5 ±.76) .150 .120 .250 .200 .250 .200 .330 .300 .400 .400 .400 .500 .600 ±.015 ±.015 ±.020 ±.020 ±.020 ±.020 ±.030 ±.030 ±.030 ±.030 ±.030 ±.030 ±.030 (3.81 (3.05 (6.35 (5.08 (6.35 (5.08 (8.38 (7.62 (10.2 (10.2 (10.2 (12.7 (15.2 Thickness (T) max Inches (mm) ±.38) ±.38) ±.51) ±.51) ±.51) ±.51) ±.76) ±.76) ±.76) ±.76) ±.76) ±.76) ±.76) .140 .100 .160 .180 .200 .180 .220 .220 .220 .220 .220 .220 .220 Bandwidth (BW) Inches .010 .010 .010 .010 .010 .030 .030 .030 .030 .030 .030 .030 .030 (3.55) (2.54) (4.07) (3.55) (5.08) (4.57) (5.59) (5.59) (5.59) (5.59) (5.59) (5.59) (5.59) - .030” .040” .040” .040” .040” .060” .060” .060” .060” .060” .060” .060” .060” RECOMMENDED SOLDER PAD PATTERN DIMENSIONS 5.20 5.90 5.90 6.50 7.00 8.68 10.91 11.51 12.88 14.21 16.51 18.92 19.80 0.205 0.232 0.232 0.256 0.276 0.342 0.430 0.453 0.507 0.559 0.650 0.745 0.780 1.90 2.30 2.30 2.80 3.30 4.98 7.11 7.61 8.88 10.15 10.41 12.82 13.20 0.075 0.091 0.091 0.110 0.130 0.196 0.280 0.300 0.350 0.400 0.410 0.505 0.520 4.34 3.70 6.90 5.62 6.80 5.62 9.27 8.51 11.05 11.05 11.05 13.59 16.13 0.171 0.146 0.272 0.221 0.268 0.221 0.365 0.335 0.435 0.435 0.435 0.535 0.635 1.65 1.80 1.80 1.85 1.85 1.85 1.90 1.95 2.00 2.03 3.05 3.05 3.30 0.065 0.071 0.071 0.073 0.073 0.073 0.075 0.077 0.079 0.080 0.120 0.120 0.130 T W 1515 1812 1825 2020 2225 2520 3333 3530 4040 4540 5440 5550 6560 L S L PART NUMBER AND ORDERING INFORMATION 4540 B 472 M 202 P M Style Group A Screening* 1515, 2020, etc. Add to part number if required *MIL-PRF-49467 (subgroup 1) except Corona Dielectric B or R = X7R N = C0G (NP0) Terminal Material P = PdAg S = Ag E = Ag/Ni/SnPb Plate C = Ag/Ni/Sn Plate Capacitance Value First two digits are significant, last digit is number of zeros, i.e., 472=4700pF Tolerance J = ±5% C0G (NP0) K = ±10% M = ±20% P = 0/+100% Z = -20%/+80% Voltage MARKING Not applicable As required by customer only. First two digits are significant, last digit is number of zeros, i.e., 202=2000V © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com 23 HIGH VOLTAGE CERAMIC CHIP (+125ºC) Military Equivalent C0G DIELECTRIC 24 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE CERAMIC CHIP (+125ºC) Military Equivalent C0G DIELECTRIC 25 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE CERAMIC CHIP (+125ºC) Military Equivalent X7R DIELECTRIC 26 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE CERAMIC CHIP (+125ºC) Military Equivalent X7R DIELECTRIC 27 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR SM SERIES CAPACITOR OUTLINE DRAWING FEATURES STANDARD 1. Silver plated copper alloy terminal for easy soldering. 2. Mounting tabs are designed to minimize the effect of thermal stress introduced by the differences in coefficient of thermal expansion between the capacitor and the mounting surface. 3. Low ESR. 4. High current discharge capability. 5. Group A and B screening per MIL-PRF-49467 available . 