M0420SD204MDAR1C VacuumFluorescentDisplayModule RoHSCompliant NewhavenDisplayInternational,Inc. 2511TechnologyDrive,Suite101 ElginIL,60124 Ph:8478448795 Fax:8478448796 www.newhavendisplay.com [email protected] [email protected] DOCUMENT NO. REV. NO PAGE 1.0 2/14 1. SCOPE: 2. FEATURES: 2.1 Simple connection to the host system. Either parallel or serial input interface can be selected. In case of serial input, it is possible to choose 300 to 19,200 bps by combination of soldering Switches (P0-P1). 2.2 Since a DC/DC converter is used, only +5VDC power source is required to operate the module. 2.3 One chip micom offer ASCII(96 characters)+European(126 characters) or ASCII + Japanese Katakana(126 characters) Font. 2.4 Four brightness levels can be selected by dimming function. 2.5 High quality blue-green(505 nm) vacuum fluorescent display provides an attractive and readable Medium. Other colors can be achieved by simple wavelength filters. 2.6 Characters are provided with a 5h7 dot matrix. 2.7 The module has up to sixteen user definable characters. 3. GENERAL DESCRIPTIONS 3.1 This specification becomes effective after being approved by the purchaser. 3.2 When any conflict is found in the specification, appropriate action shall be taken Upon agreement of both parties. 3.3 The expected necessary service parts should be arranged by the customer before the completion of profucion. 4. PRODUCT SPECIFICATIONS 4.1 Type Table_1 Type VFM204MDAR1-O 5h7 dot matrix. Digit Format 4.2 Outer Dimensions, Weight (See Fig_3 for details) Table_2 Parameter Outer Dimensions Weight Width Height Thickness Specification 150.0f1.0 64.0f1.0 28.6 Max Typical 140 Unit mm mm mm g DOCUMENT NO. REV. NO 1.0 PAGE 4/14 DOCUMENT NO. REV. NO 1.0 PAGE 5/14 DOCUMENT NO. REV. NO 1.0 PAGE 6/14 DOCUMENT NO. REV. NO 1.0 PAGE 7/14 DOCUMENT NO. REV. NO 1.0 PAGE 8/14 DOCUMENT NO. REV. NO 1.0 PAGE 9/14 DOCUMENT NO. REV. NO 1.0 PAGE 10/14 DOCUMENT NO. REV. NO 1.0 STANDARD SPECIFICATION FOR APPROVAL DOCUMENT NO. REV. NO PAGE 11/14 PAGE NAME 1.0 12/14 13/14 14/14