6. Standard lead configuration is 'B'.(J) If lead configuration is left out of part number the lead style is assumed to be 'B'. (L) (J) (L) (J) DIMENSIONS Style Length (L) Inches (mm) Width (W) Inches (mm) SM20 SM21 SM22 SM23 SM24 SM25 SM26 SM30 SM31 SM33 SM34 SM35 SM36 .150 ±.015 (3.81 ±.38) .200 ±.020 (5.08 ±.51) .250 ±.020 (6.35 ±.51) .350 ±.030 (8.89 ±.76) .450 ±.030 (11.43 ±.76) .550 ±.030 (14.00 ±.76) .650 ±.030 (16.50 ±.76) .300 ±.030 (7.62 ±.76) .400 ±.030 (10.20 ±.76) .700 ±.030 (17.08 ±.76) .900 ±.030 (22.90 ±.76) 1.100 ±.030 (27.90 ±.76) 1.350 ±.030 (33.00 ±.76) .150 ±.015 (3.81 ± .38) .200 ±.020 (5.08 ± .51) .200 ±.020 (5.08 ± .51) .300 ±.030 (7.62 ± .76) .400 ±.030 (10.20 ± .76) .500 ±.030 (12.70 ± .76) .600 ±.030 (15.20 ± .76) .150 ±.015 (3.81 ± .38) .200 ±.020 (5.08 ± .51) .300 ±.030 (7.62 ± .76) .400 ±.030 (10.20 ±. 76) .500 ±.030 (12.70 ±. 76) .600 ±.030 (15.20 ±. 76) Thickness (T) max Inches (mm) .130 .180 .180 .220 .220 .220 .220 .140 .130 .180 .220 .220 .220 (3.30) (4.57) (4.57) (5.59) (5.59) (5.59) (5.59) (3.55) (3.30) (4.57) (5.59) (5.59) (5.59) Tab (A) max Inches (mm) .100 .100 .100 .200 .300 .400 .500 .100 .100 .200 .300 .400 .500 (2.54) (2.54) (2.54) (5.08) (7.62) (10.2) (12.7) (2.54) (2.54) (5.08) (7.62) (10.2) (12.7) PART NUMBER AND ORDERING INFORMATION SM24 B 472 M 202 Style M Group A Screening* SM24, etc. Add to part number if required *MIL-PRF-49467 (subgroup 1) except Corona Dielectric B = X7R N = C0G (NP0) Capacitance Value Configuration First two digits are significant, last digit is number of zeros, i.e., 472=4700pF A=Config (L) B=Config (J) Voltage Tolerance J = ±5% C0G (NP0) K = ±10% M = ±20% P = 0/+100% Z = -20%/+80% A MARKING Not applicable As required by customer only. First two digits are significant, last digit is number of zeros, i.e., 202=2000V 28 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR SM SERIES C0G DIELECTRIC 29 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR SM SERIES C0G DIELECTRIC 30 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR SM SERIES X7R DIELECTRIC 31 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR SM SERIES X7R DIELECTRIC 32 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE DISC CERAMIC CAPACITOR D SERIES CAPACITOR OUTLINE DRAWING FEATURES Disc ceramic capacitors made under strict quality control procedures are a reliable component. Special attention is given to the ceramic pressing operation to assure high and uniform ceramic density. These parts are manufactured for the quality conscious customer. Parts are available screened to MIL-PRF-49467 established reliability specification. INSTALLATION Higher-voltage parts may require further encapsulation to prevent surface breakdown. Parts should be cleaned and oven dried at 85°C before further encapsulation. Silicone rubbers or an epoxy may be used. De-airing of encapsulants is recommended. We recommend that a heat sink be attached to the lead between the soldering iron and the capacitor during installation soldering. Testing of higher-voltage parts before encapsulation may be done in a suitable dielectric fluid such as Freon. DIELECTRIC COMPARISON CERAMIC TYPE C0G (NP0) X7R X5U 0.1% 2.5% 2.5% ±30ppm/ºC ±15% +22% -56% Dissipation Factor Temperature Coefficient Voltage Coefficient Dielectric Withstanding Voltage Test 0 -20% N/A 3 to 15kV at 1.5x rated, 20 to 50kV at rated +10kV 3 to 15kV at 1.5x rated, 20 to 50kV at rated +10kV 3 to 15kV at 1.5x rated, 20 to 50kV at rated +10kV 100k megohms or 1k megohms-µF, whichever is less 100k megohms or 1k megohms-µF, whichever is less 10k megohms or 100 megohms-µF, whichever is less -55ºC to +125ºC -55ºC to +125ºC -55ºC to +85ºC Insulation Resistance (25ºC) Operating Temperature Range (rated voltage) Thickness: Inches (mm) max. 3kV 5kV 7.5kV 10kV 15kV 20kV 30kV 40kV 50kV = = = = = = = = = 0.15 0.20 0.28 0.35 0.45 0.55 0.95 1.20 1.50 (3.81) (5.08) (7.11) (8.89) (11.43) (13.97) (24.13) (30.48) (38.10) Lead Type: Solder plated, copper-clad steel (CCFE)D30, D40: 0.025” (22GA) D50 & Larger: 0.032” (20GA) PART NUMBER AND ORDERING INFORMATION 30 D50 W M M Q No Leads Voltage Add to part number if required 30 =3000V 100 =10,000V etc. Group A Screening* Add to part number if required *MIL-PRF-49467 (subgroup 1) except Corona Style D50, etc. Dielectric N = C0G (NP0) W = X7R Y = X5U 122 Tolerance MARKING (D30) 301M 3kV KEC Date Code (All Other Sizes) D50W122M 3kV KEC Date Code J = ±5% C0G (NP0) K = ±10% M = ±20% P = 0/+100% Z = -20%/+80% Capacitance Value First two digits are significant, last digit is number of zeroes, i.e., 472=4700pF © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com 33 HIGH VOLTAGE DISC CERAMIC CAPACITOR D SERIES 3K VDC C0G (NP0) Min. Max. Disc Style D Max. S ±.030 D30 .30 .250 7.8pF 9.6pF D40 .40 .250 20pF 25pF D50 .50 .375 36pF 44pF D75 .75 .375 80pF 98pF D90 .90 .500 123pF D100 1.00 .500 D120 1.20 .500 D30 D40 D50 D75 D90 D100 D120 .30 .40 .50 .75 .90 1.00 1.20 D30 D40 D50 D75 D90 D100 D120 X7R X5U Min. Max. Min. Max. 250pF 300pF 520pF 700pF 630pF 770pF 1300pF 1800pF 1100pF 1400pF 2400pF 3200pF 2500pF 3100pF 5300pF 7200pF 150pF 3800pF 4700pF 8200pF 11000pF 145pF 178pF 4600pF 5600pF 9700pF 13000pF 193pF 236pF 6000pF 7400pF 12900pF 17300pF .250 .250 .375 .375 .500 .500 .500 4.7pF 12pF 21pF 48pF 74pF 87pF 116pF 5.7pF 15pF 26pF 59pF 90pF 107pF 141pF 150pF 380pF 670pF 1500pF 2300pF 2700pF 3600pF 180pF 460pF 820pF 1800pF 2800pF 3300pF 4400pF 310pF 810pF 1400pF 3200pF 4900pF 5800pF 7700pF 420pF 1100pF 1900pF 4300pF 6600pF 7800pF 10400pF .30 .40 .50 .75 .90 1.00 1.20 .250 .250 .375 .375 .500 .500 .500 3.1pF 8.1pF 14pF 32pF 49pF 58pF 77pF 100pF 250pF 450pF 1000pF 1500pF 1800pF 2400pF 120pF 310pF 550pF 1200pF 1900pF 2200pF 3000pF 210pF 540pF 950pF 2100pF 3300pF 3900pF 5100pF 280pF 720pF 1300pF 2900pF 4400pF 5200pF 6900pF D30 D40 D50 D75 D90 D100 D120 .30 .40 .50 .75 .90 1.00 1.20 .250 .250 .375 .375 .500 .500 .500 2.4pF 6.1pF 10.7pF 24pF 37pF 44pF 58pF 70pF 190pF 330pF 750pF 1200pF 1400pF 1800pF 90pF 230pF 410pF 920pF 1400pF 1700pF 2200pF 160pF 400pF 710pF 1600pF 2500pF 2900pF 3900pF 210pF 540pF 960pF 2200pF 3300pF 3900pF 5200pF D30 D40 D50 D75 D90 D100 D120 .30 .40 .50 .75 .90 1.00 1.20 .250 .250 .375 .375 .500 .500 .500 1.6pF 4.0pF 7.1pF 16pF 25pF 29pF 39pF 50pF 130pF 220pF 500pF 770pF 910pF 1200pF 60pF 150pF 270pF 610pF 940pF 1100pF 1500pF 100pF 270pF 480pF 1100pF 1600pF 1900pF 2600pF 140pF 360pF 640pF 1400pF 2200pF 2600pF 3500pF D30 D40 D50 D75 D90 D100 D120 .30 .40 .50 .75 .90 1.00 1.20 .250 .250 .375 .375 .500 .500 .500 1.2pF 3.0pF 5.3pF 12pF 18pF 22pF 29pF 37pF 100pF 170pF 380pF 580pF 680pF 910pF 45pF 120pF 200pF 460pF 700pF 830pF 1100pF 80pF 200pF 360pF 800pF 1200pF 1500pF 1900pF 110pF 270pF 480pF 1100pF 1600pF 2000pF 2600pF 5K VDC 7.5K VDC 3.8pF 9.9pF 17pF 39pF 60pF 71pF 94pF 10K VDC 2.9pF 7.4pF 13.1pF 29pF 45pF 53pF 71pF 15K VDC 1.9pF 4.9pF 8.7pF 20pF 30pF 36pF 47pF 20K VDC 1.4pF 3.7pF 6.5pF 15pF 22pF 27pF 35pF 30K, 40K & 50K VDC 34 Disc Style D Max. S ±.030 D30 D40 D50 D75 D90 D100 D120 .30 .40 .50 .75 .90 1.00 1.20 .250 .250 .375 .375 .500 .500 .500 30kVDC X7R Min. 20pF 60pF 110pF 250pF 380pF 460pF 600pF 40kDVC X7R Max. 30pF 80pF 140pF 310pF 470pF 560pF 740pF Min. 18pF 50pF 80pF 190pF 290pF 340pF 450pF 50kVDC X7R Max. 22pF 60pF 100pF 230pF 350pF 420pF 550pF Min. 10pF 40pF 70pF 150pF 230pF 270pF 360pF Max. 20pF 50pF 80pF 180pF 280pF 330pF 440pF © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com HIGH VOLTAGE DISC MULTIPLIER STACKS FEATURES CAPACITOR OUTLINE DRAWING 1. Special lead configurations available. 2. Custom designs are available upon request. D dimension - See previous page for capacitance/voltage desired and resulting diameter. L DIMENSION INCHES (MM) MAX. Number of Selections 2 3 4 5 6 .40 .55 .70 .80 .95 S ±0.030 (±.76) 7.5k VDC Voltage per Section 10k VDC 15k VDC .50 (12.70) .70 (17.78) .85 (21.59) 1.10 (27.94) 1.30 (33.02) .60 (15.24) .85 (21.59) 1.10 (27.94) 1.30 (33.02) 1.55 (39.07) .90 (22.86) 1.15 (29.21) 1.45 (36.83) 1.80 (45.72) 2.15 (54.61) .18 (4.57) .23 (5.84) .33 (8.35) 5k VDC (10.16) (13.97) (17.78) (20.32) (24.13) .13 (3.30) 20k VDC 1.00 1.55 1.90 2.30 2.75 (25.40) (39.07) (48.26) (58.42) (69.85) .43 (10.92) PART NUMBER AND ORDERING INFORMATION 4X 100 D90 W 102 Tolerance Number of Sections J = ±5% C0G (NP0) K = ±10% M = ±20% P = 0/+100% Z = -20%/+80% Voltage 30 = 3000V 50 = 5000 V 75 = 7500 V K 100 =10,000V 150 = 15,000 V 200 =20,000 V Style Capacitance Value D50, etc. First two digits are significant, last digit is number of zeros, i.e., 102=1000pF Dielectric N = C0G (NP0) W = X7R Y = X5U (D30) 301M 3kV KEC Date Code MARKING (All Other Sizes) 4XD50W122M 3kV KEC Date Code 35 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com